search

o-gs / dji-firmware-tools

Tools for handling firmwares of DJI products, with focus on quadcopters.
GNU General Public License v3.0
1.55k stars 421 forks source link

Mavic Mini support for replaced gimbal/camera #164

Open OlafWinkler opened 4 years ago

OlafWinkler commented 4 years ago

Hello, Great tool here, great work! I had to replace my Mavic Mini's gimbal/camera after a crash. I bought a new system from another disassembled Mavic Mini on Ebay and also a new flat ribbon cable with the compass (?) sensor. The drone is okay now and flies and records, but there are still errors 40011 and 40021 reported in the app. Any chance that you can improve this toolset to fix this problem? I have already run GimbalCalib JointCoarse and LinearHall. Each with bad response error, but the drone performed as expected, still errors 40011 and 40021 persist. Thanks for the great work. Best regards, Olaf

kRtUk commented 4 years ago

Exactly the same here mate.

yakaracolombia commented 3 years ago

did you solve this issue? I had the same problem after gimbal+camera replacement in mavic mini

pilgrimage80 commented 3 years ago

Hello, Great tool here, great work! I had to replace my Mavic Mini's gimbal/camera after a crash. I bought a new system from another disassembled Mavic Mini on Ebay and also a new flat ribbon cable with the compass (?) sensor. The drone is okay now and flies and records, but there are still errors 40011 and 40021 reported in the app. Any chance that you can improve this toolset to fix this problem? I have already run GimbalCalib JointCoarse and LinearHall. Each with bad response error, but the drone performed as expected, still errors 40011 and 40021 persist. Thanks for the great work. Best regards, Olaf

Drone gimbal Not Working Did it work even though you gave this error?

There must be some way to get around this error? Before I did this calibration setting it was just giving 40002 error. After calibration error 40011 has been added.

OlafWinkler commented 3 years ago

My Mavic Mini still shows the errors, but the gimbal is working ok. So, basically, no big thing here. But it would be nice to get rid of the error messages. My understanding is that the gimbal needs to be properly introduced to the main board. But that seems to be a complicated programming mechanism which is probably held secret by DJI in order to encourage customers to use DJI service centers (or to buy other drones next time).

nettunoroberto commented 3 years ago

removing the error 40011 is easily solved, while for the error 40021 it is necessary to bind the core board with the gimbal using tool dji and vpn

denverhan commented 3 years ago

try downgrade and upgrage,if anyone made it fixed pls leave a message here

JefDrones commented 3 years ago

Here I am with the same problem after replacing the gimbal, the APP presents the error 40021, I am looking for a solution, many say that only official DJI software can solve it.

954426470 commented 2 years ago

removing the error 40011 is easily solved, while for the error 40021 it is necessary to bind the core board with the gimbal using tool dji and vpn

Can you solve 40021

954426470 commented 2 years ago

removing the error 40011 is easily solved, while for the error 40021 it is necessary to bind the core board with the gimbal using tool dji and vpn

Can you solve 40021

I can

alxgacc commented 2 years ago

Who needs remove error 40011 or 40021, you can write me on WhatsApp +62 812-8430-9143