I am trying to use zenpower. When I install it, and use sensors or psensor, I do not get any data about the CPU temperature. In my attempts to use zenmonitor, I get an error saying Zen CPU Not Detected.
This is the output of lscpu, indicating that the CPU is recongized by my system.
gauravkuppa24@gauravkuppa24:~/Documents/zenmonitor$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 48 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Vendor ID: AuthenticAMD
Model name: AMD Ryzen 9 7950X 16-Core Processor
CPU family: 25
Model: 97
Thread(s) per core: 2
Core(s) per socket: 16
Socket(s): 1
Stepping: 2
Frequency boost: enabled
CPU max MHz: 4500.0000
CPU min MHz: 3000.0000
BogoMIPS: 8982.94
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mc
a cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall n
x mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_go
od nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl p
ni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe
popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy sv
m extapic cr8_legacy abm sse4a misalignsse 3dnowprefetc
h osvw ibs skinit wdt tce topoext perfctr_core perfctr_
nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate
ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 sm
ep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed
adx smap avx512ifma clflushopt clwb avx512cd sha_ni avx
512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc c
qm_occup_llc cqm_mbm_total cqm_mbm_local avx512_bf16 cl
zero irperf xsaveerptr rdpru wbnoinvd cppc arat npt lbr
v svm_lock nrip_save tsc_scale vmcb_clean flushbyasid d
ecodeassists pausefilter pfthreshold avic v_vmsave_vmlo
ad vgif v_spec_ctrl avx512vbmi umip pku ospke avx512_vb
mi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx5
12_vpopcntdq rdpid overflow_recov succor smca fsrm flus
h_l1d
Virtualization features:
Virtualization: AMD-V
Caches (sum of all):
L1d: 512 KiB (16 instances)
L1i: 512 KiB (16 instances)
L2: 16 MiB (16 instances)
L3: 64 MiB (2 instances)
NUMA:
NUMA node(s): 1
NUMA node0 CPU(s): 0-31
Vulnerabilities:
Gather data sampling: Not affected
Itlb multihit: Not affected
L1tf: Not affected
Mds: Not affected
Meltdown: Not affected
Mmio stale data: Not affected
Retbleed: Not affected
Spec rstack overflow: Mitigation; safe RET
Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
and seccomp
Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer
sanitization
Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIB
P always-on, RSB filling, PBRSB-eIBRS Not affected
Srbds: Not affected
Tsx async abort: Not affected
I am trying to use zenpower. When I install it, and use
sensors
orpsensor
, I do not get any data about the CPU temperature. In my attempts to use zenmonitor, I get an error saying Zen CPU Not Detected.This is the output of lscpu, indicating that the CPU is recongized by my system.
This is my output from tail cpufreq.