Open GoogleCodeExporter opened 9 years ago
happened to me when installed mplayer from repository before compiling modified
one.
fixed it by:
-removing mplayer (sudo apt-get remove mplayer)
-compiling modified mplayer(./configure && make && sudo make install)
-copying binary to /usr/bin/mplayer (sudo cp mplayer /usr/bin/)
Original comment by pavelpol...@gmail.com
on 30 Mar 2010 at 9:46
it`s not my case.
i always compile mplayer from recent svn source .
Original comment by kuh...@gmail.com
on 30 Mar 2010 at 10:04
I removed the line about the registercodec. taht doesn't belong here.
you've already installed coreavc in Wine and verified it works as per the
DshowserveInstall page?
Original comment by alannis...@gmail.com
on 13 Apr 2010 at 4:23
my dshowserver works.
$ dshowserver -c CoreAVCDecoder.ax
Starting wine dshowserver.exe.so
err:process:__wine_kernel_init boot event wait timed out
err:service:RPC_Init RpcServerUseProtseq failed with error 1703
err:wineboot:start_services_process Unexpected termination of services.exe -
exit
code 1703
No id specified, assuming test mode
Using default width for CoreAVCDecoder.ax: 1280
Using default height for CoreAVCDecoder.ax: 720
Using default fourcc for CoreAVCDecoder.ax: 0x34363248
Using default outfmt for CoreAVCDecoder.ax: 0x30323449
Using default outbit for CoreAVCDecoder.ax: 12
Using default GUID for CoreAVCDecoder.ax: 09571a4b-f1fe-4c60-9760de6d310c7c31
Opening device (port is 0)
fixme:vxd:__wine_vxd_open Unknown/unsupported VxD L"ntice.vxd". Try setting
Windows
version to 'nt40' or 'win31'.
len: 992
ProductVersion: 2.0.0
ALSA lib pcm_dmix.c:949:(snd_pcm_dmix_open) The dmix plugin supports only
playback
stream
Decoder supports the following YUV formats: YUY2 UYVY YV12 I420
Decoder is capable of YUV output (flags 0x2b)
Setting fmt
Starting
Initialization is complete
Original comment by kuh...@gmail.com
on 13 Apr 2010 at 4:37
try removing your .mplayer/config file. It is possible there is something
there
causing this issue.
Also try running:
dshowserver --codec CoreAVCDecoder.ax --size 1024x576 --guid 09571a4b-f1fe-4c60-
9760de6d310c7c31 -fourc 0x31637661 --bits 12 --outfmt 0x32315659
and make sure that works ok. I don't see anything in your logs that would
explain
why this isn't working.
What version of Wine are you using? I've never seen either that fixme or those
'err:' lines before, and that "Try setting Windows version to 'nt40' or
'win31'"
looks fishy. I don't get those either.
It looks like dshowserver is aborting pretty early when using mplayer, I don't
see
any indication that CoreAVC is trying to start. I assume that you haven't
manipulated WINEPREFIX?
Original comment by alannis...@gmail.com
on 13 Apr 2010 at 5:04
$ wine --version
wine-1.1.38
ignore that 'err:' lines or fixme warn.
regardless of that warnigs, wine works well.
in my ~/.mplayer/config there is not any special.
/home/gagemel/.mplayer/config
[default]
#General setup
ao=alsa:device=hw=0.0
mixer-channel="Master"
srate=48000
#really-quiet="1" #Very very little console output
vo="xv" #video out
zoom="1" #Allow sofware scaling if I use x11 for vo
aid="1" #audio channel
sid="0" #subtitle set
#Display
double="yes" #double buffering(recommended for subtitles)
monitoraspect="4:3" #I'm on a widescreen laptop so keeps 4:3 content from
#stretching
framedrop="0" # For slow machines
hardframedrop="0" #Make sure hard frame drop is off but can turn on easily #now
framedrop=yes
#cache = 8192
#subtitle code
#Truetype fonts rock! (sudo apt-get msttcorefonts)
#font=/usr/share/fonts/truetype/msttcorefonts/impact.ttf
font=/usr/share/fonts/baekmuk/gulim.ttf ## 다운받은 폰트의 경로를,
subcp=euckr
#ffactor="10" #black outline
sub-bg-alpha="0" #background color ala closed captions
sub-bg-color="0" #black to white
subfont-text-scale="3.7" #truetype font scaling
#subfont-blur="1" #Slight blur
#This sets the postprocessing into overdrive using all possible spare cpu
#cycles to
make the movie look better
autoq=100
vf=pp=de,hqdn3d
vf-add=screenshot
subpos="90" #By default subtitles are too low
subalign="2"
#always keep mplayer on top
ontop="1"
#turns off xscreen saver...maybe
stop-xscreensaver="yes"
#Some extra stuff I am currently not using....
#Fix A/V sync problems on files with bad MP3 VBR audio
#mc="1"
#autosync="10"
#delay="0.5"
prefer-ipv4=yes
[gnome-mplayer]
vo=xv
ao=alsa
alang=Korean,kor,ko
slang=Korean,kor,ko
msglevel=all=5
vf=eq2
#vop=eq=bright:50
#-vf=eq=40:40
subfont-autoscale=1
subfont-outline=3
ffactor=1.5
Original comment by kuh...@gmail.com
on 13 Apr 2010 at 5:17
did you try the dshowserver command I mentioned? Did you try removing your
.config
file? It wasn't clear from your response. I am at a complete loss as to why
it
isn't working, so I'm grasping at straws here.
you do have dshowserver in your path and are running mplayer as the same user
you use
for testing dshowserver, right?
I'm still not convinced those wine errors are innocuous. They could be
confusing the
system call.
You might try setting WINEPREFIX to a non-existant dir and reinstalling the
codec and
running mplayer like that. Maybe something in your wine configuration is
confusing
it. Also, are you uperhaps using a non-english CLANG? Again, I really don't
known
what is going on, so I'm just throwing ideas out there.
Original comment by alannis...@gmail.com
on 14 Apr 2010 at 4:31
what i have tried is:
1. remove ~/.config
2. of course run as same user
3. WINEPREFIX=/bad-non-existant mplayer -vc coreserve test.mkv
4. LANG=C mplayer -vc coreserve test.mkv
5. clean reinstall mplayer amd dshowserver.
but still same error.
those wine errors didn`t cause any problems my ie6 or ultraedit or idapro
Original comment by kuh...@gmail.com
on 14 Apr 2010 at 11:26
6. run dshowserver command you mentioned.
but still same error.
Original comment by kuh...@gmail.com
on 14 Apr 2010 at 11:27
sorry for my typing error.
1. remove ~/.mplayer/config
Original comment by kuh...@gmail.com
on 14 Apr 2010 at 11:35
on
(6) dshowserver command you mentioned
did it say 'initialization is complete'?
you said 'same error' which doesn't tell me which way it went.
Original comment by alannis...@gmail.com
on 14 Apr 2010 at 12:54
[/media/sdc1/mplayer-clean]$ dshowserver --codec CoreAVCDecoder.ax --size
1024x576 --guid 09571a4b-f1fe-4c60-9760de6d310c7c31 -fourc 0x31637661 --
bits 12 --outfmt 0x32315659
Starting wine dshowserver.exe.so
err:service:RPC_Init RpcServerUseProtseq failed with error 1703
err:wineboot:start_services_process Unexpected termination of services.exe -
exit
code 1703
No id specified, assuming test mode
Using default fourcc for CoreAVCDecoder.ax: 0x34363248
Opening device (port is 0)
fixme:vxd:__wine_vxd_open Unknown/unsupported VxD L"ntice.vxd". Try setting
Windows version to 'nt40' or 'win31'.
len: 992
ProductVersion: 2.0.0
ALSA lib pcm_dmix.c:949:(snd_pcm_dmix_open) The dmix plugin supports only
playback stream
Decoder supports the following YUV formats: YUY2 UYVY YV12 I420
Decoder is capable of YUV output (flags 0x2b)
Setting fmt
Starting
Initialization is complete
Original comment by kuh...@gmail.com
on 14 Apr 2010 at 1:40
what OS platform are you running?
can you modify vd_dshowserver.c to replace:
printf("DirectShow filter failed");
with
printf("DirectShow filter failed: %d\n",ret );
and see what value it returns?
Additionally, you can try in the same file:
//ds_mpi->sem = timed_seminit(DS_SOCKET, &port, 1);
ds_mpi->sem = timed_seminit(DS_SEMAPHORE, id, 1);
But I doubt that will help.
Original comment by alannis...@gmail.com
on 14 Apr 2010 at 3:25
1. whenever i recompile mplayer from recent svn, same error occurred on mkv
file. but
dshowserver command you mentioned can fix problems. ok that` it.
2.on mp4 file, i had another problems.
dshowserver works.sound ok but black screen only.
[/media/sdc1/mplayer-clean]$ ./mplayer -vc coreserve ../chung-assist.mp4
MPlayer SVN-r31037-4.3.3 (C) 2000-2010 MPlayer Team
150 audio & 338 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing ../chung-assist.mp4.
libavformat file format detected.
[lavf] Video stream found, -vid 0
[lavf] Audio stream found, -aid 1
VIDEO: [H264] 384x288 24bpp 24.971 fps 491.7 kbps (60.0 kbyte/s)
Clip info:
major_brand: isom
minor_version: 512
compatible_brands: isomiso2avc1mp41
title: chung-assist.mp4
author: Avidemux
encoder: Lavf52.52.0
Opening video filter: [screenshot]
Opening video filter: [hqdn3d]
Opening video filter: [pp=de]
==========================================================================
Forced video codec: coreserve
Opening video decoder: [dshowserver] DirectShowServer video codecs
[PP] Using external postprocessing filter, max q = 6.
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
[swscaler @ 0x8fbe900]using unscaled yuv420p -> rgb24 special converter
VO: [xv] 384x288 => 384x288 Planar YV12 [zoom]
dshowserver --codec CoreAVCDecoder.ax --size 384x288 --guid 09571a4b-f1fe-4c60-
9760de6d310c7c31 --fourc 0x34363248 --bits 12 --outfmt 0x32315659 --pid 29172
--id
b43a3970 --numpages 10 --port 0 &
Starting wine dshowserver.exe.so
err:service:RPC_Init RpcServerUseProtseq failed with error 1703
err:wineboot:start_services_process Unexpected termination of services.exe -
exit
code 1703
Opening device (port is 0)
fixme:vxd:__wine_vxd_open Unknown/unsupported VxD L"ntice.vxd". Try setting
Windows
version to 'nt40' or 'win31'.
len: 992
ProductVersion: 2.0.0
ALSA lib pcm_dmix.c:949:(snd_pcm_dmix_open) The dmix plugin supports only
playback
stream
Decoder supports the following YUV formats: YUY2 UYVY YV12 I420
Decoder is capable of YUV output (flags 0x2b)
Setting fmt
Starting
Initialization is complete
Using semaphore based mutex
Found DirectShow filterSelected video codec: [coreserve] vfm: dshowserver
(CoreAVC
DShow H264 decoder x.x for x86 - http://corecodec.org/)
==========================================================================
[PP] Using external postprocessing filter, max q = 6.
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
Dshowserver Connected to host
AUDIO: 22050 Hz, 2 ch, s16le, 128.0 kbit/18.14% (ratio: 16000->88200)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
Original comment by kuh...@gmail.com
on 14 Apr 2010 at 3:50
my os id ubuntu 8.10
Original comment by kuh...@gmail.com
on 14 Apr 2010 at 3:59
with mp4 try different muxers. lavc and mov are good ones to try. The black
screen
generally means that the quantize matrix or other AVC heareds weren't supplied
to the
codec and it can't decode any frames. If changing demuxers doesn't help,
you're
likely stuck.
The fact that the sockets don't work is troubling. I can't think of any reason
that
you wouldn't be able to communicate through sockets.
Original comment by alannis...@gmail.com
on 14 Apr 2010 at 7:44
Original issue reported on code.google.com by
kuh...@gmail.com
on 18 Mar 2010 at 5:07