Closed elliotf closed 1 year ago
I can't help, but thank you so much for adding this board.
On Sat, Jan 28, 2023, 20:44 Elliot Foster @.***> wrote:
Hello again, nice people/person!
Since Raspberry Pis are so hard to come by these days, I've picked up an Orange Pi Zero 2, and I've added it as a PCB.
There are a few issues with it, though, mostly centered around the vertical USB A socket:
- The dimensions of the socket are off from what is in NopSCADlib, and (unlike the microsd socket) there is no way to alter the dimensions.
- Related, I started adding an ability to override the dimensions via a proof-of-concept "usb_vAx1" vertical USB A socket that I do not much care for, so thought it would be good to get some feedback before I proceed further.
- The socket does not have any 90 degree flanges. I can turn off some of the flanges, but not all.
Thank you in advance for any guidance you might have, and thank you again for this library!
You can view, comment on, or merge this pull request online at:
https://github.com/nophead/NopSCADlib/pull/250 Commit Summary
- de05134 https://github.com/nophead/NopSCADlib/pull/250/commits/de051343d01e57b5e0c43a5f8de69eb508bd86ca WiP of an Orange Pi Zero 2 PCB
File Changes
(2 files https://github.com/nophead/NopSCADlib/pull/250/files)
- M vitamins/pcb.scad https://github.com/nophead/NopSCADlib/pull/250/files#diff-d19fbed22e8d1af8b128a2713322d33c472dc90de808912863065b439f63157d (12)
- M vitamins/pcbs.scad https://github.com/nophead/NopSCADlib/pull/250/files#diff-8291564e5cd20ee6b42275b37068537e9798f3d3cd9517d0e9a3f01b63376679 (22)
Patch Links:
- https://github.com/nophead/NopSCADlib/pull/250.patch
- https://github.com/nophead/NopSCADlib/pull/250.diff
— Reply to this email directly, view it on GitHub https://github.com/nophead/NopSCADlib/pull/250, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAA4OWMEGP75AOOMKNMGPATWUVZILANCNFSM6AAAAAAUJZ3R7M . You are receiving this because you are subscribed to this thread.Message ID: @.***>
I have made the flanges removable and fixed the tongue position, just the overall dimensions to sort out. As a sanity check, what is the wall thickness of the connector?
The thickness of the metal is ~0.3mm if that's what you're asking.
Yes that makes sense. It is thinner than the original.
Hello again, nice people/person!
Since Raspberry Pis are so hard to come by these days, I've picked up an Orange Pi Zero 2, and I've added it as a PCB.
There are a few issues with it, though, mostly centered around the vertical USB A socket:
Thank you in advance for any guidance you might have, and thank you again for this library!