search

nullEuro / apply-equalizer

python programm that activates or deactivates pulseaudio-equalizer based on output port (headphones or speakers)
MIT License
11 stars 1 forks source link

Fail at start with "cannot look up address!" #8

Open sgourichon opened 10 years ago

sgourichon commented 10 years ago

Symptom:

./apply-equalizer.py

load dbus-module into PA
27
cannot look up address!
cannot look up address!
cannot look up address!
cannot look up address!
cannot look up address!
cannot look up address!

Goes on forever, about one line per second. Ctrl-C does not kill process. Manual kill with PID quits. Running process again -> same failure. pulseaudio -k then running again -> works

./apply-equalizer.py

load dbus-module into PA
17
Got pa-server address from dbus: unix:path=/run/user/1000/pulse/dbus-socket
Disabling persistence...
Current operation: saving configuration (disable-config)
-------------------------------------
Equalizer setting saved (disable-config).
-------------------------------------
Disabling...
PulseAudio Equalizer/LADSPA Processor 2.7 (05/02/2010)
-------------------------------------
Current operation: disabling equalizer
-------------------------------------
Unloading & reloading stream-restore module...
Unloading module-ladspa-sink...
Moving active PulseAudio clients to ALSA sink (alsa_output.pci-0000_00_1b.0.analog-stereo)...
Transferring current mute (0) & volume (45%) to ALSA sink (alsa_output.pci-0000_00_1b.0.analog-stereo)...
-------------------------------------
Equalizer status: [disabled]
Equalizer configuration status: [disabled]
-------------------------------------
connected to pulseaudio
nullEuro commented 10 years ago

Weird. I am not able to reproduce this. Ideas?

sgourichon commented 9 years ago

It still appears from time to time (say, once a month). Ubuntu 14.04.

FelixLeo commented 8 years ago

Hi All,

now I do have the same issue and it is not going away, everything worked fine on initial setup all sym. links were created and worked correctly 2 days ago i had a X crash on LMDE1 Cinnamon and then I just started receiving black screen with only mouse cursor with no sound so as I had such case before I knew that it was some config file corrupted on my profile so I deleted all config files which would be regenerated including the .config/pulse and .config/apply-equlizer folder and etc. Cinnamon is back but since than apply-equlizer doesn't work. Pulse audio recreated its files as well i did also re-activate pulse-equlizer and did apply settings and tick mark EQ Enabled and Keep Settings. Sound via Equalizer works but apply-equlizer doesn't.

logfile is similar starts with a single line for about 2-3 minutes and than fills it in with the error message: mint@mint:~$ sudo more /tmp/apply-equalizer_mint.log

23 module-dbus-protocol cannot look up address! cannot look up address! cannot look up address!

mint@mint:~$ sudo more /var/log/messages | grep -e pulse*

Mar 2 14:22:41 localhost pulseaudio[5504]: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11 Mar 2 14:22:41 localhost pulseaudio[5504]: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11

I also did kill -the the pulseaudio and as well apply-equlizer than start pulseaudio and than apply-equlizer . The symlinks didnt regenerate only the empty folder is there.

Mar 2 14:22:41 localhost pulseaudio[5504]: [pulseaudio] server-lookup.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11 Mar 2 14:22:41 localhost pulseaudio[5504]: [pulseaudio] main.c: Unable to contact D-Bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11 Mar 2 14:22:41 localhost pulseaudio[5531]: [pulseaudio] pid.c: Daemon already running. Mar 2 14:22:41 localhost pulseaudio[5533]: [pulseaudio] pid.c: Daemon already running. Mar 2 14:22:42 localhost pulseaudio[5544]: [pulseaudio] pid.c: Daemon already running. Mar 2 14:22:42 localhost pulseaudio[5550]: [pulseaudio] pid.c: Daemon already running. Mar 2 14:22:42 localhost pulseaudio[5555]: [pulseaudio] pid.c: Daemon already running. Mar 2 14:25:09 localhost rtkit-daemon[5506]: Successfully made thread 7370 of process 7370 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11. Mar 2 14:25:09 localhost pulseaudio[7370]: [pulseaudio] pid.c: Daemon already running. Mar 2 14:30:27 localhost rtkit-daemon[5506]: Successfully made thread 8923 of process 8923 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11. Mar 2 14:30:27 localhost pulseaudio[8923]: [pulseaudio] pid.c: Daemon already running. Mar 2 14:32:21 localhost pulseaudio[5504]: [pulseaudio] module.c: Module "module-stream-restore" should be loaded once at most. Refusing to load. Mar 2 14:48:03 localhost pulseaudio[5504]: [pulseaudio] module.c: Module "module-stream-restore" should be loaded once at most. Refusing to load. Mar 2 14:49:03 localhost pulseaudio[5504]: [pulseaudio] module.c: Module "module-stream-restore" should be loaded once at most. Refusing to load. Mar 2 14:49:54 localhost pulseaudio[5504]: [pulseaudio] module.c: Module "module-stream-restore" should be loaded once at most. Refusing to load. Mar 2 14:49:55 localhost pulseaudio[5504]: [pulseaudio] module.c: Module "module-stream-restore" should be loaded once at most. Refusing to load. Mar 2 14:50:35 localhost pulseaudio[5504]: [pulseaudio] module.c: Module "module-stream-restore" should be loaded once at most. Refusing to load. Mar 2 14:50:37 localhost pulseaudio[5504]: [pulseaudio] module.c: Module "module-stream-restore" should be loaded once at most. Refusing to load. Mar 2 14:53:43 localhost pulseaudio[5504]: [pulseaudio] module.c: Module "module-dbus-protocol" should be loaded once at most. Refusing to load. Mar 2 14:56:16 localhost pulseaudio[5504]: [pulseaudio] module.c: Module "module-dbus-protocol" should be loaded once at most. Refusing to load. Mar 2 15:03:27 localhost rtkit-daemon[5506]: Successfully made thread 19332 of process 19332 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11. Mar 2 15:03:27 localhost rtkit-daemon[5506]: Successfully made thread 19333 of process 19332 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5. Mar 2 15:03:27 localhost rtkit-daemon[5506]: Successfully made thread 19334 of process 19332 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5. Mar 2 15:04:08 localhost rtkit-daemon[5506]: Successfully made thread 19516 of process 19516 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11. Mar 2 15:04:08 localhost pulseaudio[19516]: [pulseaudio] pid.c: Daemon already running. Mar 2 15:04:36 localhost pulseaudio[19332]: [pulseaudio] module.c: Module "module-stream-restore" should be loaded once at most. Refusing to load.

pactl output:

Module #0 Name: module-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "4.0"

Module #2 Name: module-card-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "4.0"

Module #3 Name: module-augment-properties Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "4.0"

Module #4 Name: module-switch-on-port-available Argument: Usage counter: n/a Properties:

Module #5 Name: module-alsa-card Argument: device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1" Usage counter: 1 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "4.0"

Module #6 Name: module-udev-detect Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "4.0"

Module #7 Name: module-bluetooth-policy Argument: Usage counter: n/a Properties: module.author = "Frédéric Dalleau" module.description = "When a bluetooth sink or source is added, load module-loopback" module.version = "4.0"

Module #8 Name: module-bluetooth-discover Argument: Usage counter: n/a Properties: module.author = "Joao Paulo Rechi Vita" module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers" module.version = "4.0"

Module #9 Name: module-esound-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "ESOUND protocol (UNIX sockets)" module.version = "4.0"

Module #10 Name: module-native-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "4.0"

Module #11 Name: module-gconf Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "GConf Adapter" module.version = "4.0"

Module #12 Name: module-default-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "4.0"

Module #13 Name: module-rescue-streams Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move their streams to the default sink/source" module.version = "4.0"

Module #14 Name: module-always-sink Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Always keeps at least one sink loaded even if it's a null one" module.version = "4.0"

Module #15 Name: module-intended-roles Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based of intended roles of devices" module.version = "4.0"

Module #16 Name: module-suspend-on-idle Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "4.0"

Module #17 Name: module-console-kit Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each ConsoleKit session of this user" module.version = "4.0"

Module #18 Name: module-systemd-login Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "4.0"

Module #19 Name: module-position-event-sounds Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "4.0"

Module #20 Name: module-role-cork Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Mute & cork streams with certain roles while others exist" module.version = "4.0"

Module #21 Name: module-filter-heuristics Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "4.0"

Module #22 Name: module-filter-apply Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "4.0"

Module #23 Name: module-dbus-protocol Argument: Usage counter: n/a Properties: module.author = "Tanu Kaskinen" module.description = "D-Bus interface" module.version = "4.0"

Module #28 Name: module-cli-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Command line interface protocol (UNIX sockets)" module.version = "4.0"

Module #29 Name: module-x11-publish Argument: display=:0 Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "X11 credential publisher" module.version = "4.0"

Module #30 Name: module-x11-cork-request Argument: display=:0 Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Synthesize X11 media key events when cork/uncork is requested" module.version = "4.0"

Module #31 Name: module-x11-xsmp Argument: display=:0 session_manager=local/mint:@/tmp/.ICE-unix/8827,unix/mint:/tmp/.ICE-unix/8827 Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "X11 session management" module.version = "4.0"

Module #43 Name: module-ladspa-sink Argument: sink_name=ladspa_output.mbeq_1197.mbeq master=alsa_output.pci-0000_00_1b.0.analog-stereo plugin=mbeq_1197 label=mbeq control=3.2,2.8,0.8,0.9,0.0,-2.4,-4.8,1.5,0.0,1.1,3.0,3.0,5.8,7.8,7.8 Usage counter: 1 Properties:

Sink #0 State: RUNNING Name: alsa_output.pci-0000_00_1b.0.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 5 Mute: no Volume: 0: 38% 1: 38% 0: -25.21 dB 1: -25.21 dB balance 0.00 Base Volume: 100% 0.00 dB Monitor Source: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor Latency: 74686 usec, configured 74988 usec Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC268 Analog" alsa.id = "ALC268 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xdbb00000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "284b" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC268" alsa.components = "HDA:10ec0268,1025011e,00100003 HDA:14f12c06,1025011e,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: analog-output-speaker: Speakers (priority: 10000) analog-output-headphones: Headphones (priority: 9000, not available) Active Port: analog-output-speaker Formats: pcm

Sink #7 State: RUNNING Name: ladspa_output.mbeq_1197.mbeq Description: LADSPA Plugin Multiband EQ on Built-in Audio Analog Stereo Driver: module-ladspa-sink.c Sample Specification: float32le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 43 Mute: no Volume: 0: 38% 1: 38% balance 0.00 Base Volume: 100% Monitor Source: ladspa_output.mbeq_1197.mbeq.monitor Latency: 74567 usec, configured 74988 usec Flags: HW_MUTE_CTRL LATENCY Properties: device.master_device = "alsa_output.pci-0000_00_1b.0.analog-stereo" device.class = "filter" device.ladspa.module = "mbeq_1197" device.ladspa.label = "mbeq" device.ladspa.name = "Multiband EQ" device.ladspa.maker = "Steve Harris steve@plugin.org.uk" device.ladspa.copyright = "GPL" device.ladspa.unique_id = "1197" device.description = "LADSPA Plugin Multiband EQ on Built-in Audio Analog Stereo" device.icon_name = "audio-card" Formats: pcm

Source #0 State: IDLE Name: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor Description: Monitor of Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 5 Mute: no Volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00 Base Volume: 100% 0.00 dB Monitor of Sink: alsa_output.pci-0000_00_1b.0.analog-stereo Latency: 0 usec, configured 371519 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Built-in Audio Analog Stereo" device.class = "monitor" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xdbb00000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "284b" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "0" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formats: pcm

Source #1 State: SUSPENDED Name: alsa_input.pci-0000_00_1b.0.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 5 Mute: no Volume: 0: 20% 1: 20% 0: -42.50 dB 1: -42.50 dB balance 0.00 Base Volume: 7% -70.00 dB Monitor of Sink: n/a Latency: 0 usec, configured 0 usec Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC268 Analog" alsa.id = "ALC268 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xdbb00000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "284b" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC268" alsa.components = "HDA:10ec0268,1025011e,00100003 HDA:14f12c06,1025011e,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: analog-input-microphone-internal: Internal Microphone (priority: 8900) analog-input-microphone: Microphone (priority: 8700, not available) analog-input-linein: Line In (priority: 8100, not available) Active Port: analog-input-microphone-internal Formats: pcm

Source #8 State: IDLE Name: ladspa_output.mbeq_1197.mbeq.monitor Description: Monitor of LADSPA Plugin Multiband EQ on Built-in Audio Analog Stereo Driver: module-ladspa-sink.c Sample Specification: float32le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 43 Mute: no Volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00 Base Volume: 100% 0.00 dB Monitor of Sink: ladspa_output.mbeq_1197.mbeq Latency: 0 usec, configured 371519 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of LADSPA Plugin Multiband EQ on Built-in Audio Analog Stereo" device.class = "monitor" device.icon_name = "audio-input-microphone" Formats: pcm

Sink Input #7 Driver: protocol-native.c Owner Module: 10 Client: 58 Sink: 7 Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\"" Corked: no Mute: no Volume: 0: 38% 1: 38% 0: -25.21 dB 1: -25.21 dB balance 0.00 Buffer Latency: 273537 usec Sink Latency: 73211 usec Resample method: copy Properties: media.name = "ALSA Playback" application.name = "ALSA plug-in [mocp]" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "5465" application.process.user = "mint" application.process.host = "mint" application.process.binary = "mocp" application.language = "en_US.utf8" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c1" module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [mocp]"

Sink Input #16 Driver: module-ladspa-sink.c Owner Module: 43 Client: n/a Sink: 0 Sample Specification: float32le 2ch 44100Hz Channel Map: front-left,front-right Format: pcm, format.sample_format = "\"float32le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\"" Corked: no Mute: no Volume: 0: 38% 1: 38% 0: -25.21 dB 1: -25.21 dB balance 0.00 Buffer Latency: 0 usec Sink Latency: 73151 usec Resample method: copy Properties: media.name = "LADSPA Stream" media.role = "filter" module-stream-restore.id = "sink-input-by-media-role:filter"

Client #0 Driver: module-systemd-login.c Owner Module: 18 Properties: application.name = "Login Session c6" systemd-login.session = "c6"

Client #1 Driver: module-systemd-login.c Owner Module: 18 Properties: application.name = "Login Session c5" systemd-login.session = "c5"

Client #2 Driver: module-systemd-login.c Owner Module: 18 Properties: application.name = "Login Session c4" systemd-login.session = "c4"

Client #3 Driver: module-systemd-login.c Owner Module: 18 Properties: application.name = "Login Session c3" systemd-login.session = "c3"

Client #4 Driver: module-systemd-login.c Owner Module: 18 Properties: application.name = "Login Session c2" systemd-login.session = "c2"

Client #5 Driver: module-systemd-login.c Owner Module: 18 Properties: application.name = "Login Session c1" systemd-login.session = "c1"

Client #12 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "ALSA plug-in [mocp]" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "5466" application.process.user = "mint" application.process.host = "mint" application.process.binary = "mocp" application.language = "en_US.utf8" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c2"

Client #13 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "ALSA plug-in [mocp]" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "5463" application.process.user = "mint" application.process.host = "mint" application.process.binary = "mocp" application.language = "en_US.utf8" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c5"

Client #14 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "ALSA plug-in [mocp]" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "5462" application.process.user = "mint" application.process.host = "mint" application.process.binary = "mocp" application.language = "en_US.utf8" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c4"

Client #15 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "ALSA plug-in [mocp]" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "5465" application.process.user = "mint" application.process.host = "mint" application.process.binary = "mocp" application.language = "en_US.utf8" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c1"

Client #16 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "ALSA plug-in [mocp]" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "5467" application.process.user = "mint" application.process.host = "mint" application.process.binary = "mocp" application.language = "en_US.utf8" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c3"

Client #17 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "ALSA plug-in [mocp]" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "5464" application.process.user = "mint" application.process.host = "mint" application.process.binary = "mocp" application.language = "en_US.utf8" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c6"

Client #44 Driver: module-systemd-login.c Owner Module: 18 Properties: application.name = "Login Session c8" systemd-login.session = "c8"

Client #48 Driver: module-x11-xsmp.c Owner Module: 31 Properties: application.name = "XSMP Session on cinnamon-session as 1083f4f42cab0c27ce145692542760327900000088270034" xsmp.vendor = "cinnamon-session" xsmp.client.id = "1083f4f42cab0c27ce145692542760327900000088270034"

Client #50 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "Cinnamon Volume Control Media Keys" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.VolumeControl" application.icon_name = "multimedia-volume-control" application.version = "2.0.10" application.process.id = "8921" application.process.user = "mint" application.process.host = "mint" application.process.binary = "cinnamon-settings-daemon" application.language = "en_US.utf8" window.x11.display = ":0" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c8"

Client #51 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "libcanberra" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.version = "0.30" application.id = "org.freedesktop.libcanberra" application.process.id = "8921" application.process.user = "mint" application.process.host = "mint" application.process.binary = "cinnamon-settings-daemon" application.language = "en_US.utf8" window.x11.display = ":0" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c8"

Client #52 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "Cinnamon" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.Cinnamon" application.process.id = "8966" application.process.user = "mint" application.process.host = "mint" application.process.binary = "cinnamon" application.language = "en_US.utf8" window.x11.display = ":0" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c8"

Client #57 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "Cinnamon Volume Control" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.id = "org.gnome.VolumeControl" application.icon_name = "multimedia-volume-control" application.version = "2.0.14" application.process.id = "8966" application.process.user = "mint" application.process.host = "mint" application.process.binary = "cinnamon" application.language = "en_US.utf8" window.x11.display = ":0" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c8"

Client #58 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "ALSA plug-in [mocp]" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "5465" application.process.user = "mint" application.process.host = "mint" application.process.binary = "mocp" application.language = "en_US.utf8" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c1"

Client #252 Driver: protocol-native.c Owner Module: 10 Properties: application.name = "pactl" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "18236" application.process.user = "mint" application.process.host = "mint" application.process.binary = "pactl" application.language = "en_US.utf8" window.x11.display = ":0" application.process.machine_id = "d93df4cadd6afd146d77e86b530f79ce" application.process.session_id = "c8"

Card #0 Name: alsa_card.pci-0000_00_1b.0 Driver: module-alsa-card.c Owner Module: 5 Properties: alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xdbb00000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "284b" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "0" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority. 60) output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority. 6000) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority. 6060) output:iec958-stereo: Digital Stereo (IEC958) Output (sinks: 1, sources: 0, priority. 5500) output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (sinks: 1, sources: 1, priority. 5560) off: Off (sinks: 0, sources: 0, priority. 0) Active Profile: output:analog-stereo+input:analog-stereo Ports: analog-input-microphone-internal: Internal Microphone (priority: 8900, latency offset: 0 usec) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo analog-input-microphone: Microphone (priority: 8700, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo analog-input-linein: Line In (priority: 8100, latency offset: 0 usec, not available) Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo, output:iec958-stereo+input:analog-stereo analog-output-speaker: Speakers (priority: 10000, latency offset: 0 usec) Properties: device.icon_name = "audio-speakers" Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-headphones" Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo iec958-stereo-output: Digital Output (S/PDIF) (priority: 0, latency offset: 0 usec) Part of profile(s): output:iec958-stereo, output:iec958-stereo+input:analog-stereo

I hope you will be able to pinpoint what could be wrong.

Thanks in advance.

FelixLeo commented 8 years ago

I also just did notice in the background of the X I do have another error message which is only there interestingly that /org/pulseaudio/core1 doesn't exist

nullEuro commented 8 years ago

Hmm, do you run apply-equalizer and pulseaudio as the same user? Also I think you should not use "Keep settings" because this will create a new virtual output device and breaks on port changes (should not be related to the error you get though).

sgourichon commented 8 years ago

Happens also on Ubuntu 16.04 . Same workaround pulseaudio -k works. apply-equalizer and pulseaudio aways run as the same user. Not using "keep settings".