What is the expected output? What do you see instead?
1.Using transverters and the K3 at frequencies above 9,999 Mhz, yes above 9.999
Ghz. Some of us use PSDR IF and the K3 in the microwave region.
2.Attempting to select operating frequencies above the current limit causes SDR
to momentarily display the correct frequency (but the K3 does not) and then the
K3 and PSDR IF displays the previous displayed operation frequency.
3. The K3 operates normally at 10Ghz when I select the band with the K3
instead. PSDR IF displays correctly (10,368.100 for example), but
attempts to CHANGE OPERATION FREQ of the K3 FROM PSDR IF fail.
4. (actual operation freq of the K3 is at 28Mhz)
What version of the product are you using? On what operating system?
PSDR IF v1.19.3.5
Windows XP Home edition Version 2002 Service Pack 3
Please provide any additional information below.
PSDR and the Flex series radios do not have this problem. Transverters for
frequencies well above 30Ghz are supported.
Original issue reported on code.google.com by bill...@gmail.com on 1 Mar 2011 at 7:15
Original issue reported on code.google.com by
bill...@gmail.comon 1 Mar 2011 at 7:15