Got a Telldus F007TPH sensor. Want to put it in the winecooler, however does not seems to be supported?
So would be awesome if you could look into it : )
Found the following data on it:
This sensor should be received by the RFXtrx with the FineOffset protocol enabled. Check with RFXmngr and enable only FineOffset and use the latest firmware. Contact rfxcom support if the sensor is not received by your RFXtrx.Random forum regarding the technology
And these binaries. I'm no programmer, so I'm unsure if it's relevant.
Audacity files show that the first bit (starter bit) is a little bit longer than other short bits (0) and longer bits (1) are quite much longer. Gaps between pulses are fixed.
There is a pin for unit behind the device. It only affects what the device is showing. There is no battery status bit in the data, at least not found with multiple different batteries.
Hi,
Got a Telldus F007TPH sensor. Want to put it in the winecooler, however does not seems to be supported? So would be awesome if you could look into it : )
Found the following data on it:
This sensor should be received by the RFXtrx with the FineOffset protocol enabled. Check with RFXmngr and enable only FineOffset and use the latest firmware. Contact rfxcom support if the sensor is not received by your RFXtrx.
Random forum regarding the technologyAnd these binaries. I'm no programmer, so I'm unsure if it's relevant. Audacity files show that the first bit (starter bit) is a little bit longer than other short bits (0) and longer bits (1) are quite much longer. Gaps between pulses are fixed.
There is a pin for unit behind the device. It only affects what the device is showing. There is no battery status bit in the data, at least not found with multiple different batteries.
gfile001.data: channel=7; sensor id=1; temperature=-7.5°C; humidity=N/A gfile003.data: channel=2; sensor id=1; temperature=21.0°C; humidity=45%
A Github Repo for 433 testsThanks!