oblique create_ap issues

oblique / create_ap

[NOT MAINTAINED] This script creates a NATed or Bridged WiFi Access Point.

BSD 2-Clause "Simplified" License

4.45k stars 1k forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

ERROR: Your adapter can not be a station (i.e. be connected) and an AP at the same time

#471 ismail555566 opened 3 years ago
0
Add specific clients to the network !!!

#470 zakariaoussete opened 3 years ago
0
WIP : Reference PR for comments

#469 waddle77 closed 3 years ago
1
Can't use AP Mode on linux but I can use it on Windows

#468 MohammedMehdiTBER opened 3 years ago
1
i have a error to create hotspot

#467 Reisen1969 opened 3 years ago
0
ERROR: Your adapter can not transmit to channel 13, frequency band 2.4GHz.

#466 ChinaParrot opened 3 years ago
1
Hotspot created but cannot be discovered

#465 fevsoftware opened 3 years ago
0
How to automatically open the specified web page after connecting to WiFi

#464 szpebble opened 3 years ago
0
Announcing linux-router. I forked create_ap and have been improving it for more than 2 years

#463 garywill opened 3 years ago
3
Oblique

#462 skitsoeffectedpolarbear closed 3 years ago
0
Jo

#461 145joshua closed 3 years ago
0
modprobe: FATAL: Module ip_tables not found in directory /lib/modules

#460 wwdok opened 4 years ago
0
wlan0:INTERFACE-DISABLED

#459 wwdok opened 4 years ago
0
Welcome contributors to the GUI version of this project

#458 lakinduakash closed 4 years ago
4
it too slow when use Hotspot in ubuntu

#457 nesteiner opened 4 years ago
1
Creating a WAP from RPi4

#456 kashishdhal closed 4 years ago
2
device cannot connect and stuck at `Obtaining IP address...`

#455 basilrabi closed 4 years ago
2
Error: Failed to run hostapd, maybe a program is interfering.

#454 chris-brown-nz opened 4 years ago
0
ERROR: Your adapter can not be a station (i.e. be connected) and an AP at the same time

#453 Shabinder closed 3 years ago
1
Add WPS support

#452 legithubert opened 4 years ago
0
Device that's bridging eth0 to wlan0 does not have its own IP

#451 tarikaltuncu opened 4 years ago
1
SHARE_METHOD=none not working

#450 GoncaloR00 closed 4 years ago
1
Should bring up WiFi when ppp fails

#449 adrianmay opened 4 years ago
0
ERROR: Your adapter does not support AP (master) mode

#448 lasyka opened 4 years ago
0
Once Ap is enabled in bridged mode, no access to apache2 website.

#447 balloffloof opened 4 years ago
0
create_ap fails silently

#446 zyoungdev opened 4 years ago
0
create debian package

#445 adelolmo closed 4 years ago
0
repeater config of create_ap

#444 sanfx opened 4 years ago
0
Makefile: Make sure to use $DESTDIR when checking absolute paths

#443 jcormier opened 4 years ago
0
Bridge mode does not work

#442 montvid opened 4 years ago
0
restart create_ap after suspend-and-resume

#441 dlenski opened 4 years ago
1
Multi "Device Not Managed" error

#440 Ed-09 opened 4 years ago
0
Arch linux package out of date

#439 cmoralesmx opened 4 years ago
3
wlan0 to wlan1 bridge

#438 ghost opened 4 years ago
2
Connected to my AP but no connection !

#437 Ed-09 opened 4 years ago
1
add option to set AP's beacon interval

#436 dlenski opened 4 years ago
0
allow channel of 0 or acs_survey for automatic channel selection

#435 dlenski opened 4 years ago
7
Clarify options, and make backups when installing create_ap.conf file

#434 dlenski opened 4 years ago
0
An error about “iptables v1.8.4 (nf_tables)”

#433 woodenhead86 closed 4 years ago
1
Create_ap runs without problems but the access Point is not to be found

#432 federico-leuze opened 4 years ago
1
Add WEP support from config file

#431 akarilimano opened 4 years ago
2
Auto Channel Select (ACS) feature in script

#430 artynet opened 4 years ago
1
How to turn off power saving in ap0?

#429 nevilmathew opened 4 years ago
1
Yet another " Your adapter can not transmit to channel xxx, frequency band 5G"

#428 gitxmax opened 4 years ago
7
Generate QR code like

#427 pickfire opened 4 years ago
2
Add some security options

#426 artemislena opened 4 years ago
0
Script hangs while creating bridge - somewhere between line 1743 and 1754

#425 artemislena opened 4 years ago
0
Fix for AC wifi to enable 80 mhz channels

#424 montvid opened 4 years ago
1
The connection speed is always 65Mbps

#423 MoeNek opened 4 years ago
1
Updated README.md file for better understanding for users reading it.

#422 aswinrprasad opened 4 years ago
0