search

o-gs / dji-firmware-tools

Tools for handling firmwares of DJI products, with focus on quadcopters.
GNU General Public License v3.0
1.51k stars 417 forks source link

DJI Phantom 3 advanced no image transmission and no record #75

Closed LukeM2602 closed 1 year ago

LukeM2602 commented 6 years ago

I have got a Phantom 3 adv that won’t record or transmit a signal to the phone I have tried different solutions like to downgrade or try another sd card but non of it won’t work. There is no light on gimble board but the gimble functions correctly any solutions like the soldering way to flash the chip if possiable

mefistotelis commented 6 years ago

You need to figure out a way to flash Ambarella A9 firmware. You may use A7 datasheet as a reference, as A9 one is hard to get. If it errors out while flashing, you'll have to replace the NAND chip. Please write about your progress, this is interesting subject.

LukeM2602 commented 6 years ago

Would you recon to flash it via the service points on the board like the pro version ??

mefistotelis commented 6 years ago

I don't have any board damaged this way.

LukeM2602 commented 6 years ago

It might work if you put a custom script on the memory of the gimble it’s self via the service points

mefistotelis commented 1 year ago

Not much info here, closing.