curl: (26) Failed to open/read local data from file/application

[nevusZ]

hy, we setup many pa 410 using your script. Thank you very much. the last devices had errors, please see below. config upload not working! the last devices had problems. there was a new delivery of hardware which had other shipped software than before also a update of the host device was done ubuntu2204 to 2404 can you tell me why the script can't upload config?

########### WARNING ########### You have selected to commit a custom configuration file after the upgrade. 09:01:50 The required version is already installed. 09:01:50 Setting Panorama authkey 2:<key> on [fe80::8e36:7aff:fe03:5e25] success 09:01:50 Uploading config on [fe80::8e36:7aff:fe03:5e25] 09:01:51 Firewall at [fe80::8e36:7aff:fe03:5e25] is now up. Uploading config... curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application curl: (26) Failed to open/read local data from file/application

[nevusZ]

debug `+ (( EASY == 1 ))

• (( NON_INTERACTIVE == 1 ))
• FIREWALL_ADDRESS='[fe80::8e36:7aff:fe03:5e25]'
• USERNAME=admin
• ACTIVE_PASSWORD=secret
• SOFTWARE_FOLDER=/home/ubuntu/paloversion-main
• DESIRED_VERSION=10.2.10
• NETWORK_INTERFACE=enp0s31f6
• (( INSTALL_THREATS == 1 ))
• (( INSTALL_THREATS == 1 ))
• (( SET_PRA_AUTHKEY == 1 ))
• [[ '' != '' ]]
• (( BATCH_MODE != 1 ))
• [[ [fe80::8e36:7aff:fe03:5e25] =~ ^(([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5]).){3}([0-9]|[1-9][0-9]|1[0-9]{2}|2[0-4][0-9]|25[0-5])$ ]]
• [[ [fe80::8e36:7aff:fe03:5e25] =~ : ]]
• (( INSTALL_CONFIG == 1 ))
• echo '########### WARNING ###########' ########### WARNING ###########
• echo 'You have selected to commit a custom configuration file after the upgrade.' You have selected to commit a custom configuration file after the upgrade. ++ date +%s
• TIME_START=1731073221
• (( BATCH_MODE == 1 ))
• ESCAPED_PASS= ++ echo secret ++ sed -r 's/({|}|[|])/\\1/g'
• ESCAPED_PASS=secret
• curler 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=keygen&user=admin&password=secret' /response/@status 10
• local REBOOT_ENDING
• REBOOT_ENDING=0
• local RETRYING_CURLER
• RETRYING_CURLER=0
• local CURLER_EVALS_1
• CURLER_EVALS_1=0
• local CURLER_EVALS_2
• CURLER_EVALS_2=0
• local CURLER_SECONDS_3
• CURLER_SECONDS_3=0
• local API_SESS_RETRY
• API_SESS_RETRY=0
• local KEEPALIVE
• local CURL
• local CURL_2
• local CURL_3
• local CURL_4
• local ARG3=10
• local CURL_RET_CODE
• true
• CURL=
• CURL_2=
• CURL_3=
• CURL_4=
• (( RETRYING_CURLER != 1 ))
• SECONDS=0
• RETRYING_CURLER=0
• KEEPALIVE=60
• (( SECONDS < ARG3 ))
• [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=keygen&user=admin&password=secret =~ fe80 ]] ++ curl -k -s -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 '' '' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=keygen&user=admin&password=secret'
• CURL='<response status = '\''success'\''>LUFRPT12Z2xVYWZrZ2UwWXRDWHYxZm1sdncrRnBSeXc9eUxSLzVLN1Y1WjFhRHFxcXZiQ2NMOXZPR0dXbytQUzdwT3dINmk0aC83aFBLblpURVFoZkhYbWdPdURra1dGcw=='
• CURL_RET_CODE=0
• (( CURL_RET_CODE == 52 ))
• (( CURL_RET_CODE == 60 )) ++ echo '<response status = '\''success'\''>LUFRPT12Z2xVYWZrZ2UwWXRDWHYxZm1sdncrRnBSeXc9eUxSLzVLN1Y1WjFhRHFxcXZiQ2NMOXZPR0dXbytQUzdwT3dINmk0aC83aFBLblpURVFoZkhYbWdPdURra1dGcw==' ++ xmlstarlet sel -t -v /response/@status
• CURL_2=success
• [[ success != '' ]]
• break
• [[ LUFRPT12Z2xVYWZrZ2UwWXRDWHYxZm1sdncrRnBSeXc9eUxSLzVLN1Y1WjFhRHFxcXZiQ2NMOXZPR0dXbytQUzdwT3dINmk0aC83aFBLblpURVFoZkhYbWdPdURra1dGcw== != '' ]]
• [[ success == '' ]] ++ echo '<response status = '\''success'\''>LUFRPT12Z2xVYWZrZ2UwWXRDWHYxZm1sdncrRnBSeXc9eUxSLzVLN1Y1WjFhRHFxcXZiQ2NMOXZPR0dXbytQUzdwT3dINmk0aC83aFBLblpURVFoZkhYbWdPdURra1dGcw==' ++ xmlstarlet sel -t -v /response/@status
• [[ success == \s\u\c\c\e\s\s ]]
• local OUTPUT
• [[ '' == \r\a\w ]] ++ echo '<response status = '\''success'\''>LUFRPT12Z2xVYWZrZ2UwWXRDWHYxZm1sdncrRnBSeXc9eUxSLzVLN1Y1WjFhRHFxcXZiQ2NMOXZPR0dXbytQUzdwT3dINmk0aC83aFBLblpURVFoZkhYbWdPdURra1dGcw==' ++ xmlstarlet sel -t -v /response/@status
• OUTPUT=success
• echo success
• return 0
• checkAutoCom '[fe80::8e36:7aff:fe03:5e25]'
• local AUTOCOM_STATUS
• local RAW_RESPONSE
• local FAILURE_REASON
• SECONDS=0
• local KEEPALIVE
• KEEPALIVE=60
• (( SECONDS < 1800 )) ++ curler 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' ' ' 10 ' ' ' ' raw ++ local REBOOT_ENDING ++ REBOOT_ENDING=0 ++ local RETRYING_CURLER ++ RETRYING_CURLER=0 ++ local CURLER_EVALS_1 ++ CURLER_EVALS_1=0 ++ local CURLER_EVALS_2 ++ CURLER_EVALS_2=0 ++ local CURLER_SECONDS_3 ++ CURLER_SECONDS_3=0 ++ local API_SESS_RETRY ++ API_SESS_RETRY=0 ++ local KEEPALIVE ++ local CURL ++ local CURL_2 ++ local CURL_3 ++ local CURL_4 ++ local ARG3=10 ++ local CURL_RET_CODE ++ true ++ CURL= ++ CURL_2= ++ CURL_3= ++ CURL_4= ++ (( RETRYING_CURLER != 1 )) ++ SECONDS=0 ++ RETRYING_CURLER=0 ++ KEEPALIVE=60 ++ (( SECONDS < ARG3 )) ++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd= =~ fe80 ]] +++ curl -k -s -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 ' ' ' ' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' ++ CURL='2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' ++ CURL_RET_CODE=0 ++ (( CURL_RET_CODE == 52 )) ++ (( CURL_RET_CODE == 60 )) +++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' +++ xmlstarlet sel -t -v /response/@status ++ CURL_2=success ++ [[ success != '' ]] ++ break ++ [[ 2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  != '' ]] ++ [[ success == '' ]] +++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' +++ xmlstarlet sel -t -v /response/@status ++ [[ success == \s\u\c\c\e\s\s ]] ++ local OUTPUT ++ [[ raw == \r\a\w ]] ++ OUTPUT='2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' ++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' ++ return 0
• RAW_RESPONSE='2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' ++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' ++ xmlstarlet sel -t -c 'count(/response/result/job)'
• JOB_AMOUNT=3 ++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' ++ xmlstarlet sel -t -m '/response/result/job[type='\''AutoCom'\'']' -v result
• AUTOCOM_STATUS=OK
• [[ OK =~ OK ]]
• JUST_REBOOTED=0
• return 0 ++ curler 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' /response/result/system/family 10 ++ local REBOOT_ENDING ++ REBOOT_ENDING=0 ++ local RETRYING_CURLER ++ RETRYING_CURLER=0 ++ local CURLER_EVALS_1 ++ CURLER_EVALS_1=0 ++ local CURLER_EVALS_2 ++ CURLER_EVALS_2=0 ++ local CURLER_SECONDS_3 ++ CURLER_SECONDS_3=0 ++ local API_SESS_RETRY ++ API_SESS_RETRY=0 ++ local KEEPALIVE ++ local CURL ++ local CURL_2 ++ local CURL_3 ++ local CURL_4 ++ local ARG3=10 ++ local CURL_RET_CODE ++ true ++ CURL= ++ CURL_2= ++ CURL_3= ++ CURL_4= ++ (( RETRYING_CURLER != 1 )) ++ SECONDS=0 ++ RETRYING_CURLER=0 ++ KEEPALIVE=60 ++ (( SECONDS < ARG3 )) ++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd= =~ fe80 ]] +++ curl -k -s -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 '' '' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' ++ CURL='PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:15 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' ++ CURL_RET_CODE=0 ++ (( CURL_RET_CODE == 52 )) ++ (( CURL_RET_CODE == 60 )) +++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:15 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ xmlstarlet sel -t -v /response/@status ++ CURL_2=success ++ [[ success != '' ]] ++ break ++ [[ PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:15 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None != '' ]] ++ [[ success == '' ]] +++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:15 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ xmlstarlet sel -t -v /response/@status ++ [[ success == \s\u\c\c\e\s\s ]] ++ local OUTPUT ++ [[ '' == \r\a\w ]] +++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:15 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ xmlstarlet sel -t -v /response/result/system/family ++ OUTPUT=400 ++ echo 400 ++ return 0
• PLATFORM=400 ++ curler 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' /response/result/system/sw-version 10 ++ local REBOOT_ENDING ++ REBOOT_ENDING=0 ++ local RETRYING_CURLER ++ RETRYING_CURLER=0 ++ local CURLER_EVALS_1 ++ CURLER_EVALS_1=0 ++ local CURLER_EVALS_2 ++ CURLER_EVALS_2=0 ++ local CURLER_SECONDS_3 ++ CURLER_SECONDS_3=0 ++ local API_SESS_RETRY ++ API_SESS_RETRY=0 ++ local KEEPALIVE ++ local CURL ++ local CURL_2 ++ local CURL_3 ++ local CURL_4 ++ local ARG3=10 ++ local CURL_RET_CODE ++ true ++ CURL= ++ CURL_2= ++ CURL_3= ++ CURL_4= ++ (( RETRYING_CURLER != 1 )) ++ SECONDS=0 ++ RETRYING_CURLER=0 ++ KEEPALIVE=60 ++ (( SECONDS < ARG3 )) ++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd= =~ fe80 ]] +++ curl -k -s -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 '' '' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' ++ CURL='PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' ++ CURL_RET_CODE=0 ++ (( CURL_RET_CODE == 52 )) ++ (( CURL_RET_CODE == 60 )) +++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ xmlstarlet sel -t -v /response/@status ++ CURL_2=success ++ [[ success != '' ]] ++ break ++ [[ PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None != '' ]] ++ [[ success == '' ]] +++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ xmlstarlet sel -t -v /response/@status ++ [[ success == \s\u\c\c\e\s\s ]] ++ local OUTPUT ++ [[ '' == \r\a\w ]] +++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:54 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ xmlstarlet sel -t -v /response/result/system/sw-version ++ OUTPUT=10.2.10 ++ echo 10.2.10 ++ return 0
• CURRENT_VERSION=10.2.10 ++ curler 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' /response/result/system/serial 10 ++ local REBOOT_ENDING ++ REBOOT_ENDING=0 ++ local RETRYING_CURLER ++ RETRYING_CURLER=0 ++ local CURLER_EVALS_1 ++ CURLER_EVALS_1=0 ++ local CURLER_EVALS_2 ++ CURLER_EVALS_2=0 ++ local CURLER_SECONDS_3 ++ CURLER_SECONDS_3=0 ++ local API_SESS_RETRY ++ API_SESS_RETRY=0 ++ local KEEPALIVE ++ local CURL ++ local CURL_2 ++ local CURL_3 ++ local CURL_4 ++ local ARG3=10 ++ local CURL_RET_CODE ++ true ++ CURL= ++ CURL_2= ++ CURL_3= ++ CURL_4= ++ (( RETRYING_CURLER != 1 )) ++ SECONDS=0 ++ RETRYING_CURLER=0 ++ KEEPALIVE=60 ++ (( SECONDS < ARG3 )) ++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd= =~ fe80 ]] +++ curl -k -s -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 '' '' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' ++ CURL='PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:55 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' ++ CURL_RET_CODE=0 ++ (( CURL_RET_CODE == 52 )) ++ (( CURL_RET_CODE == 60 )) +++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:55 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ xmlstarlet sel -t -v /response/@status ++ CURL_2=success ++ [[ success != '' ]] ++ break ++ [[ PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:55 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None != '' ]] ++ [[ success == '' ]] +++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:55 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ xmlstarlet sel -t -v /response/@status ++ [[ success == \s\u\c\c\e\s\s ]] ++ local OUTPUT ++ [[ '' == \r\a\w ]] +++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:16 2024 1 days, 22:42:55 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ xmlstarlet sel -t -v /response/result/system/serial ++ OUTPUT=023101036096 ++ echo 023101036096 ++ return 0
• SERIAL_NUMBER=023101036096
• (( EASY != 1 ))
• versionPresent 400.csv 10.2.10
• PRESENT=0
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.0 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.1 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.2 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.3 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.3-h2 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.4 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.4-h4 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.5 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.5-h1 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.5-h2 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.5-h3 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.6 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.6-h3 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.6-h6 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.6-h7 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.7 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.8 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.8-h2 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.8-h6 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.9 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.9-h1 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.9-h3 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.10 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.10-h1 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.10-h2 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.11 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.1.11-h1 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.0 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.1 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.2 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.2-h2 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.3 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.3-h2 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.3-h4 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.3-h9 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.4 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.4-h2 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.4-h3 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.4-h4 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.5 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.6 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.7 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.8 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.9 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.9-h1 == \1\0.\2.\1\0 ]]
• continue
• IFS=,
• read -r Order Name Major Type File Checksum
• [[ 10.2.10 == \1\0.\2.\1\0 ]]
• PRESENT=1
• break
• (( PRESENT == 0 ))
• [[ 10.2.10 =~ ^[0-9].0. ]] ++ curler 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' /response/result 10 ++ local REBOOT_ENDING ++ REBOOT_ENDING=0 ++ local RETRYING_CURLER ++ RETRYING_CURLER=0 ++ local CURLER_EVALS_1 ++ CURLER_EVALS_1=0 ++ local CURLER_EVALS_2 ++ CURLER_EVALS_2=0 ++ local CURLER_SECONDS_3 ++ CURLER_SECONDS_3=0 ++ local API_SESS_RETRY ++ API_SESS_RETRY=0 ++ local KEEPALIVE ++ local CURL ++ local CURL_2 ++ local CURL_3 ++ local CURL_4 ++ local ARG3=10 ++ local CURL_RET_CODE ++ true ++ CURL= ++ CURL_2= ++ CURL_3= ++ CURL_4= ++ (( RETRYING_CURLER != 1 )) ++ SECONDS=0 ++ RETRYING_CURLER=0 ++ KEEPALIVE=60 ++ (( SECONDS < ARG3 )) ++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd= =~ fe80 ]] +++ curl -k -s -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 '' '' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' ++ CURL='Zero touch provisioning disabled by user' ++ CURL_RET_CODE=0 ++ (( CURL_RET_CODE == 52 )) ++ (( CURL_RET_CODE == 60 )) +++ echo 'Zero touch provisioning disabled by user' +++ xmlstarlet sel -t -v /response/@status ++ CURL_2=success ++ [[ success != '' ]] ++ break ++ [[ Zero touch provisioning disabled by user != '' ]] ++ [[ success == '' ]] +++ echo 'Zero touch provisioning disabled by user' +++ xmlstarlet sel -t -v /response/@status ++ [[ success == \s\u\c\c\e\s\s ]] ++ local OUTPUT ++ [[ '' == \r\a\w ]] +++ echo 'Zero touch provisioning disabled by user' +++ xmlstarlet sel -t -v /response/result ++ OUTPUT='Zero touch provisioning disabled by user' ++ echo 'Zero touch provisioning disabled by user' ++ return 0
• ZTP_ACTIVE='Zero touch provisioning disabled by user'
• [[ Zero touch provisioning disabled by user =~ connect to ztp service ]]
• (( UPLOAD_LICENSES == 1 || INSTALL_CONFIG == 1 ))
• [[ 023101036096 == \u\n\k\n\o\w\n ]]
• (( EASY == 1 ))
• [[ 10.2.10 == \1\0.\2.\1\0 ]]
• date '+%T The required version is already installed.' 14:40:26 The required version is already installed.
• (( UPLOAD_LICENSES == 1 ))
• (( INSTALL_THREATS == 1 ))
• (( SET_PRA_AUTHKEY == 1 ))
• (( INSTALL_CONFIG == 1 ))
• date '+%T Uploading config on [fe80::8e36:7aff:fe03:5e25]' 14:40:26 Uploading config on [fe80::8e36:7aff:fe03:5e25] ++ loadConfig 023101036096 +++ find /home/ubuntu/paloversion-main -name 023101036096-config.xml ++ FILE_PATH='/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' ++ [[ /home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml == '' ]] ++ (( DRY_RUN == 1 )) ++ checkAutoCom '[fe80::8e36:7aff:fe03:5e25]' ++ local AUTOCOM_STATUS ++ local RAW_RESPONSE ++ local FAILURE_REASON ++ SECONDS=0 ++ local KEEPALIVE ++ KEEPALIVE=60 ++ (( SECONDS < 1800 )) +++ curler 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' ' ' 10 ' ' ' ' raw +++ local REBOOT_ENDING +++ REBOOT_ENDING=0 +++ local RETRYING_CURLER +++ RETRYING_CURLER=0 +++ local CURLER_EVALS_1 +++ CURLER_EVALS_1=0 +++ local CURLER_EVALS_2 +++ CURLER_EVALS_2=0 +++ local CURLER_SECONDS_3 +++ CURLER_SECONDS_3=0 +++ local API_SESS_RETRY +++ API_SESS_RETRY=0 +++ local KEEPALIVE +++ local CURL +++ local CURL_2 +++ local CURL_3 +++ local CURL_4 +++ local ARG3=10 +++ local CURL_RET_CODE +++ true +++ CURL= +++ CURL_2= +++ CURL_3= +++ CURL_4= +++ (( RETRYING_CURLER != 1 )) +++ SECONDS=0 +++ RETRYING_CURLER=0 +++ KEEPALIVE=60 +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd= =~ fe80 ]] ++++ curl -k -s -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 ' ' ' ' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' +++ CURL='2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' +++ CURL_RET_CODE=0 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2=success +++ [[ success != '' ]] +++ break +++ [[ 2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  != '' ]] +++ [[ success == '' ]] ++++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' ++++ xmlstarlet sel -t -v /response/@status +++ [[ success == \s\u\c\c\e\s\s ]] +++ local OUTPUT +++ [[ raw == \r\a\w ]] +++ OUTPUT='2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' +++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' +++ return 0 ++ RAW_RESPONSE='2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' +++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' +++ xmlstarlet sel -t -c 'count(/response/result/job)' ++ JOB_AMOUNT=3 +++ echo '2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  2024/11/06 07:00:5507:01:022AutoComFINNOnoOK2024/11/06 07:02:250100
  Configuration committed successfullySuccessfully committed last configuration
  2024/11/06 07:02:2007:02:203Device-certificate-fetchFINNOnoFAIL2024/11/06 07:03:270100
  ' +++ xmlstarlet sel -t -m '/response/result/job[type='\''AutoCom'\'']' -v result ++ AUTOCOM_STATUS=OK ++ [[ OK =~ OK ]] ++ JUST_REBOOTED=0 ++ return 0 ++ local RESULT_CUPLOAD_1 +++ curler 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' /response/@status 10 +++ local REBOOT_ENDING +++ REBOOT_ENDING=0 +++ local RETRYING_CURLER +++ RETRYING_CURLER=0 +++ local CURLER_EVALS_1 +++ CURLER_EVALS_1=0 +++ local CURLER_EVALS_2 +++ CURLER_EVALS_2=0 +++ local CURLER_SECONDS_3 +++ CURLER_SECONDS_3=0 +++ local API_SESS_RETRY +++ API_SESS_RETRY=0 +++ local KEEPALIVE +++ local CURL +++ local CURL_2 +++ local CURL_3 +++ local CURL_4 +++ local ARG3=10 +++ local CURL_RET_CODE +++ true +++ CURL= +++ CURL_2= +++ CURL_3= +++ CURL_4= +++ (( RETRYING_CURLER != 1 )) +++ SECONDS=0 +++ RETRYING_CURLER=0 +++ KEEPALIVE=60 +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd= =~ fe80 ]] ++++ curl -k -s -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 '' '' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=op&cmd=' +++ CURL='PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:17 2024 1 days, 22:42:56 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' +++ CURL_RET_CODE=0 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:17 2024 1 days, 22:42:56 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2=success +++ [[ success != '' ]] +++ break +++ [[ PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:17 2024 1 days, 22:42:56 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None != '' ]] +++ [[ success == '' ]] ++++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:17 2024 1 days, 22:42:56 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' ++++ xmlstarlet sel -t -v /response/@status +++ [[ success == \s\u\c\c\e\s\s ]] +++ local OUTPUT +++ [[ '' == \r\a\w ]] ++++ echo 'PA-410192.168.1.1unknown255.255.255.0nounknownfe80::8e36:7aff:fe03:5e25/648c:36:7a:03:5e:25Fri Nov 8 05:40:17 2024 1 days, 22:42:56 PA-410 400PA-410023101036096non-cloud 10.2.10 0.0.0 0 8614-7547 0 0 0 unknown paloaltonetworks 0 Disabled 0000.00.00.000 0 unknown0 10.2.0 400 off off Disablednormal off None' ++++ xmlstarlet sel -t -v /response/@status +++ OUTPUT=success +++ echo success +++ return 0 ++ RESULT_CUPLOAD_1=success ++ [[ success != \s\u\c\c\e\s\s ]] ++ date '+%T Firewall at [fe80::8e36:7aff:fe03:5e25] is now up. Uploading config...' 14:40:27 Firewall at [fe80::8e36:7aff:fe03:5e25] is now up. Uploading config... ++ local RESULT_CUPLOAD_2 ++ SILENT_CURL= +++ curler 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration' /response/@status 300 -F 'file=@/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' +++ local REBOOT_ENDING +++ REBOOT_ENDING=0 +++ local RETRYING_CURLER +++ RETRYING_CURLER=0 +++ local CURLER_EVALS_1 +++ CURLER_EVALS_1=0 +++ local CURLER_EVALS_2 +++ CURLER_EVALS_2=0 +++ local CURLER_SECONDS_3 +++ CURLER_SECONDS_3=0 +++ local API_SESS_RETRY +++ API_SESS_RETRY=0 +++ local KEEPALIVE +++ local CURL +++ local CURL_2 +++ local CURL_3 +++ local CURL_4 +++ local ARG3=300 +++ local CURL_RET_CODE +++ true +++ CURL= +++ CURL_2= +++ CURL_3= +++ CURL_4= +++ (( RETRYING_CURLER != 1 )) +++ SECONDS=0 +++ RETRYING_CURLER=0 +++ KEEPALIVE=60 +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration =~ fe80 ]] ++++ curl -k -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 -F 'file=@/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration' curl: (26) Failed to open/read local data from file/application +++ CURL= +++ CURL_RET_CODE=26 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo '' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2= +++ [[ '' != '' ]] +++ (( JUST_REBOOTED == 1 )) +++ sleep 1 +++ (( SECONDS >= KEEPALIVE )) +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration =~ fe80 ]] ++++ curl -k -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 -F 'file=@/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration' curl: (26) Failed to open/read local data from file/application +++ CURL= +++ CURL_RET_CODE=26 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo '' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2= +++ [[ '' != '' ]] +++ (( JUST_REBOOTED == 1 )) +++ sleep 1 +++ (( SECONDS >= KEEPALIVE )) +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration =~ fe80 ]] ++++ curl -k -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 -F 'file=@/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration' curl: (26) Failed to open/read local data from file/application +++ CURL= +++ CURL_RET_CODE=26 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo '' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2= +++ [[ '' != '' ]] +++ (( JUST_REBOOTED == 1 )) +++ sleep 1 +++ (( SECONDS >= KEEPALIVE )) +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration =~ fe80 ]] ++++ curl -k -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 -F 'file=@/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration' curl: (26) Failed to open/read local data from file/application +++ CURL= +++ CURL_RET_CODE=26 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo '' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2= +++ [[ '' != '' ]] +++ (( JUST_REBOOTED == 1 )) +++ sleep 1 +++ (( SECONDS >= KEEPALIVE )) +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration =~ fe80 ]] ++++ curl -k -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 -F 'file=@/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration' curl: (26) Failed to open/read local data from file/application +++ CURL= +++ CURL_RET_CODE=26 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo '' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2= +++ [[ '' != '' ]] +++ (( JUST_REBOOTED == 1 )) +++ sleep 1 +++ (( SECONDS >= KEEPALIVE )) +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration =~ fe80 ]] ++++ curl -k -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 -F 'file=@/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration' curl: (26) Failed to open/read local data from file/application +++ CURL= +++ CURL_RET_CODE=26 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo '' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2= +++ [[ '' != '' ]] +++ (( JUST_REBOOTED == 1 )) +++ sleep 1 +++ (( SECONDS >= KEEPALIVE )) +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration =~ fe80 ]] ++++ curl -k -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 -F 'file=@/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration' curl: (26) Failed to open/read local data from file/application +++ CURL= +++ CURL_RET_CODE=26 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo '' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2= +++ [[ '' != '' ]] +++ (( JUST_REBOOTED == 1 )) +++ sleep 1 +++ (( SECONDS >= KEEPALIVE )) +++ (( SECONDS < ARG3 )) +++ [[ https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration =~ fe80 ]] ++++ curl -k -6 --interface enp0s31f6 -u admin:secret --max-time 1800 --connect-timeout 3 -F 'file=@/home/ubuntu/paloversion-main/old/023101036096-config.xml /home/ubuntu/paloversion-main/023101036096-config.xml' 'https://[fe80::8e36:7aff:fe03:5e25]/api/?type=import&category=configuration' curl: (26) Failed to open/read local data from file/application +++ CURL= +++ CURL_RET_CODE=26 +++ (( CURL_RET_CODE == 52 )) +++ (( CURL_RET_CODE == 60 )) ++++ echo '' ++++ xmlstarlet sel -t -v /response/@status +++ CURL_2= +++ [[ '' != '' ]] +++ (( JUST_REBOOTED == 1 )) +++ sleep 1 `

[o5edaxi]

Hi,

it's great to hear that the script is helping you. Can you try again after removing "/home/ubuntu/paloversion-main/old/023101036096-config.xml"?

It seems there are 2 files with the same name in the config directory, the script isn't smart enough to handle that at the moment.

[nevusZ]

hy, thank you for your reply. you are right, there are 2 files but one is in a subdir "old" i needed that device urgently, so i made the panorama connect without the script. but next time i know what is wrong.

thanks a lot