Open SammyTheSnake opened 2 years ago
Great! Join, the discord: https://discord.gg/9HSMNYxPAM
And yes, photos would be super helpful!
Cool. I've just set my printer off on a printing spree and I'm heading to bed, but I'll see what I can do in the morning :-D
OK, so the printer has more screws than a prison, so it'll take me a little longer to dismantle it enough to get good pictures of the main PCB, but I can see it well enough to know that it's note quite the same as the one at https://github.com/nviennot/reversing-mono4k/tree/main/pcb.
Writing on the CPU: GD32F307 VET6 CK5GTL JJ2034 GigaDevice ARM
Numbers on the large "ANLOGIC" chip: EF2L45LG144B 52013114420335
I'll update here when I've managed to get the board separated enough for a good flat photo.
I am also interested in a release for the mono SE here are the pictures, let me know if any help or debugging is needed.... i am not very professional software wise but i am pretty good in the hardware side
I have the SE and I'm interested in helping you support my printer!
Unfortunately, it's clear to me that your chops are somewhat in advance of my own, so my ability to help is a little limited, but I can provide photos of my circuit board and might be able to rig up a dump of the ROM and various tests, so please let me know what is most helpful (especially if it's relatively easy to do!)
I used to be a software engineer, but I've not had experience working with embedded hardware except for a little perfunctory tinkering.