Closed rzerres closed 2 months ago
Hi,
I'll try to respond quickly :
1) no, the box is for RJ11 version. It may fit, but I suggest you to investigate the openscad version : PCB_box_generator_v1-1.scad 2) Yes, the controller is fully compatible with hassio as it runs esphome. 3)
ESP32-WROOM-32D or U version (with external antenna) has to be bought elsewhere than JLCPCB cause the price in JLCPCB is huge. You may find your needs in aliexpress or others.
The controller works in proportionnal mode. The temperature difference between target temp and real temp triggers a movement every 15 minutes. There is a version of firmware with a PID controll. You can control it with hassio or standalone. You'll find futher informations on https://github.com/nliaudat/floor-heating-controller/wiki/
4) For the Ac power, most proportionnal valves use 3.3V as esp32. I'll recommend to use HKL-5M03 or HKL-PM03 Actually, if you buy the HKL-XX component at JLCPC, the weight is misscalculated and the freight cost is huge. I'll recommend you to buy it separatly and solder yourself.
Have a look at https://github.com/Lenti84/VdMot_Controller before buying one of mine. You may have the choice of 2 solutions.
Regards
Thanks. This advise is quite helpful.
One more question: Vendor documentation states ESP32-WROOM-32D and ESP32-WROOM-32U deprecated. If I did read correctly, ESP32WROOM32E and ESP32WROOM32UE are their successors. Will the firmware will work without adaption?
Thanks. This advise is quite helpful.
One more question: Vendor documentation states ESP32-WROOM-32D and ESP32-WROOM-32U deprecated. If I did read correctly, ESP32WROOM32E and ESP32WROOM32UE are their successors. Will the firmware will work without adaption?
All boards supported by platformio and esp-idf frameworks should compile esphome.
https://docs.platformio.org/en/latest/platforms/espressif32.html#boards
I have not found any devkit with 32E version (aka ECO V3) actually. Perhaps it's better to stick with a common devkit
A) The second solution
I did look up and read about the VdMot_Controller . I guess he tried to make it a professional product. But it seems that that kind of development is a to specific neeche to actualy create a cache cow. Development has salled as well. You can order the PCB, but there are no Hardcovers. So you need to start the 3d printout by yourself anyway. And the Price .... well, all worth the work. But why not stick to your approach?
B) DEVBoard
I found this one at:
It is pin compatible to the referenced standard ESP32 devkit and is available without shipment from China.
3) Easyeda / Ordering Sadly , the easyeda sources are not available anymore. I can imagine that you have invested quite a bit of time to reach the given status. And I'd like to thank you again for your effort.
For myself it would be a perfect fit and I would like to give it a try. I can order and assemble it myself. I don't think, that any person or company will take the "Gerber files" to start a commercial project, but kindly ask to get them. Otherwise I don't see an easy way to let it produce by JLCPCP. I could order the requested minimum for latest Controller PCP (here: v58 rev 1.49) and forward the assembled ones to you to have some stock?
Same for the box, since the STL's are available.
Looking forward for your answer.
PS: Once everything is working, I will go and improve the merged HOWTO_get_going/README to help interested upcoming DIY fans go get it done without hassle.
Hi,
I'm surprised at the price of the card at Reichelt, which is over €10... I would still advise you to stick with a well-known card (ESP32-WROOM-32D 38p) available on Aliexpress for example. You'll find one for 3€.
With the Gerber files, you can order a PCB from anywhere. I don't give the EasyEda sources any more, because some people made modifications, ordered and then complained that it didn't work.
What's more, no one has proposed any public changes to the PCB board in 5 years.
I also no longer support older versions because some components are no longer available. You must use the latest version: https://github.com/nliaudat/esp32_8ch_motor_shield/releases/tag/v58_rev_1.52 Unzip it and you'll find the files you need to ordrer.
Regards
Thanks. I will go with that.
And i completely understand Not offering the gerbers any more. Quite offending If someone changes the layout then complains and requires your Support. Not in line with Open source Code of conduct.
Thanks. I will go with that.
And i completely understand Not offering the gerbers any more. Quite offending If someone changes the layout then complains and requires your Support. Not in line with Open source Code of conduct.
I offer the gerbers ! The schematics and all you need. But not the EasyEda source : https://github.com/nliaudat/esp32_8ch_motor_shield/releases/tag/v58_rev_1.52
Try to improve the ordering via JLPCB
Dear Nicolas,
This is great work.
Since I'm rebuilding an apartment, I'd like to use this PCB to control my newly installed underfloor heating. I was amazed and completely satisfied when i got hold of this repository. I do have 4 circles that should be managed via individual porportional actors. The given documentation my be a bit rough for newcomers like me. So i took the time to prepare a PR that introduces an "HOWTO_get_going.md". I will submit it once i finished some last shaping.
May you can enlight me to solve following questions: