Uploads are shown as Status: Downloading

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Have one host download WUs and upload results.
2. Connect with AndroBOINC to that host and switch to the transfers view.
3. All transfers are shown as being downloaded as status in their detail views.

What is the expected output? What do you see instead?
Download details for downloading files/WUs, upload details for uploading 
files/results. ;)

What version of the product are you using?
v6.10.58rc1 from PlayStore, but I can not remember when this glitch did first 
occur, sorry!

What is the vendor/model of the device? What is the Android version?
HTC Desire GSM with LeeDroid GB 3.3.3R5 Data++, thus Android 2.3.3

Please provide any additional information below.
Thank you for this great piece of software and your hard work and support on 
it! :)
Sorry, my second "complaint" in a short time. :/

Original issue reported on code.google.com by hitchhik...@gmail.com on 7 Sep 2012 at 10:31

[GoogleCodeExporter]

It does not reproduce for me. I can see various states, like 
Download/Upload/Download Pending/Upload Pending in transfer detail dialog. But 
for me the transfers are finished quite fast when project server is reachable 
and transfers are allowed in client. And transfers do not occur very often for 
my projects, so it is not easy to catch such situation...

Please specify additional details:
- What is the refresh rate you use?
- Has your client networking enabled?
- Is the project server reachable? Were there some previous transfer errors?
- What is approximate progress of upload when you observe this?
- Isn't it possible, that upload just finished when selecting its details and 
then the details are in fact shown for next transfer, which is download? (It 
may sound silly, but this actually happened to me when I was checking this 
issue - and I just discovered my confusion only from the screenshots that I 
took.)

Well, while I was checking this, at least I have found another minor bug 
related to transfer details display; the project backoff value is incorrect.

Original comment by pavol.michalec@gmail.com on 7 Sep 2012 at 3:46

• Changed state: Queried
• Added labels: Component-UI

[GoogleCodeExporter]

First of all, it does and did occur for me on projects using GPUs with uploads 
and downloads both quite big such as POEM@home or GpuGrid (for the latter I was 
not entirely sure I had seen it so I waited, but I did see it today again with 
POEM). So yes, I am quite sure.

Additional details:
- Refresh rate: every second over WiFi; I do not use mobile internet for this 
yet.
- Networking is and has always been enabled.
- Project servers today all are reachable. Yesterday and the day before the 
Deutsche Telekom obviously had some problems in their networks, but those 
vanished after I installed the latest firmware on the SpeedPort router manually.
- Approximately 60 KB/s upload and 125 to 150 KB/s download; with 16 transfers 
at most per host and four at most per project, as my internet connection 
finally has become very reliable and a lot faster after I had a Telekom 
technician here two months ago.
- No, as the uploads are quite big (around 1MB for POEM and dozens of MB for 
GpuGrid), I am quite sure that I selected the uploaded file's details and not 
accidentally selected a following download from the same project, if that is 
what you mean.

I COULD try uninstalling and installing AndroBOINC again, but then the data and 
thus my six hosts' details/credentials could be gone, could they not? Well, I 
might try using TitaniumBackup to backup the data and restore it again 
afterwards. Umm, I will get back at you...

Original comment by hitchhik...@gmail.com on 8 Sep 2012 at 9:37

[GoogleCodeExporter]

So, I just uninstalled AndroBOINC, cleared cache and dalvik-cache in recovery, 
rebooted twice and installed it again from PlayStore (v6.10.58.rc1) and 
restored its data via TitaniumBackup. 
POEM result upload just showed again as being downloaded, just like the 
following download from POEM.

Original comment by hitchhik...@gmail.com on 8 Sep 2012 at 10:19

[GoogleCodeExporter]

I was finally able to reproduce this issue:

- It happens only with client 7.0.28 for me (most of my machines are with 
6.10.17 or 6.10.58, I have only one 7.0.28 reachable by AndroBOINC)
- The same behaviour (as with AndroBOINC) I can see also with stock (desktop) 
BOINC Manager 6.10.58 when connecting to 7.0.28 client (i.e AndroBOINC 
6.10.58.rc1 shows it the same way as BOINC Manager 6.10.58)

The root cause is that client 7.0.x sends slightly different data than clients 
6.10.x (the slightly cryptic tag "generated_locally" has been replaced by more 
descriptive "is_upload") and the managers of 6.10.x or older cannot correctly 
display it.

It is quite easy to fix this compatibility issue in AndroBOINC...

Original comment by pavol.michalec@gmail.com on 8 Sep 2012 at 11:55

• Changed state: Accepted
• Added labels: Compatibility, Milestone-Rel_6.10.58

[GoogleCodeExporter]

Oops, sorry, now I see I had forgotten to specify that major detail! "Glad" you 
could figure it out and it is quite easily fixed! Thx again!

Original comment by hitchhik...@gmail.com on 8 Sep 2012 at 1:02

[GoogleCodeExporter]

This issue was closed by revision r60.

Original comment by pavol.michalec@gmail.com on 8 Sep 2012 at 3:29

• Changed state: Fixed

[GoogleCodeExporter]

Verified on published v6.10.58.rc2

Original comment by pavol.michalec@gmail.com on 9 Sep 2012 at 4:11

• Changed state: Verified