search

noisymime / speeduino

Speeduino - Arduino based engine management
http://speeduino.com
GNU General Public License v2.0
1.31k stars 526 forks source link

errors while compiling #7

Closed TheJamm closed 9 years ago

TheJamm commented 9 years ago

Hi im getting the error messages bellow while trying to upload/compile not sure what to do, a bit of help would be appreciated

corrections:146: error: 'PID' does not name a type corrections.ino: In function 'byte correctionsAFRClosedLoop()': corrections:189: error: 'egoPID' was not declared in this scope display.ino: At global scope: display:6: error: 'Adafruit_SSD1306' does not name a type display.ino: In function 'void initialiseDisplay()': display:13: error: 'display' was not declared in this scope display:26: error: 'display' was not declared in this scope display:26: error: 'SSD1306_SWITCHCAPVCC' was not declared in this scope display:29: error: 'WHITE' was not declared in this scope display.ino: In function 'void updateDisplay()': display:38: error: 'display' was not declared in this scope

noisymime commented 9 years ago

Did you copy the libraries folders across? Step one here: http://speeduino.com/wiki/index.php/Compiling_and_Installing_Firmware#Compiling_the_firmware

TheJamm commented 9 years ago

Thanks Thats sorted it. now i just need to make a board and try it on an engine, what input sensors do you recomend?

noisymime commented 9 years ago

Take a look through here for the sensors: http://speeduino.com/wiki/index.php/Hardware_requirements

The most important is probably the crank sensor and missing tooth trigger arrangement. After that you either need a MAP sensor or a TPS for load control.

As far as boards go, the v0.3 is now available for purchase if you're interested: https://speeduino.com/shop/index.php?id_product=8&controller=product