Heltec Lora 32 Version 3

oe1wkl / Morserino-32

Morserino-32 multi-functional Morse code machine, based on ESP32

GNU General Public License v3.0

243 stars 95 forks source link

Heltec Lora 32 Version 3 #93

Open netnutmike opened 7 months ago

netnutmike commented 7 months ago

I recently needed to replace my Lora32 board in one of my Moarserino 32s. I ended up with a version 3 board. I compiled version 5 and uploaded it to the V3 board no rpoblem but the screen is blank.

I am guessing that V5 might not be compatible with the Lora32 V3 board. I got no errors on the compile or upload.

I cannot find V2 boards for 915 anyhere except alibaba.

Any guidance on the V3 boards?

oe1wkl commented 7 months ago

V3 boards are not compatible with the Morserino-32, only V2.1 Heltec modules can be used. You can get V2.1 modules (but only for 433 MHz) at the Morserino web shop.

Willi OE1WKL

Am 12.02.2024 um 21:55 schrieb Mike Myers @.***>:

I recently needed to replace my Lora32 board in one of my Moarserino 32s. I ended up with a version 3 board. I compiled version 5 and uploaded it to the V3 board no rpoblem but the screen is blank.

I am guessing that V5 might not be compatible with the Lora32 V3 board. I got no errors on the compile or upload.

I cannot find V2 boards for 915 anyhere except alibaba.

— Reply to this email directly, view it on GitHub https://github.com/oe1wkl/Morserino-32/issues/93, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACZR72HBWHLNLPZXMBCARLTYTJ6VRAVCNFSM6AAAAABDFMA5ZSVHI2DSMVQWIX3LMV43ASLTON2WKOZSGEZTAOJWG42DKOI. You are receiving this because you are subscribed to this thread.

netnutmike commented 7 months ago

Thank you for the reply. I am in the US and trying to find a V2 board at 915 is pretty hard.

oe1wkl commented 7 months ago

Is there a reason you need the 915 MHz version? Licensed amateurs can use 430 MHz …

Am 14.02.2024 um 14:46 schrieb Mike Myers @.***>:

Thank you for the reply. I am in the US and trying to find a V2 board at 915 is pretty hard.

— Reply to this email directly, view it on GitHub https://github.com/oe1wkl/Morserino-32/issues/93#issuecomment-1943801792, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACZR72GG5WX5ZWZ3EVBYRJ3YTS537AVCNFSM6AAAAABDFMA5ZSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBTHAYDCNZZGI. You are receiving this because you commented.

netnutmike commented 7 months ago

That is true but to meet the letter of the law you have to ID in the data stream according to FCC rules. Also, there is the possibility someone could use it that is not licensed. No one would probbly ever notice or care. I have 3 of them and the other 2 are using 915 so I would have to find the heltecs that came with the Morserino and put them back in the other 2.

oe1wkl commented 5 months ago

As the protocol ahs been published, you can always ID with Morse code as ylou would with another transceiver. Re. I will have more 2.1 Heltec modules available in June.