Get port forwarding to work to the set port.

ntadmin / DGND3700v2

Custom firmware for the Netgear DGND3700v2

12 stars 4 forks source link

Get port forwarding to work to the set port. #3

Closed ntadmin closed 8 years ago

ntadmin commented 8 years ago

The destination IP on the internal network is now set with a port.

Is this sufficient?
Or do we need to break into the actual setting up of port forwards (using iptables at a guess)

ntadmin commented 8 years ago

Not sure what the router call to trigger changes in NAT forwarding, so uanble to break in as yet. Tried to hand force it to see using method at http://www.systutorials.com/816/port-forwarding-using-iptables/ but no joy.

ntadmin commented 8 years ago

Trying new tack: putting a miniupnp client on the router and then use that to talk to the upnp fort forwarding that is already in the firmware. Assuming that works, would be wise to update that to the latest version of miniupnpd as well. (that update possibly NEWTB3 though)

ntadmin commented 8 years ago

upnpc client from miniupnp now working, various wrapper scripts seem to work, just trying to get it to trigger correctly from the web pages and at start up ...

ntadmin commented 8 years ago

start stop script (/usr/sbin/manage_user_nat) works, as does /usr/sbin/rc_app/rc_user_nat.

Next challenge is to get these correctly integrated into start up sequence and changes from the web pages.

ntadmin commented 8 years ago

Start up now works. Changes on the web pages a bit problematic.

ntadmin commented 8 years ago

Seems good.