issues
search
nzmCoder
/
GarminBinaryTools
Project to communicate with old Garmin GPS receivers using the RS-232 binary protocol.
GNU General Public License v3.0
4
stars
2
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
change gar2rnx and async to build with VS2017
#47
nzmCoder
closed
7 years ago
1
There is a typo in gar2rnx help screen
#46
nzmCoder
closed
7 years ago
1
Put my obfuscated email address in about box
#45
nzmCoder
closed
7 years ago
1
Make other settings sticky
#44
nzmCoder
closed
7 years ago
1
Profile improvements
#43
nzmCoder
opened
7 years ago
0
Decode unit S/N as part of ID response
#42
nzmCoder
opened
7 years ago
1
Warning if start recording at low baud
#41
nzmCoder
closed
7 years ago
2
Add 0.1 to recording time
#40
nzmCoder
closed
7 years ago
1
Add Tool Tips for all buttons
#39
nzmCoder
closed
7 years ago
1
Start Rec Message Box: Add Cancel Button
#38
nzmCoder
closed
7 years ago
1
Change default time to 20.0 minutes
#37
nzmCoder
closed
7 years ago
1
COM port drop-down, display only available port numbers
#36
nzmCoder
closed
7 years ago
1
Build with Visual Studio 2017
#35
nzmCoder
closed
7 years ago
1
Add a status showing SVs seen
#34
nzmCoder
closed
8 years ago
1
Name Rinex files using the minute value format
#33
nzmCoder
closed
8 years ago
1
GAR2RNX, update to Rinex 2.11 standard
#32
nzmCoder
closed
8 years ago
1
GAR2RNX cmd line options in XML file
#31
nzmCoder
closed
8 years ago
1
Show percent utilization of serial port
#30
nzmCoder
closed
8 years ago
1
Decode the EPE value and display of GUI
#29
nzmCoder
closed
8 years ago
1
Spawn a command console, launch gar2rnx, process file to Rinex.
#28
nzmCoder
closed
8 years ago
1
Create a FAQ
#27
nzmCoder
closed
8 years ago
1
Rename PVT vs. POS
#26
nzmCoder
closed
8 years ago
1
Bug: STATE_PVT_ON4
#25
nzmCoder
closed
8 years ago
1
If button Stop G12 is pressed when G12 is not being logged, crash
#24
nzmCoder
closed
8 years ago
2
Add build date/time field to About box
#23
nzmCoder
closed
8 years ago
1
Add button to automatically find GPS com port
#22
nzmCoder
closed
8 years ago
1
Hide all clutter of unused commands and controls in release version
#21
nzmCoder
closed
8 years ago
1
Add a command to turn off GPS
#20
nzmCoder
closed
8 years ago
1
State timer during Async should remain set to 1 sec
#19
nzmCoder
closed
8 years ago
1
Button to spawn GAR2RNX
#18
nzmCoder
closed
8 years ago
1
State machine to perform the steps to create G12 file
#17
nzmCoder
closed
8 years ago
2
Better resync logic after bad packet
#16
nzmCoder
closed
8 years ago
2
Document meaning of bit mapped async bits
#15
nzmCoder
closed
8 years ago
1
Add a waterline feature
#14
nzmCoder
closed
8 years ago
1
Change Async command to enable only 0x36, 0x37, 0x38
#13
nzmCoder
closed
8 years ago
1
Interpret message 0x33, PVT
#12
nzmCoder
closed
8 years ago
1
Ability to change baud up and down, 9600 - 38400 - 9600
#11
nzmCoder
closed
8 years ago
4
Test ASYNC with eTrex
#10
nzmCoder
closed
8 years ago
4
Separate Monitor Mode
#9
nzmCoder
closed
8 years ago
3
Try to debug serial driver
#8
nzmCoder
closed
8 years ago
2
Add commands for requesting clock data and position data.
#7
nzmCoder
closed
8 years ago
1
Capture a short 1 minute G12 file with ASYNC, as "gold" file
#6
nzmCoder
closed
8 years ago
1
Decode Time and Position on screen during logging.
#5
nzmCoder
closed
8 years ago
1
Function to name Rinex file
#4
nzmCoder
closed
8 years ago
0
Function to create name of Rinex file.
#3
nzmCoder
closed
8 years ago
1
Write Bibliography of Articles on PPP related to Garmin.
#2
nzmCoder
closed
8 years ago
1
Read G12 file
#1
nzmCoder
closed
8 years ago
2