Closed markvdb closed 7 years ago
Noted. We are working on building instructions that can take better feedback.
I recommend drilling it to make it work with an m5 screw.
On August 21, 2014 5:22:17 PM EEST, Mark Van den Borre notifications@github.com wrote:
The 23 link cable carrier (MHPUS102-19-23-S) holes are 4mm. This is too small for the BCB5-6 bolts indicated in the beta build instructions, cad model and BOM.
I checked misumi. They don't seem to have hntpz5-4 t-slot nuts (with lock), only hntp5-4 ones without lock. I'm not experienced enough to know if either drilling or hntp5-4 will work best for this application. In any case, some additional documentation is needed. I would gladly update this myself, but I don't know where I could. I have no better place to mention this than a github issue :-(
Reply to this email directly or view it on GitHub: https://github.com/nortd/lasersaur/issues/3
Stefan Hechenberger work: Nortd Labs - labs.nortd.com project: Lasersaur - www.lasersaur.com
This is a bug in the y carrier belt assembly. The holes on both sides of the 23 link cable carrier (MHPUS102-19-23-S) are 4mm. This is too small for the BCB5-6 bolts indicated in the beta build instructions, cad model and BOM.
I checked misumi. They don't seem to have hntpz5-4 t-slot nuts (with lock), only hntp5-4 ones without lock. I'm not experienced enough to know if either drilling or hntp5-4 will work best for this application.
In any case, some additional documentation is needed. I would gladly update this myself, but I don't know where I could. I have no better place to mention this than a github issue :-(