ghost
commented
3 years ago @saeed-moghimi-noaa @WPringle @ps2epsi @JaimeCalzadaNOAA
Closed ghost closed 3 years ago
ghost
commented
3 years ago @saeed-moghimi-noaa @WPringle @ps2epsi @JaimeCalzadaNOAA
ghost
commented
3 years ago I am currently running the same configuration with NEMS + ADCIRC to see if the same error persists there
ghost
commented
3 years ago configure_besttrack.json{
"storm_id": "sandy2012",
"start_date": null,
"end_date": null,
"fort22_filename": null,
"nws": 20,
"attributes": {
"NWS": null,
"BLADj": null,
"_storm_id": null,
"geofactor": null,
"start_date": null,
"end_date": null
}
}fort.22AL, 18,2012102206, , BEST, 0, 135N, 782W, 25, 1003, LO, 0, , 0, 0, 0, 0, 1008, 225, 75, , , , , ,224, 6, INVEST , 1
AL, 18,2012102212, , BEST, 6, 131N, 786W, 30, 1002, TD, 0, , 0, 0, 0, 0, 1007, 250, 75, , , , , ,194, 4, EIGHTEEN , 2
AL, 18,2012102218, , BEST, 12, 127N, 787W, 35, 1000, TS, 34, NEQ, 50, 60, 0, 0, 1007, 250, 60, , , , , ,109, 3, EIGHTEEN , 3
AL, 18,2012102300, , BEST, 18, 126N, 784W, 40, 998, TS, 34, NEQ, 50, 60, 0, 0, 1007, 250, 40, , , , , , 44, 4, SANDY , 4
AL, 18,2012102306, , BEST, 24, 129N, 781W, 40, 998, TS, 34, NEQ, 70, 80, 0, 0, 1005, 240, 60, , , , , , 21, 5, SANDY , 5
AL, 18,2012102312, , BEST, 30, 134N, 779W, 40, 995, TS, 34, NEQ, 100, 100, 0, 0, 1005, 240, 60, , , , , , 26, 7, SANDY , 6
AL, 18,2012102318, , BEST, 36, 140N, 776W, 45, 993, TS, 34, NEQ, 100, 120, 0, 0, 1005, 240, 60, , , , , , 23, 8, SANDY , 7
AL, 18,2012102400, , BEST, 42, 147N, 773W, 55, 990, TS, 34, NEQ, 100, 150, 40, 40, 1007, 300, 60, , , , , , 12, 9, SANDY , 8
AL, 18,2012102400, , BEST, 42, 147N, 773W, 55, 990, TS, 50, NEQ, 0, 70, 0, 0, 1007, 300, 60, , , , , , 12, 9, SANDY , 8
AL, 18,2012102406, , BEST, 48, 156N, 771W, 60, 987, TS, 34, NEQ, 100, 150, 50, 50, 1007, 300, 45, , , , , , 11, 10, SANDY , 9
AL, 18,2012102406, , BEST, 48, 156N, 771W, 60, 987, TS, 50, NEQ, 50, 70, 20, 20, 1007, 300, 45, , , , , , 11, 10, SANDY , 9
AL, 18,2012102412, , BEST, 54, 166N, 769W, 65, 981, HU, 34, NEQ, 120, 160, 70, 70, 1006, 285, 40, , , , , , 10, 11, SANDY , 10
AL, 18,2012102412, , BEST, 54, 166N, 769W, 65, 981, HU, 50, NEQ, 50, 60, 40, 30, 1006, 285, 40, , , , , , 10, 11, SANDY , 10
AL, 18,2012102412, , BEST, 54, 166N, 769W, 65, 981, HU, 64, NEQ, 20, 20, 0, 0, 1006, 285, 40, , , , , , 10, 11, SANDY , 10
AL, 18,2012102418, , BEST, 60, 176N, 767W, 75, 972, HU, 34, NEQ, 150, 180, 70, 70, 1005, 290, 25, , , , , , 25, 13, SANDY , 11
AL, 18,2012102418, , BEST, 60, 176N, 767W, 75, 972, HU, 50, NEQ, 50, 60, 40, 40, 1005, 290, 25, , , , , , 25, 13, SANDY , 11
AL, 18,2012102418, , BEST, 60, 176N, 767W, 75, 972, HU, 64, NEQ, 25, 30, 20, 25, 1005, 290, 25, , , , , , 25, 13, SANDY , 11
AL, 18,2012102419, , BEST, 61, 179N, 766W, 75, 971, HU, 34, NEQ, 150, 180, 70, 70, 1005, 290, 25, , , , , , 11, 12, , 12
AL, 18,2012102419, , BEST, 61, 179N, 766W, 75, 971, HU, 50, NEQ, 50, 60, 40, 40, 1005, 290, 25, , , , , , 11, 12, , 12
AL, 18,2012102419, , BEST, 61, 179N, 766W, 75, 971, HU, 64, NEQ, 25, 30, 20, 25, 1005, 290, 25, , , , , , 11, 12, , 12
AL, 18,2012102500, , BEST, 66, 189N, 764W, 85, 964, HU, 34, NEQ, 180, 240, 70, 70, 1005, 300, 15, , , , , , 19, 13, SANDY , 13
AL, 18,2012102500, , BEST, 66, 189N, 764W, 85, 964, HU, 50, NEQ, 50, 60, 40, 40, 1005, 300, 15, , , , , , 19, 13, SANDY , 13
AL, 18,2012102500, , BEST, 66, 189N, 764W, 85, 964, HU, 64, NEQ, 30, 30, 25, 25, 1005, 300, 15, , , , , , 19, 13, SANDY , 13
AL, 18,2012102505, , BEST, 71, 200N, 760W, 100, 954, HU, 34, NEQ, 240, 240, 70, 120, 1005, 300, 15, , , , , , 0, 10, , 14
AL, 18,2012102505, , BEST, 71, 200N, 760W, 100, 954, HU, 50, NEQ, 50, 60, 40, 40, 1005, 300, 15, , , , , , 0, 10, , 14
AL, 18,2012102505, , BEST, 71, 200N, 760W, 100, 954, HU, 64, NEQ, 30, 30, 25, 25, 1005, 300, 15, , , , , , 0, 10, , 14
AL, 18,2012102506, , BEST, 72, 201N, 760W, 100, 954, HU, 34, NEQ, 240, 240, 70, 120, 1005, 300, 10, , , , , , 19, 17, SANDY , 15
AL, 18,2012102506, , BEST, 72, 201N, 760W, 100, 954, HU, 50, NEQ, 50, 60, 40, 40, 1005, 300, 10, , , , , , 19, 17, SANDY , 15
AL, 18,2012102506, , BEST, 72, 201N, 760W, 100, 954, HU, 64, NEQ, 25, 20, 20, 20, 1005, 300, 10, , , , , , 19, 17, SANDY , 15
AL, 18,2012102509, , BEST, 75, 209N, 757W, 95, 960, HU, 34, NEQ, 240, 240, 70, 180, 1005, 300, 10, , , , , , 13, 16, , 16
AL, 18,2012102509, , BEST, 75, 209N, 757W, 95, 960, HU, 50, NEQ, 50, 60, 40, 40, 1005, 300, 10, , , , , , 13, 16, , 16
AL, 18,2012102509, , BEST, 75, 209N, 757W, 95, 960, HU, 64, NEQ, 25, 20, 20, 20, 1005, 300, 10, , , , , , 13, 16, , 16
AL, 18,2012102512, , BEST, 78, 217N, 755W, 95, 966, HU, 34, NEQ, 240, 240, 70, 240, 1005, 320, 20, , , , , , 7, 16, SANDY , 17
AL, 18,2012102512, , BEST, 78, 217N, 755W, 95, 966, HU, 50, NEQ, 60, 60, 40, 50, 1005, 320, 20, , , , , , 7, 16, SANDY , 17
AL, 18,2012102512, , BEST, 78, 217N, 755W, 95, 966, HU, 64, NEQ, 30, 30, 20, 20, 1005, 320, 20, , , , , , 7, 16, SANDY , 17
AL, 18,2012102518, , BEST, 84, 233N, 752W, 90, 963, HU, 34, NEQ, 270, 270, 120, 270, 1005, 350, 20, , , , , ,340, 16, SANDY , 18
AL, 18,2012102518, , BEST, 84, 233N, 752W, 90, 963, HU, 50, NEQ, 60, 60, 40, 50, 1005, 350, 20, , , , , ,340, 16, SANDY , 18
AL, 18,2012102518, , BEST, 84, 233N, 752W, 90, 963, HU, 64, NEQ, 30, 30, 20, 20, 1005, 350, 20, , , , , ,340, 16, SANDY , 18
AL, 18,2012102600, , BEST, 90, 248N, 759W, 75, 965, HU, 34, NEQ, 300, 300, 160, 270, 1007, 375, 20, , , , , ,333, 10, SANDY , 19
AL, 18,2012102600, , BEST, 90, 248N, 759W, 75, 965, HU, 50, NEQ, 70, 60, 40, 60, 1007, 375, 20, , , , , ,333, 10, SANDY , 19
AL, 18,2012102600, , BEST, 90, 248N, 759W, 75, 965, HU, 64, NEQ, 30, 30, 20, 30, 1007, 375, 20, , , , , ,333, 10, SANDY , 19
AL, 18,2012102606, , BEST, 96, 257N, 764W, 70, 968, HU, 34, NEQ, 300, 300, 160, 240, 1006, 380, 30, , , , , ,327, 8, SANDY , 20
AL, 18,2012102606, , BEST, 96, 257N, 764W, 70, 968, HU, 50, NEQ, 90, 70, 50, 70, 1006, 380, 30, , , , , ,327, 8, SANDY , 20
AL, 18,2012102606, , BEST, 96, 257N, 764W, 70, 968, HU, 64, NEQ, 30, 20, 0, 60, 1006, 380, 30, , , , , ,327, 8, SANDY , 20
AL, 18,2012102612, , BEST, 102, 264N, 769W, 65, 970, HU, 34, NEQ, 360, 240, 170, 240, 1008, 420, 70, , , , , ,336, 7, SANDY , 21
AL, 18,2012102612, , BEST, 102, 264N, 769W, 65, 970, HU, 50, NEQ, 90, 80, 90, 120, 1008, 420, 70, , , , , ,336, 7, SANDY , 21
AL, 18,2012102612, , BEST, 102, 264N, 769W, 65, 970, HU, 64, NEQ, 0, 0, 0, 90, 1008, 420, 70, , , , , ,336, 7, SANDY , 21configure_adcirc.json{
"adcirc_executable_path": "/scratch2/COASTAL/coastal/save/shared/repositories/ADC-WW3-NWM-NEMS/ADCIRC/work/padcirc",
"adcprep_executable_path": "/scratch2/COASTAL/coastal/save/shared/repositories/ADC-WW3-NWM-NEMS/ADCIRC/work/adcprep",
"modeled_start_time": "2012-10-22 06:00:00",
"modeled_end_time": "2012-10-26 11:00:00",
"modeled_timestep": 7.0,
"fort_13_path": "/scratch2/COASTAL/coastal/save/shared/models/meshes/hsofs/120m/Subsetted_Florence2018_Test/fort.13",
"fort_14_path": "/scratch2/COASTAL/coastal/save/shared/models/meshes/hsofs/120m/Subsetted_Florence2018_Test/fort.14",
"tidal_spinup_duration": 1058400.0,
"tidal_spinup_timestep": 7.0,
"source_filename": "/scratch2/COASTAL/coastal/save/shared/repositories/ADC-WW3-NWM-NEMS/modulefiles/envmodules_intel.hera",
"use_original_mesh": false,
"output_surface": true,
"surface_output_interval": 3600.0,
"output_stations": false,
"stations_file_path": null,
"stations_output_interval": 360.0,
"output_spinup": true,
"output_elevations": true,
"output_velocities": true,
"output_concentrations": false,
"output_meteorological_factors": false,
"processors": 600,
"nems_parameters": {},
"attributes": {
...
"gwce_solution_scheme": "semi-implicit",
...
"smagorinsky": true,
...
}
}fort.15 and hotstart fort.15diff spinup/fort.15 runs/unperturbed/fort.151c1
< created on 2021-05-05 15:47 ! RUNDES - 32 CHARACTER ALPHANUMERIC RUN DESCRIPTION
---
> created on 2021-05-05 15:48 ! RUNDES - 32 CHARACTER ALPHANUMERIC RUN DESCRIPTION
6c6
< 0 ! IHOT - HOT START PARAMETER
---
> 567 ! IHOT - HOT START PARAMETER
21,22c21,22
< 0 ! NWS - WIND STRESS AND BAROMETRIC PRESSURE OPTION PARAMETER
< 1 ! NRAMP - RAMP FUNCTION OPTION
---
> 20 ! NWS - WIND STRESS AND BAROMETRIC PRESSURE OPTION PARAMETER
> 8 ! NRAMP - RAMP FUNCTION OPTION
28,29c28,30
< 12.25 ! RNDAY - TOTAL LENGTH OF SIMULATION (IN DAYS)
< 12.25 ! DRAMP - DURATION OF RAMP FUNCTION (IN DAYS)
---
> 2012 10 22 06 18 0.9 1 ! WTIMINC - meteorological data time increment
> 16.4583 ! RNDAY - TOTAL LENGTH OF SIMULATION (IN DAYS)
> 12.250 0.000 0.000 0.000 12.250 12.250 1.000 0.000 12.250 ! DRAMP - DURATION OF RAMP FUNCTION (IN DAYS)
4934,4935c4935,4939
< -5 0.000000 12.250000 514 ! NOUTGE TOUTSGE TOUTFGE NSPOOLGE - GLOBAL ELEVATION OUTPUT INFO (UNIT 63)
< -5 0.000000 0.000000 514 ! NOUTGV TOUTSGV TOUTFGV NSPOOLGV - GLOBAL VELOCITY OUTPUT INFO (UNIT 64)
---
> 0 0 0 0 ! NOUTM TOUTSM TOUTFM NSPOOLM - METEOROLOGICAL STATION OUTPUT INFO (UNITS 71/72)
> 0 ! NSTAM - TOTAL NUMBER OF METEOROLOGICAL RECORDING STATIONS
> -5 0.000000 16.458333 514 ! NOUTGE TOUTSGE TOUTFGE NSPOOLGE - GLOBAL ELEVATION OUTPUT INFO (UNIT 63)
> -5 0.000000 16.458333 514 ! NOUTGV TOUTSGV TOUTFGV NSPOOLGV - GLOBAL VELOCITY OUTPUT INFO (UNIT 64)
> 0 0.000000 0.000000 0 ! NOUTGM TOUTSGM TOUTFGM NSPOOLGM - GLOBAL METEOROLOGICAL OUTPUT INFO
4939c4943
< 5 151200 ! NHSTAR NHSINC - HOT START FILE GENERATION PARAMETERS
---
> 0 0 ! NHSTAR NHSINC - HOT START FILE GENERATION PARAMETERSfort.15 and working BestTrack fort.15diff /scratch2/COASTAL/coastal/save/shared/saeed/best_track_runs_from_orion/Florence2018/fort.15.hotstart runs/unperturbed/fort.151,38c1,37
< created on 2021-04-09 14:38 ! RUNDES
< OceanMesh2D ! RUNID
< 1 ! NFOVER
< 1 ! NABOUT
< 100 ! NSCREEN
< 567 ! IHOT
< 2 ! ICS
< 511112 ! IM
< 1 ! NOLIBF
< 2 ! NOLIFA
< 1 ! NOLICA
< 1 ! NOLICAT
< 6 ! NWP
< primitive_weighting_in_continuity_equation
< quadratic_friction_coefficient_at_sea_floor
< internal_tide_friction
< subgrid_barrier
< surface_directional_effective_roughness_length
< sea_surface_height_above_geoid
< 1 ! NCOR
< 1 ! NTIP
< 20 ! NWS
< 8 ! NRAMP
< 9.81 ! gravitational acceleration
< -3 ! TAU0
< 2.000000 ! DTDP
< 0 ! STATIM
< 0 ! REFTIM
< 2018 09 10 00 06 0.9 1 ! WTIMINC - meteorological data time increment
< 13.5 ! RNDAY
< 5.000 0.000 0.000 0.000 5.000 5.000 1.000 0.000 5.000 ! DRAMP
< 0 1 0 ! A00 B00 C00
< 0.01 0 0 0.01 ! H0 ? ? VELMIN
< -80.8143 30.3328 ! SLAM0 SFEA0
< 0.0025 ! FFACTOR
< -0.2 ! smagorinsky coefficient
< 0 ! CORI
< 8 ! NTIF
---
> created on 2021-05-05 15:48 ! RUNDES - 32 CHARACTER ALPHANUMERIC RUN DESCRIPTION
> NOMAD mesh v1e MSL ! RUNID - 24 CHARACTER ALPANUMERIC RUN IDENTIFICATION
> 1 ! NFOVER - NONFATAL ERROR OVERRIDE OPTION
> 1 ! NABOUT - ABREVIATED OUTPUT OPTION PARAMETER
> 100 ! NSCREEN - UNIT 6 OUTPUT OPTION PARAMETER
> 567 ! IHOT - HOT START PARAMETER
> 2 ! ICS - COORDINATE SYSTEM SELECTION PARAMETER
> 511113 ! IM - MODEL SELECTION PARAMETER
> 1 ! NOLIBF - BOTTOM FRICTION TERM SELECTION PARAM; before NWP==1, '2' was used
> 2 ! NOLIFA - FINITE AMPLITUDE TERM SELECTION PARAMETER
> 1 ! NOLICA - SPATIAL DERIVATIVE CONVECTIVE SELECTION PARAMETER
> 1 ! NOLICAT - TIME DERIVATIVE CONVECTIVE TERM SELECTION PARAMETER
> 5 ! NWP - VARIABLE BOTTOM FRICTION AND LATERAL VISCOSITY OPTION PARAMETER; default 0
> mannings_n_at_sea_floor
> primitive_weighting_in_continuity_equation
> surface_canopy_coefficient
> surface_directional_effective_roughness_length
> surface_submergence_state
> 1 ! NCOR - VARIABLE CORIOLIS IN SPACE OPTION PARAMETER
> 1 ! NTIP - TIDAL POTENTIAL OPTION PARAMETER
> 20 ! NWS - WIND STRESS AND BAROMETRIC PRESSURE OPTION PARAMETER
> 8 ! NRAMP - RAMP FUNCTION OPTION
> 9.81 ! G - ACCELERATION DUE TO GRAVITY - DETERMINES UNITS
> -3 ! TAU0 - WEIGHTING FACTOR IN GWCE; original, 0.005
> 7.000000 ! DTDP - TIME STEP (IN SECONDS)
> 0 ! STATIM - STARTING TIME (IN DAYS)
> 0 ! REFTIM - REFERENCE TIME (IN DAYS)
> 2012 10 22 06 18 0.9 1 ! WTIMINC - meteorological data time increment
> 16.4583 ! RNDAY - TOTAL LENGTH OF SIMULATION (IN DAYS)
> 12.250 0.000 0.000 0.000 12.250 12.250 1.000 0.000 12.250 ! DRAMP - DURATION OF RAMP FUNCTION (IN DAYS)
> 0.5 0.5 0 ! A00 B00 C00 - TIME WEIGHTING FACTORS FOR THE GWCE EQUATION
> 0.01 0 0 0.01 ! H0 NODEDRYMIN NODEWETRMP VELMIN
> -77.0775 32.4507 ! SLAM0 SFEA0 - CENTER OF CPP PROJECTION (NOT USED IF ICS=1, NTIP=0, NCOR=0)
> 0.0025 ! FFACTOR
> -0.2 ! smagorinsky coefficient - LATERAL EDDY VISCOSITY COEFFICIENT; IGNORED IF NWP =1
> 0 ! CORI - CORIOLIS PARAMETER - IGNORED IF NCOR = 1
> 8 ! NTIF - NUMBER OF TIDAL POTENTIAL CONSTITUENTS BEING FORCED starting 2008082300
...
...
...
< 110 ! ANGINN
< -5 5 13.5 180 ! NOUTE TOUTSE TOUTFE NSPOOLE
< 397 ! NSTAE
< -64.7033 32.3734 ! 2695540
< -66.9826 44.9045 ! 8410140
< -67.1085 44.8711 ! 8410714
< -67.125 44.9199 ! 8410715
< -67.1407 45.1301 ! 8410834
...
< -67.1692 18.214 ! 9759394
< -67.1685 18.4557 ! 9759412
< -67.1903 18.1638 ! 9759421
< -67.9936 18.107 ! 9759938
< -61.8446 17.5546 ! 9761115
< 0 0 0 0 ! NOUTV TOUTSV TOUTFV NSPOOLV
< 0 ! NSTAV
< 0 0 0 0 ! NOUTM TOUTSM TOUTFM NSPOOLM
< 0 ! NSTAM
< -5 5.000000 13.500000 1800 ! NOUTGE TOUTSGE TOUTFGE NSPOOLGE
< 0 0.000000 0.000000 0 ! NOUTGV TOUTSGV TOUTFGV NSPOOLGV
< 0 0.000000 0.000000 0 ! NOUTGM TOUTSGM TOUTFGM NSPOOLGM
< 0 ! NFREQ
< 0 0 0 0 ! THAS THAF NHAINC FMV
< 0 0 0 0 ! NHASE NHASV NHAGE NHAGV
< 0 0 ! NHSTAR NHSINC
< 1 0 1E-08 25 ! ITITER ISLDIA CONVCR ITMAX
< ! NCPROJ
< ! NCINST
< ! NCSOUR
< ! NCHIST
< ! NCREF
< ! NCCOM
< ! NCHOST
< ! NCONV
< ! NCCONT
< 2018-09-05 00:00 ! Forcing start date / NCDATE
---
> 3.60371262e-03 1.97085192e+02
> 110 ! ANGINN - INNER ANGLE THRESHOLD
> 0 0 0 0 ! NOUTE TOUTSE TOUTFE NSPOOLE - ELEV STATION OUTPUT INFO (UNIT 61)
> 0 ! NSTAE - TOTAL NUMBER OF ELEVATION RECORDING STATIONS
> 0 0 0 0 ! NOUTV TOUTSV TOUTFV NSPOOLV - VELOCITY STATION OUTPUT INFO (UNIT 62)
> 0 ! NSTAV - TOTAL NUMBER OF VELOCITY RECORDING STATIONS
> 0 0 0 0 ! NOUTM TOUTSM TOUTFM NSPOOLM - METEOROLOGICAL STATION OUTPUT INFO (UNITS 71/72)
> 0 ! NSTAM - TOTAL NUMBER OF METEOROLOGICAL RECORDING STATIONS
> -5 0.000000 16.458333 514 ! NOUTGE TOUTSGE TOUTFGE NSPOOLGE - GLOBAL ELEVATION OUTPUT INFO (UNIT 63)
> -5 0.000000 16.458333 514 ! NOUTGV TOUTSGV TOUTFGV NSPOOLGV - GLOBAL VELOCITY OUTPUT INFO (UNIT 64)
> 0 0.000000 0.000000 0 ! NOUTGM TOUTSGM TOUTFGM NSPOOLGM - GLOBAL METEOROLOGICAL OUTPUT INFO
> 0 ! NFREQ
> 0 0 0 0 ! THAS THAF NHAINC FMV - HARMONIC ANALYSIS PARAMETERS
> 0 0 0 0 ! NHASE NHASV NHAGE NHAGV - CONTROL HARMONIC ANALYSIS AND OUTPUT TO UNITS 51,52,53,54
> 0 0 ! NHSTAR NHSINC - HOT START FILE GENERATION PARAMETERS
> 1 0 1E-08 25 ! ITITER ISLDIA CONVCR ITMAX - ALGEBRAIC SOLUTION PARAMETERS
> ! NCPROJ - PROJECT TITLE
> ! NCINST - PROJECT INSTITUTION
> ! NCSOUR - PROJECT SOURCE
> ! NCHIST - PROJECT HISTORY
> ! NCREF - PROJECT REFERENCES
> ! NCCOM - PROJECT COMMENTS
> ! NCHOST - PROJECT HOST
> ! NCONV - CONVENTIONS
> ! NCCONT - CONTACT INFORMATION
> 2012-10-10 00:00 ! NCDATE - forcing start date
WPringle
commented
3 years ago @zacharyburnettNOAA can you show me the PE0000/fort.16 error message too? I suspect it is the error in fort.22 without running aswip on it.
WPringle
commented
3 years ago Did you run aswip on the fort.22?
./aswip -n 20 -m 4 -z 2
WPringle
commented
3 years ago Left is original fort.22 and right is after running aswip that is needed for NWS=20 option (NWS=8 will work with original fort.22)
ghost
commented
3 years ago @zacharyburnettNOAA can you show me the PE0000/fort.16 error message too?
sure thing, here
runs/unperturbed/fort.16INFO: openFileForRead: Searching for file to open on unit 15...
INFO: openFileForRead: The file 'fort.15' was found. The file will be opened.
INFO: openFileForRead: The file 'fort.15' was opened successfully.
INFO: readFort015prep: The subdomainModeling capability is not active.
ECHO: readFort015prep: subdomainOn= F
INFO: read15: The timeBathyControl namelist was not found.
INFO: read15: The metControl namelist was not found.
INFO: read15: The waveCoupling namelist was not found.
INFO: read15: The owiWindNetcdf namelist was not found.
INFO: read15: The wetDryControl namelist was not found.
INFO: read15: The inundationOutput namelist was not found.
INFO: read15: End-of-file when searching for dynamicWaterLevelCorrectionControl namelist.
INFO: read15: The Smag_Control namelist was not found.
INFO: read15: The WarnElev namelist was not found.
INFO: read15: The AliDispersion namelist was not found.
INFO: read15: The density control namelist was not found.
INFO: initNodalDataFile: Initialized "fort.63.nc" file.
INFO: initNodalDataFile: Initialized "fort.64.nc" file.
INFO: initNodalDataFile: Initialized "maxele.63.nc" file.
INFO: initNodalDataFile: Initialized "maxvel.63.nc" file.
INFO: initWindModule: Subdomain fort.22 files will not be created.runs/unperturbed/PE0000/fort.16Hmm I don't see anything in the PE0000 one, maybe it is in another one, grep search PE*/fort.16 for "error" or something like that.
But any case, I think it is likely the problem related to not running aswip on fort.22 and using that instead of the original one.
ghost
commented
3 years ago /scratch2/COASTAL/coastal/save/shared/repositories/adcirc-cg/work/aswiprunning aswip (on the fort.22 downloaded by adcircpy) raises the following error
forrtl: severe (64): input conversion error, unit 22, file /scratch2/COASTAL/coastal/save/shared/working/zach/adcirc/run_20210506_hsofs_120m_subsetflo_besttrack/runs/unperturbed/fort.22
Image PC Routine Line Source
aswip 00000000004EC34E Unknown Unknown Unknown
aswip 000000000051AFF2 Unknown Unknown Unknown
aswip 0000000000495F40 asymmetricvortexp 180 aswip.F
aswip 00000000004920FE MAIN__ 2878 aswip.F
aswip 000000000040309E Unknown Unknown Unknown
libc-2.17.so 00007F2E40AD9555 __libc_start_main Unknown Unknown
aswip 0000000000402FA9 Unknown Unknown UnknownRun this command?:
./aswip -n 20 -m 4 -z 2
WPringle
commented
3 years ago Try again after removing the lines near bottom of file with "EX" in them. (Maybe it doesn't work for the hurricane when it is an EXtratropical cyclone)
ghost
commented
3 years ago Try again after removing the lines near bottom of file with "EX" in them. (Maybe it doesn't work for the hurricane when it is an EXtratropical cyclone)
I can't find ex in the file anywhere:
grep ex -iF fort.22Run this command?:
./aswip -n 20 -m 4 -z 2
This resulted in the same error, unfortunately. I will build aswip again from scratch, to see if that fixes it. Thanks.
WPringle
commented
3 years ago can you also try deleting the first line? (that has LO in it). I don't seem to have that in my Sandy fort.22
ghost
commented
3 years ago I removed the line with LO but it has the same error:
(coupledmodeldriver) Zachary.Burnett@hfe05 /scratch2/COASTAL/coastal/save/shared/working/zach/adcirc/run_20210507_hsofs_120m_subsetflo_besttrack/spinup
➜ /scratch2/COASTAL/coastal/save/shared/repositories/adcirc-cg/work/aswipforrtl: severe (64): input conversion error, unit 22, file /scratch2/COASTAL/coastal/save/shared/working/zach/adcirc/run_20210507_hsofs_120m_subsetflo_besttrack/spinup/fort.22
Image PC Routine Line Source
aswip 00000000004EC34E Unknown Unknown Unknown
aswip 000000000051AFF2 Unknown Unknown Unknown
aswip 0000000000495F40 asymmetricvortexp 180 aswip.F
aswip 00000000004920FE MAIN__ 2878 aswip.F
aswip 000000000040309E Unknown Unknown Unknown
libc-2.17.so 00007FF1AE521555 __libc_start_main Unknown Unknown
aswip 0000000000402FA9 Unknown Unknown Unknownaswip does work on the original.22 for Florence2018
(coupledmodeldriver) Zachary.Burnett@hfe05 /scratch2/COASTAL/coastal/save/shared/models/forcings/besttrack/aswip_test
➜ /scratch2/COASTAL/coastal/save/shared/repositories/adcirc-cg/work/aswip Finished processing ient = 3 iquadrot = 1
Finished processing ient = 2 iquadrot = 1
Finished processing ient = 1 iquadrot = 1
Finished processing ient = 6 iquadrot = 1
Finished processing ient = 5 iquadrot = 1
Finished processing ient = 4 iquadrot = 1
Finished processing ient = 9 iquadrot = 1
Finished processing ient = 8 iquadrot = 1
Finished processing ient = 7 iquadrot = 1
Finished processing ient = 12 iquadrot = 1
Finished processing ient = 11 iquadrot = 1
Finished processing ient = 10 iquadrot = 1
Finished processing ient = 15 iquadrot = 1
Finished processing ient = 14 iquadrot = 1
Finished processing ient = 13 iquadrot = 1
Finished processing ient = 18 iquadrot = 1
Finished processing ient = 17 iquadrot = 1
Finished processing ient = 16 iquadrot = 1
Finished processing ient = 21 iquadrot = 1
Finished processing ient = 20 iquadrot = 1
Finished processing ient = 19 iquadrot = 1
Finished processing ient = 24 iquadrot = 1
Finished processing ient = 23 iquadrot = 1
Finished processing ient = 22 iquadrot = 1
Finished processing ient = 27 iquadrot = 1
Finished processing ient = 26 iquadrot = 1
Finished processing ient = 25 iquadrot = 1
Finished processing ient = 30 iquadrot = 1
Finished processing ient = 29 iquadrot = 1
Finished processing ient = 28 iquadrot = 1
Finished processing ient = 33 iquadrot = 1
Finished processing ient = 32 iquadrot = 1
Finished processing ient = 31 iquadrot = 1
Finished processing ient = 36 iquadrot = 1
Finished processing ient = 35 iquadrot = 1
Finished processing ient = 34 iquadrot = 1
Finished processing ient = 39 iquadrot = 1
Finished processing ient = 38 iquadrot = 1
Finished processing ient = 37 iquadrot = 1
Finished processing ient = 42 iquadrot = 1
Finished processing ient = 41 iquadrot = 1
Finished processing ient = 40 iquadrot = 1
Finished processing ient = 45 iquadrot = 1
Finished processing ient = 44 iquadrot = 1
Finished processing ient = 43 iquadrot = 1
Finished processing ient = 48 iquadrot = 2
Finished processing ient = 47 iquadrot = 1
Finished processing ient = 46 iquadrot = 1
Finished processing ient = 50 iquadrot = 1
Finished processing ient = 49 iquadrot = 1
Finished processing ient = 52 iquadrot = 2
Finished processing ient = 51 iquadrot = 1
Finished processing ient = 54 iquadrot = 3
Finished processing ient = 53 iquadrot = 1
Finished processing ient = 56 iquadrot = 2
Finished processing ient = 55 iquadrot = 1
Finished processing ient = 57 iquadrot = 1
Finished processing ient = 58 iquadrot = 4
Finished processing ient = 59 iquadrot = 2
Finished processing ient = 60 iquadrot = 2
Finished processing ient = 61 iquadrot = 2
Finished processing ient = 62 iquadrot = 2I will investigate the differences between these two fort.22
ghost
commented
3 years ago I've found the problem; it is the space after the storm number.
< AL, 06,2018091106, , BEST, 0, 260N, 632W, 115, 950, HU, 34, NEQ, 130, 130, 90, 140, 1010, 200, 15, , , , , ,290, 14, FLORENCE , 1
---
> AL, 06, 2018091106, , BEST, 0, 260N, 632W, 115, 950, HU, 34, NEQ, 130, 130, 90, 140, 1010, 200, 15, , , , , ,290, 14, FLORENCE , 1,when I add the space back in, aswip works again.
WPringle
commented
3 years ago Weird, was that in one of the modified fort.22s? Wonder why that got changed
ghost
commented
3 years ago I fixed the problem in https://github.com/JaimeCalzadaNOAA/adcircpy/commit/c2879e04e74d28cd5d7acc0be83101871876384e, it looks like I introduced the bug in the fort.22 generation code
when running an unperturbed BestTrack run at
/scratch2/COASTAL/coastal/save/shared/working/zach/adcirc/run_20210505_hsofs_120m_subsetflo_besttrack, the hotstart fails with the following error: