Open ZaynHamza opened 2 years ago
Try asking in dji-rev, #hardware channel: https://github.com/Bin4ry/deejayeye-modder#want-to-contribute-or-learn-some-stuff
Hi rbeck425, I can confirm that the following commands work on mini 2 command 1 py comm_og_service_tool.py --port COM5 WM160 GimbalCalib JointCoarse
command 2 py comm_og_service_tool.py --port COM5 WM160 GimbalCalib LinearHall
providing that your drone is on com5
run dji assistant -consumer series click on log download (if I remember well) close assistant, make sure on device manager that your drone is listed as com and replace 5 with whatever com you are going to be on. You will see a gimbal calibration error on DJI fly app but the gimbal works fine. I fly Litchi and I cant see any error :)
I didn't try rolling back and forth the firmware so I cant comment on that. Here is a good video showing the process: https://www.ifixit.com/Guide/DJI+Mini+2+Gimbal+Calibration/153754 good luck, J
please help me with mini 2 calibration