Closed thundergreen closed 4 years ago
I don't have Home Assistant, and the screen you have seen is Node-Red. The UI is very similar to HA. But I think it could be done. HA also works with any device over MQTT. So you should be able to integrated it. I am not sure about the xiaomi part though.
Ok..sounds good .. I'll give it a shot and you're right ..I'm also running some stuff on nodered for home-assistant. Which model is it exactly for the thermostat?
Thanks a lot for your answer and I'll revert to you asap
nygma2004 notifications@github.com schrieb am Do., 7. Nov. 2019, 08:58:
I don't have Home Assistant, and the screen you have seen is Node-Red. The UI is very similar to HA. But I think it could be done. HA also works with any device over MQTT. So you should be able to integrated it. I am not sure about the xiaomi part though.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/nygma2004/beca_mqtt/issues/2?email_source=notifications&email_token=ADFUA77GLXSCGWEUP7AWE7LQSPDDDA5CNFSM4JJYERC2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEDLRMBY#issuecomment-550966791, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADFUA75GPEGRGNLLP3T5FN3QSPDDDANCNFSM4JJYERCQ .
Mine was the 2 pipe version with modbus. But they sell all possible combination. So decide which version you need and just look for the modbus version. I don't think they are selling all combination on Amazon, but you will find all models on http://becaenergy.com/.
Hi Fella. I saw your Youtube-Vdeo and I am amazed and curious if it's possible to add this in Home-Assistant. I thought I did see a screen with Home-Assistant right?
My Idea is to place those Thermostats in each room to control my AC.
My AC are controlled by Xiaomi IR extenders and a custom Component. Now I'd like to somehow fiddle this together. Means. Homeassistant will create the Climate conponent and then i somehow have to bridge those received and sent mqtt topics to control my xiaomi ac custom component. Do you think it's makeable?