search

ntadmin / DGND3700v2

Custom firmware for the Netgear DGND3700v2
12 stars 4 forks source link

USB mount system doesn't put devices into approved list. #51

Open ntadmin opened 6 years ago

ntadmin commented 6 years ago

The device is mounted and shared but isn't listed in the approval section of Advanced > USB settings

ntadmin commented 6 years ago

@vezza - I think I know what the issue is here, but it will take a bit of work. I'm pretty much in solid meetings from now until the end of Saturday and then I'm on the road for six days, but I will get onto it over time.

ntadmin commented 6 years ago

@vezza - there's also the background issue that the system I have been using to build the firmware is no longer supported by the distribution as it is so old, and this may slow things down. It's also worth noting that, in the longer run, this will make it increasingly hard to maintain the firmware.

vezza commented 6 years ago

@ntadmin - I never tried to build the firmware miself but I'm interested in it... what distribution is needed to build it?

ntadmin commented 6 years ago

@vezza good question. You have to set up a machine (or a virtual one) running a 32 but version of Linux. I'll look out some links for you.

On 16 Sep 2017, at 16:54, vezza notifications@github.com wrote:

@ntadmin - I never tried to build the firmware miself but I'm interested in it... what distribution is needed to build it?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or mute the thread.

ntadmin commented 6 years ago

@vezza I think that the post https://community.netgear.com/t5/DSL-Modems-Routers/Customising-the-firmware-for-the-DGND3700v2/m-p/1074375#M9863 has links in it to how to get things going. I think my other posts on hay forum also make most things clear.

Happy to answer questions as you give it a go, I'm on the road until next weekend, I'll help if possible.

Ideally we need to make it so that the firmware can be compiled on an modern Linux distribution :-)

On 16 Sep 2017, at 16:54, vezza notifications@github.com wrote:

@ntadmin - I never tried to build the firmware miself but I'm interested in it... what distribution is needed to build it?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or mute the thread.