search

nunhes / breeze

Intro Laravel+Breeze
0 stars 1 forks source link

Update dependency sass to v1.77.6 #22

Open renovate[bot] opened 2 years ago

renovate[bot] commented 2 years ago

Mend Renovate

This PR contains the following updates:

Package Change Age Adoption Passing Confidence
sass 1.52.1 -> 1.77.6 age adoption passing confidence

Release Notes

sass/dart-sass (sass) ### [`v1.77.6`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1776) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.77.5...1.77.6) - Fix a few cases where comments and occasionally even whitespace wasn't allowed between the end of Sass statements and the following semicolon. ### [`v1.77.5`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1775) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.77.4...1.77.5) - Fully trim redundant selectors generated by `@extend`. ### [`v1.77.4`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1774) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.77.3...1.77.4) ##### Embedded Sass - Support passing `Version` input for `fatalDeprecations` as string over embedded protocol. - Fix a bug in the JS Embedded Host where `Version` could be incorrectly accepted as input for `silenceDeprecations` and `futureDeprecations` in pure JS. ### [`v1.77.3`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1773) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.77.2...1.77.3) ##### Dart API - `Deprecation.duplicateVariableFlags` has been deprecated and replaced with `Deprecation.duplicateVarFlags` to make it consistent with the `duplicate-var-flags` name used on the command line and in the JS API. ### [`v1.77.2`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1772) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.77.1...1.77.2) - Don't emit deprecation warnings for functions and mixins beginning with `__`. - Allow user-defined functions whose names begin with `_` and otherwise look like vendor-prefixed functions with special CSS syntax. ##### Command-Line Interface - Properly handle the `--silence-deprecation` flag. - Handle the `--fatal-deprecation` and `--future-deprecation` flags for `--interactive` mode. ### [`v1.77.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1771) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.77.0...1.77.1) - Fix a crash that could come up with importers in certain contexts. ### [`v1.77.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1770) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.76.0...1.77.0) - *Don't* throw errors for at-rules in keyframe blocks. ### [`v1.76.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1760) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.75.0...1.76.0) - Throw errors for misplaced statements in keyframe blocks. - Mixins and functions whose names begin with `--` are now deprecated for forwards-compatibility with the in-progress CSS functions and mixins spec. This deprecation is named `css-function-mixin`. ### [`v1.75.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1750) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.74.1...1.75.0) - Fix a bug in which stylesheet canonicalization could be cached incorrectly when custom importers or the Node.js package importer made decisions based on the URL of the containing stylesheet. ##### JS API - Allow `importer` to be passed without `url` in `StringOptionsWithImporter`. ### [`v1.74.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1741) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.72.0...1.74.1) - No user-visible changes. ### [`v1.72.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1720) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.71.1...1.72.0) - Support adjacent `/`s without whitespace in between when parsing plain CSS expressions. - Allow the Node.js `pkg:` importer to load Sass stylesheets for `package.json` `exports` field entries without extensions. - When printing suggestions for variables, use underscores in variable names when the original usage used underscores. ##### JavaScript API - Properly resolve `pkg:` imports with the Node.js package importer when arguments are passed to the JavaScript process. ### [`v1.71.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1711) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.71.0...1.71.1) ##### Command-Line Interface - Ship the musl Linux release with the proper Dart executable. ##### JavaScript API - Export the `NodePackageImporter` class in ESM mode. - Allow `NodePackageImporter` to locate a default directory even when the entrypoint is an ESM module. ##### Dart API - Make passing a null argument to `NodePackageImporter()` a static error rather than just a runtime error. ##### Embedded Sass - In the JS Embedded Host, properly install the musl Linux embedded compiler when running on musl Linux. ### [`v1.71.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1710) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.70.0...1.71.0) For more information about `pkg:` importers, see [the announcement][pkg-importers] on the Sass blog. [pkg-importers]: https://sass-lang.com/blog/announcing-pkg-importers ##### Command-Line Interface - Add a `--pkg-importer` flag to enable built-in `pkg:` importers. Currently this only supports the Node.js package resolution algorithm, via `--pkg-importer=node`. For example, `@use "pkg:bootstrap"` will load `node_modules/bootstrap/scss/bootstrap.scss`. ##### JavaScript API - Add a `NodePackageImporter` importer that can be passed to the `importers` option. This loads files using the `pkg:` URL scheme according to the Node.js package resolution algorithm. For example, `@use "pkg:bootstrap"` will load `node_modules/bootstrap/scss/bootstrap.scss`. The constructor takes a single optional argument, which indicates the base directory to use when locating `node_modules` directories. It defaults to `path.dirname(require.main.filename)`. ##### Dart API - Add a `NodePackageImporter` importer that can be passed to the `importers` option. This loads files using the `pkg:` URL scheme according to the Node.js package resolution algorithm. For example, `@use "pkg:bootstrap"` will load `node_modules/bootstrap/scss/bootstrap.scss`. The constructor takes a single argument, which indicates the base directory to use when locating `node_modules` directories. ### [`v1.70.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1700) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.69.7...1.70.0) ##### JavaScript API - Add a `sass.initCompiler()` function that returns a `sass.Compiler` object which supports `compile()` and `compileString()` methods with the same API as the global Sass object. On the Node.js embedded host, each `sass.Compiler` object uses a single long-lived subprocess, making compiling multiple stylesheets much more efficient. - Add a `sass.initAsyncCompiler()` function that returns a `sass.AsyncCompiler` object which supports `compileAsync()` and `compileStringAsync()` methods with the same API as the global Sass object. On the Node.js embedded host, each `sass.AsynCompiler` object uses a single long-lived subprocess, making compiling multiple stylesheets much more efficient. ##### Embedded Sass - Support the `CompileRequest.silent` field. This allows compilations with no logging to avoid unnecessary request/response cycles. - The Dart Sass embedded compiler now reports its name as "dart-sass" rather than "Dart Sass", to match the JS API's `info` field. ### [`v1.69.7`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1697) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.69.6...1.69.7) ##### Embedded Sass - In the JS Embedded Host, properly install the x64 Dart Sass executable on ARM64 Windows. ### [`v1.69.6`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1696) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.69.5...1.69.6) - Produce better output for numbers with complex units in `meta.inspect()` and debugging messages. - Escape U+007F DELETE when serializing strings. - When generating CSS error messages to display in-browser, escape all code points that aren't in the US-ASCII region. Previously only code points U+0100 LATIN CAPITAL LETTER A WITH MACRON were escaped. - Provide official releases for musl LibC and for Android. - Don't crash when running `meta.apply()` in asynchronous mode. ##### JS API - Fix a bug where certain exceptions could produce `SourceSpan`s that didn't follow the documented `SourceSpan` API. ### [`v1.69.5`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1695) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.69.4...1.69.5) ##### JS API - Compatibility with Node.js 21.0.0. ### [`v1.69.4`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1694) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.69.3...1.69.4) - No user-visible changes. ### [`v1.69.3`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1693) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.69.2...1.69.3) ##### Embedded Sass - Fix TypeScript type locations in `package.json`. ### [`v1.69.2`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1692) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.69.1...1.69.2) ##### JS API - Fix a bug where Sass crashed when running in the browser if there was a global variable named `process`. ### [`v1.69.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1691) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.69.0...1.69.1) - No user-visible changes. ### [`v1.69.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1690) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.68.0...1.69.0) - Add a `meta.get-mixin()` function that returns a mixin as a first-class Sass value. - Add a `meta.apply()` mixin that includes a mixin value. - Add a `meta.module-mixins()` function which returns a map from mixin names in a module to the first-class mixins that belong to those names. - Add a `meta.accepts-content()` function which returns whether or not a mixin value can take a content block. - Add support for the relative color syntax from CSS Color 5. This syntax cannot be used to create Sass color values. It is always emitted as-is in the CSS output. ##### Dart API - Deprecate `Deprecation.calcInterp` since it was never actually emitted as a deprecation. ##### Embedded Sass - Fix a rare race condition where the embedded compiler could freeze when a protocol error was immediately followed by another request. ### [`v1.68.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1680) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.67.0...1.68.0) - Fix the source spans associated with the `abs-percent` deprecation. ##### JS API - Non-filesystem importers can now set the `nonCanonicalScheme` field, which declares that one or more URL schemes (without `:`) will never be used for URLs returned by the `canonicalize()` method. - Add a `containingUrl` field to the `canonicalize()` and `findFileUrl()` methods of importers, which is set to the canonical URL of the stylesheet that contains the current load. For filesystem importers, this is always set; for other importers, it's set only if the current load has no URL scheme, or if its URL scheme is declared as non-canonical by the importer. ##### Dart API - Add `AsyncImporter.isNonCanonicalScheme`, which importers (async or sync) can use to indicate that a certain URL scheme will never be used for URLs returned by the `canonicalize()` method. - Add `AsyncImporter.containingUrl`, which is set during calls to the `canonicalize()` method to the canonical URL of the stylesheet that contains the current load. This is set only if the current load has no URL scheme, or if its URL scheme is declared as non-canonical by the importer. ##### Embedded Sass - The `CalculationValue.interpolation` field is deprecated and will be removed in a future version. It will no longer be set by the compiler, and if the host sets it it will be treated as equivalent to `CalculationValue.string` except that `"("` and `")"` will be added to the beginning and end of the string values. - Properly include TypeScript types in the `sass-embedded` package. ### [`v1.67.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1670) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.66.1...1.67.0) - All functions defined in CSS Values and Units 4 are now once again parsed as calculation objects: `round()`, `mod()`, `rem()`, `sin()`, `cos()`, `tan()`, `asin()`, `acos()`, `atan()`, `atan2()`, `pow()`, `sqrt()`, `hypot()`, `log()`, `exp()`, `abs()`, and `sign()`. Unlike in 1.65.0, function calls are *not* locked into being parsed as calculations or plain Sass functions at parse-time. This means that user-defined functions will take precedence over CSS calculations of the same name. Although the function names `calc()` and `clamp()` are still forbidden, users may continue to freely define functions whose names overlap with other CSS calculations (including `abs()`, `min()`, `max()`, and `round()` whose names overlap with global Sass functions). - **Breaking change**: As a consequence of the change in calculation parsing described above, calculation functions containing interpolation are now parsed more strictly than before. However, *almost* all interpolations that would have produced valid CSS will continue to work. The only exception is `#{$variable}%` which is not valid in Sass and is no longer valid in calculations. Instead of this, either use `$variable` directly and ensure it already has the `%` unit, or write `($variable * 1%)`. - **Potentially breaking bug fix**: The importer used to load a given file is no longer used to load absolute URLs that appear in that file. This was unintented behavior that contradicted the Sass specification. Absolute URLs will now correctly be loaded only from the global importer list. This applies to the modern JS API, the Dart API, and the embedded protocol. ##### Embedded Sass - Substantially improve the embedded compiler's performance when compiling many files or files that require many importer or function call round-trips with the embedded host. ### [`v1.66.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1661) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.66.0...1.66.1) ##### JS API - Fix a bug where Sass compilation could crash in strict mode if passed a callback that threw a string, boolean, number, symbol, or bignum. ### [`v1.66.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1660) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.65.1...1.66.0) - **Breaking change:** Drop support for the additional CSS calculations defined in CSS Values and Units 4. Custom Sass functions whose names overlapped with these new CSS functions were being parsed as CSS calculations instead, causing an unintentional breaking change outside our normal \[compatibility policy] for CSS compatibility changes. Support will be added again in a future version, but only after Sass has emitted a deprecation warning for all functions that will break for at least three months prior to the breakage. ### [`v1.65.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1651) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.65.0...1.65.1) - Update abs-percent deprecatedIn version to `1.65.0`. ### [`v1.65.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1650) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.64.2...1.65.0) - All functions defined in CSS Values and Units 4 are now parsed as calculation objects: `round()`, `mod()`, `rem()`, `sin()`, `cos()`, `tan()`, `asin()`, `acos()`, `atan()`, `atan2()`, `pow()`, `sqrt()`, `hypot()`, `log()`, `exp()`, `abs()`, and `sign()`. - Deprecate explicitly passing the `%` unit to the global `abs()` function. In future releases, this will emit a CSS abs() function to be resolved by the browser. This deprecation is named `abs-percent`. ### [`v1.64.2`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1642) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.64.1...1.64.2) - No user-visible changes. ### [`v1.64.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1641) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.64.0...1.64.1) ##### Embedded Sass - Fix a bug where a valid `SassCalculation.clamp()` with less than 3 arguments would throw an error. ### [`v1.64.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1640) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.63.6...1.64.0) - Comments that appear before or between `@use` and `@forward` rules are now emitted in source order as much as possible, instead of always being emitted after the CSS of all module dependencies. - Fix a bug where an interpolation in a custom property name crashed if the file was loaded by a `@use` nested in an `@import`. ##### JavaScript API - Add a new `SassCalculation` type that represents the calculation objects added in Dart Sass 1.40.0. - Add `Value.assertCalculation()`, which returns the value if it's a `SassCalculation` and throws an error otherwise. - Produce a better error message when an environment that supports some Node.js APIs loads the browser entrypoint but attempts to access the filesystem. ##### Embedded Sass - Fix a bug where nested relative `@imports` failed to load when using the deprecated functions `render` or `renderSync` and those relative imports were loaded multiple times across different files. ### [`v1.63.6`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1636) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.63.5...1.63.6) ##### JavaScript API - Fix `import sass from 'sass'` again after it was broken in the last release. ##### Embedded Sass - Fix the `exports` declaration in `package.json`. ### [`v1.63.5`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1635) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.63.4...1.63.5) ##### JavaScript API - Fix a bug where loading the package through both CJS `require()` and ESM `import` could crash on Node.js. ##### Embedded Sass - Fix a deadlock when running at high concurrency on 32-bit systems. - Fix a race condition where the embedded compiler could deadlock or crash if a compilation ID was reused immediately after the compilation completed. ### [`v1.63.4`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1634) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.63.3...1.63.4) ##### JavaScript API - Re-enable support for `import sass from 'sass'` when loading the package from an ESM module in Node.js. However, this syntax is now deprecated; ESM users should use `import * as sass from 'sass'` instead. On the browser and other ESM-only platforms, only `import * as sass from 'sass'` is supported. - Properly export the legacy API values `TRUE`, `FALSE`, `NULL`, and `types` from the ECMAScript module API. ##### Embedded Sass - Fix a race condition where closing standard input while requests are in-flight could sometimes cause the process to hang rather than shutting down gracefully. - Properly include the root stylesheet's URL in the set of loaded URLs when it fails to parse. ### [`v1.63.3`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1633) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.63.2...1.63.3) ##### JavaScript API - Fix loading Sass as an ECMAScript module on Node.js. ### [`v1.63.2`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1632) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.63.1...1.63.2) - No user-visible changes. ### [`v1.63.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1631) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.63.0...1.63.1) - No user-visible changes. ### [`v1.63.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1630) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.62.1...1.63.0) ##### JavaScript API - Dart Sass's JS API now supports running in the browser. Further details and instructions for use are in [the README](README.md#dart-sass-in-the-browser). ##### Embedded Sass - The Dart Sass embedded compiler is now included as part of the primary Dart Sass distribution, rather than a separate executable. To use the embedded compiler, just run `sass --embedded` from any Sass executable (other than the pure JS executable). The Node.js embedded host will still be distributed as the `sass-embedded` package on npm. The only change is that it will now provide direct access to a `sass` executable with the same CLI as the `sass` package. - The Dart Sass embedded compiler now uses version 2.0.0 of the Sass embedded protocol. See [the spec][embedded-protocol-spec] for a full description of the protocol, and [the changelog][embedded-protocol-changelog] for a summary of changes since version 1.2.0. [embedded-protocol-spec]: https://togithub.com/sass/sass/blob/main/spec/embedded-protocol.md [embedded-protocol-changelog]: https://togithub.com/sass/sass/blob/main/EMBEDDED_PROTOCOL_CHANGELOG.md - The Dart Sass embedded compiler now runs multiple simultaneous compilations in parallel, rather than serially. ### [`v1.62.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1621) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.62.0...1.62.1) - Fix a bug where `:has(+ &)` and related constructs would drop the leading combinator. ### [`v1.62.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1620) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.61.0...1.62.0) - Deprecate the use of multiple `!global` or `!default` flags on the same variable. This deprecation is named `duplicate-var-flags`. - Allow special numbers like `var()` or `calc()` in the global functions: `grayscale()`, `invert()`, `saturate()`, and `opacity()`. These are also native CSS `filter` functions. This is in addition to number values which were already allowed. - Fix a cosmetic bug where an outer rule could be duplicated after nesting was resolved, instead of re-using a shared rule. ### [`v1.61.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1610) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.60.0...1.61.0) - **Potentially breaking change:** Drop support for End-of-Life Node.js 12. - Fix remaining cases for the performance regression introduced in 1.59.0. ##### Embedded Sass - The JS embedded host now loads files from the working directory when using the legacy API. ### [`v1.60.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1600) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.59.3...1.60.0) - Add support for the `pi`, `e`, `infinity`, `-infinity`, and `NaN` constants in calculations. These will be interpreted as the corresponding numbers. - Add support for unknown constants in calculations. These will be interpreted as unquoted strings. - Serialize numbers with value `infinity`, `-infinity`, and `NaN` to `calc()` expressions rather than CSS-invalid identifiers. Numbers with complex units still can't be serialized. ### [`v1.59.3`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1593) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.59.2...1.59.3) - Fix a performance regression introduced in 1.59.0. - The NPM release of 1.59.0 dropped support for Node 12 without actually indicating so in its pubspec. This release temporarily adds back support so that the latest Sass version that declares it supports Node 12 actually does so. However, Node 12 is now end-of-life, so we will drop support for it properly in an upcoming release. ### [`v1.59.2`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1592) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.59.1...1.59.2) - No user-visible changes. ### [`v1.59.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1591) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.59.0...1.59.1) - No user-visible changes. ### [`v1.59.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1590) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.58.3...1.59.0) ##### Command Line Interface - Added a new `--fatal-deprecation` flag that lets you treat a deprecation warning as an error. You can pass an individual deprecation ID (e.g. `slash-div`) or you can pass a Dart Sass version to treat all deprecations initially emitted in that version or earlier as errors. - New `--future-deprecation` flag that lets you opt into warning for use of certain features that will be deprecated in the future. At the moment, the only option is `--future-deprecation=import`, which will emit warnings for Sass `@import` rules, which are not yet deprecated, but will be in the future. ##### Dart API - New `Deprecation` enum, which contains the different current and future deprecations used by the new CLI flags. - The `compile` methods now take in `fatalDeprecations` and `futureDeprecations` parameters, which work similarly to the CLI flags. ### [`v1.58.3`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1583) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.58.2...1.58.3) - No user-visible changes. ### [`v1.58.2`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1582) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.58.1...1.58.2) ##### Command Line Interface - Add a timestamp to messages printed in `--watch` mode. - Print better `calc()`-based suggestions for `/`-as-division expression that contain calculation-incompatible constructs like unary minus. ### [`v1.58.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1581) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.58.0...1.58.1) - Emit a unitless hue when serializing `hsl()` colors. The `deg` unit is incompatible with IE, and while that officially falls outside our compatibility policy, it's better to lean towards greater compatibility. ### [`v1.58.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1580) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.57.1...1.58.0) - Remove sourcemap comments from Sass sources. The generated sourcemap comment for the compiled CSS output remains unaffected. - Fix a bug in `@extend` logic where certain selectors with three or more combinators were incorrectly considered superselectors of similar selectors with fewer combinators, causing them to be incorrectly trimmed from the output. - Produce a better error message for a number with a leading `+` or `-`, a decimal point, but no digits. - Produce a better error message for a nested property whose name starts with `--`. - Fix a crash when a selector ends in an escaped backslash. - Add the relative length units from CSS Values 4 and CSS Contain 3 as known units to validate bad computation in `calc`. ##### Command Line Interface - The `--watch` flag will now track loads through calls to `meta.load-css()` as long as their URLs are literal strings without any interpolation. ### [`v1.57.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1571) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.57.0...1.57.1) - No user-visible changes. ### [`v1.57.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1570) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.56.2...1.57.0) - Add a `split($string, $separator, $limit: null)` function to `sass:string` that splits a string into separate substrings based on a separator string. ##### JavaScript API - **Potentially breaking bug fix**: Custom functions in both the modern and legacy API now properly reject signatures with whitespace between the function name and parentheses. - Custom functions in the legacy API now allow signatures with whitespace before the function name, to match a bug in Node Sass. ##### Dart API - **Potentially breaking bug fix**: `Callable.fromSignature()` and `AsyncCallable.fromSignature()` now reject signatures with whitespace between the function name and parentheses. ### [`v1.56.2`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1562) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.56.1...1.56.2) ##### Embedded Sass - The embedded compiler now supports version 1.2.0 of [the embedded protocol](https://togithub.com/sass/embedded-protocol). ### [`v1.56.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1561) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.56.0...1.56.1) ##### Embedded Sass - Importer results now validate that `contents` is actually a string and whether `sourceMapUrl` is an absolute URL. ### [`v1.56.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1560) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.55.0...1.56.0) - **Potentially breaking change:** To match the CSS spec, SassScript expressions beginning with `not` or `(` are no longer supported at the beginning of parenthesized sections of media queries. For example, ```scss @​media (width >= 500px) and (not (grid)) ``` will now be emitted unchanged, instead of producing ```scss @​media (width >= 500px) and (false) ``` See [the Sass website](https://sass-lang.com/d/media-logic) for details. - **Potentially breaking bug fix:** Angle units like `rad` or `turn` are now properly converted to equivalent `deg` values for `hsl()`, `hsla()`, `adjust-hue()`, `color.adjust()`, and `color.change()`. See [the Sass website](https://sass-lang.com/d/function-units#hue) for details. - Fix indentation for selectors that span multiple lines in a `@media` query. - Emit a deprecation warning when passing `$alpha` values with units to `color.adjust()` or `color.change()`. This will be an error in Dart Sass 2.0.0. See [the Sass website](https://sass-lang.com/d/function-units#alpha) for details. - Emit a deprecation warning when passing a `$weight` value with no units or with units other than `%` to `color.mix()`. This will be an error in Dart Sass 2.0.0. See [the Sass website](https://sass-lang.com/d/function-units#weight) for details. - Emit a deprecation warning when passing `$n` values with units to `list.nth()` or `list.set-nth()`. This will be an error in Dart Sass 2.0.0. See [the Sass website](https://sass-lang.com/d/function-units#index) for details. - Improve existing deprecation warnings to wrap `/`-as-division suggestions in `calc()` expressions. - Properly mark the warning for passing numbers with units to `random()` as a deprecation warning. - Fix a bug where `@extend` could behave unpredicatably when used along with `meta.load-css()` and shared modules that contained no CSS themselves but loaded CSS from other modules. ##### Dart API - Emit a deprecation warning when passing a `sassIndex` with units to `Value.sassIndexToListIndex()`. This will be an error in Dart Sass 2.0.0. ##### JS API - Importer results now validate whether `contents` is actually a string type. - Importer result argument errors are now rendered correctly. ### [`v1.55.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1550) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.9...1.55.0) - **Potentially breaking bug fix:** Sass numbers are now universally stored as 64-bit floating-point numbers, rather than sometimes being stored as integers. This will generally make arithmetic with very large numbers more reliable and more consistent across platforms, but it does mean that numbers between nine quadrillion and nine quintillion will no longer be represented with full accuracy when compiling Sass on the Dart VM. - **Potentially breaking bug fix:** Sass equality is now properly [transitive]. Two numbers are now considered equal (after doing unit conversions) if they round to the same `1e-11`th. Previously, numbers were considered equal if they were within `1e-11` of one another, which led to some circumstances where `$a == $b` and `$b == $c` but `$a != $b`. [transitive]: https://en.wikipedia.org/wiki/Transitive_property - **Potentially breaking bug fix:** Various functions in `sass:math` no longer treat floating-point numbers that are very close (but not identical) to integers as integers. Instead, these functions now follow the floating-point specification exactly. For example, `math.pow(0.000000000001, -1)` now returns `1000000000000` instead of `Infinity`. - Emit a deprecation warning for `$a -$b` and `$a +$b`, since these look like they could be unary operations but they're actually parsed as binary operations. Either explicitly write `$a - $b` or `$a (-$b)`. See https://sass-lang.com/d/strict-unary for more details. ##### Dart API - Add an optional `argumentName` parameter to `SassScriptException()` to make it easier to throw exceptions associated with particular argument names. - Most APIs that previously returned `num` now return `double`. All APIs continue to *accept* `num`, although in Dart 2.0.0 these APIs will be changed to accept only `double`. ##### JS API - Fix a bug in which certain warning spans would not have their properties accessible by the JS API. ### [`v1.54.9`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1549) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.8...1.54.9) - Fix an incorrect span in certain `@media` query deprecation warnings. ### [`v1.54.8`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1548) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.7...1.54.8) - No user-visible changes. ### [`v1.54.7`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1547) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.6...1.54.7) - Add support for 32-bit ARM releases on Linux. ### [`v1.54.6`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1546) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.5...1.54.6) - Fix a bug where a `@media` query could be incorrectly omitted from a stylesheet if it had multiple levels of nested `@media` queries within it *and* the inner queries were mergeable but the outer query was not. ### [`v1.54.5`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1545) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.4...1.54.5) - Properly consider `a ~ c` to be a superselector of `a ~ b ~ c` and `a + b + c`. - Properly consider `b > c` to be a superselector of `a > b > c`, and similarly for other combinators. - Properly calculate specificity for selector pseudoclasses. - Deprecate use of `random()` when `$limit` has units to make it explicit that `random()` currently ignores units. A future version will no longer ignore units. - Don't throw an error when the same module is `@forward`ed multiple times through a configured module. ##### Embedded Sass - Rather than downloading the embedded compiler for the local platform on install, the `sass-embedded` npm package now declares optional dependencies on platform-specific embedded compiler packages. ### [`v1.54.4`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1544) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.3...1.54.4) - Improve error messages when passing incorrect units that are also out-of-bounds to various color functions. ### [`v1.54.3`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1543) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.2...1.54.3) - Release a native ARM64 executable for Mac OS. ### [`v1.54.2`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1542) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.1...1.54.2) - No user-visible changes. ### [`v1.54.1`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1541) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.54.0...1.54.1) - When unifying selectors for `@extend` and `selector.unify()`, ensure that `:root`, `:scope`, `:host`, and `:host-context` only appear at the beginning of complex selectors. ### [`v1.54.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1540) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.53.0...1.54.0) - Deprecate selectors with leading or trailing combinators, or with multiple combinators in a row. If they're included in style rules after nesting is resolved, Sass will now produce a deprecation warning and, in most cases, omit the selector. Leading and trailing combinators can still be freely used for nesting purposes. See https://sass-lang.com/d/bogus-combinators for more details. - Add partial support for new media query syntax from Media Queries Level 4. The only exception are logical operations nested within parentheses, as these were previously interpreted differently as SassScript expressions. A parenthesized media condition that begins with `not` or an opening parenthesis now produces a deprecation warning. In a future release, these will be interpreted as plain CSS instead. - Deprecate passing non-`deg` units to `color.hwb()`'s `$hue` argument. - Fix a number of bugs when determining whether selectors with pseudo-elements are superselectors. - Treat `*` as a superselector of all selectors. ##### Dart API - Add a top-level `fakeFromImport()` function for testing custom importers that use `AsyncImporter.fromImport`. ##### JS API - Add a `charset` option that controls whether or not Sass emits a `@charset`/BOM for non-ASCII stylesheets. - Fix Sass npm package types for TS 4.7+ Node16 and NodeNext module resolution. ### [`v1.53.0`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1530) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.52.3...1.53.0) - Add support for calling `var()` with an empty second argument, such as `var(--side, )`. ##### JS API - Fix a bug where `meta.load-css()` would sometimes resolve relative URLs incorrectly when called from a mixin using the legacy JS API. ##### Embedded Sass - Respect npm's proxy settings when downloading the embedded Sass compiler. ### [`v1.52.3`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1523) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.52.2...1.52.3) - Fix crash when trailing loud comments (`/* ... */`) appear twice in a row across two different imports which themselves imported the same file each. ### [`v1.52.2`](https://togithub.com/sass/dart-sass/blob/HEAD/CHANGELOG.md#1522) [Compare Source](https://togithub.com/sass/dart-sass/compare/1.52.1...1.52.2) - Preserve location of trailing loud comments (`/* ... */`) instead of pushing the comment to the next line.

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

This PR has been generated by Mend Renovate. View repository job log here.