search

o0Zz / sys-con

Nintendo Switch sysmodule that allows support for third-party controllers (XBox, PSX, PC, ...)
GNU General Public License v3.0
74 stars 6 forks source link

Logitech G920 - Not Seen - No logs generated #48

Closed tadthies closed 4 weeks ago

tadthies commented 4 weeks ago

READ THE TROUBLESHOOTING GUIDE Before posting a new issue, please make sure to first read the Troubleshooting guide: https://github.com/o0Zz/sys-con/blob/master/doc/Troubleshooting.md

Information Atmosphere version: 1.7.x-1.8.x Switch OS version: 19.0.0 Syscon version: 1.43 Controller: Logitech G920 Nintendo Switch – OLED Model

Description I get no functionality of the wheel or pedals on the switch. i enabled logging at all the different levels, and no logs were produced. not even a empty log file. The steering wheel does it inital calibration when the switch is powered up with it plugged in, or when you plug it in to the switch that ios aleredy on. Nothing else. i tried booting the switch with the wheel plugged in as well as pluging the wheel in with the switch already on. i tried adding the diffrent drivers in the config file as well,

Logs

No logs were generated, tried all the different logging levels.

o0Zz commented 4 weeks ago

If there is no logs, it means sys-con is not loaded. Sys-con generate a log whatever happen. Look at a similar issue: #46 . You need to understand what block sys-con on your setup.(or maybe installation issue)

o0Zz commented 4 weeks ago

In case it helps: https://github.com/o0Zz/sys-con/blob/master/doc/Troubleshooting.md#i-dont-see-any-logs-in-configsys-conloglog