External wireless card (Wlan1) not working with Kali NetHunter on Nexus 7 2013

[HawksRepos]

Device:

Nexus 7 2013 (wifi) 32gb

OS version (KitKat/Lollipop/Marshmallow/Nougat):

Marshmallow (6.0.1)

Built from repo (date and build command) or downloaded from website (links):

CM13 (13.0-20160820-SNAPSHOT-ZNH5YAO0J1-flo) (I can't find the download link now but after a lot of searching I found someone who compiled CM13 suitable for Nethunter 3.0)

Output of cat /proc/version in adb shell or NetHunter Terminal:

Linux version 3.4.0-cyagenmod-g80db3da (clyde@cyogenmod) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Aug 19 18:41:49 PDT 2016

Issue:

After several attempts of installing nethunter onto the stock ROM (after unlocking and rooting the device - with TWRP) i decided to try with CM13.

when i went with CM13 i managed to flash nethunter but with error codes in TWRP (also tried the CM recovery) and when i tried to boot the boot animation loaded realy slowly (like 1f/s) and never actually booted.

Eventually i managed to find someone who compiled their own version of CM13 & the nethunter install and it installed perfectly with no errors and booted up perfectly again with no errors (I now cannot find the link but still have the files on my computer if anybody needs reference). Now nethunter was working perfectly with full chroot. everything in Nethunter ws working perfectly along with the CM13 rom working perfectly.

I have the Alfa AWUS036NHA from playing about with the kali virtual machine on my laptop and wanted to try this with Nethunter. using just the OTG cable it was able to identify it with 'lsusb' but would not recognise it as a network card (typing 'ifconfig' there was no wlan1). So i ordered a 'y' OTG cable and had to wait for that. when i ordered that of amazon I thought I might aswell also get the TP-Link TL-WN722N with it as i heard this does not need external power and can be used with just the OTG cable.

Once i recieved the TP-Link TL-WN722N i was excited to try it out! only to have the same problem. with the OTG cable it recognised it with 'lsusb' but not as a network wlan1. i also tried with the 'y' OTG cable and had the same problem. I tried starting the kali service 'y-cable charging' to see if that would change anything but still the same story. I also have tried the Alpha AWUS036NHA and same story!!!

this is getting rather annoying now as i bought the Nexus 7 especialy for portable pentesting but it is not working.

I have also tried installing the Alfa firmware using 'apt-get install firmware-atheros' which installed without a problem but did not help with the probem.

I'm not sure how to paste the full 'dmesg' output into here at the moment (maybe someone can help with that also) but after plugging in the TP-link using the OTG cable i get the following (which i think is relevant) (just a few examples as i have had to type out):-

...

3.3V output enabled msm_otg msm_otg: Failed notifying 0 charger type to PMIC

...

aux operation failed 02 aux read failed Aux access error

...

msm_otg msm_otg: USB in low power mode slimport_is_connected: Slimport Dongle is detected msm_otg msm_otg: chg_type = USB_SDP_CHARGER

...

3.3V output disabled

...

sp_tx_power_down

...

sp_tx_hardware_powerdown: anx7808 power down

...

bq27541_battery_callback usb_cable_state = 0

battery_callback cable_wake_lock 5 sec...

...

the USB cable status = CHARGER_NONE msm_otg msm_otg: Failed notifying 0 charger type to PMIC

...

msm_otg msm_otg: USB in low power mode vbus_otg is NULL. smb345_charger: [smb345_otg_status] otg function: on msm_otg msm_otg: phy_reset: sucess Host mode: Set DC level as 0x68 for flo. msm_hsusb_host msm_hsusb_host: Qualcom On-Chip EHCI Host Controller SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts msm_hsusb_host msm_hsusb_host: new USB bus registered, assigned bus number 1 root@kali:~#

if anybody could help it would be greatly appretiated!! I have only just recently got into linux, kali and nethunter (although feeling fairly confident now) so you may have to bare with me on the technicalities etc. i am fairly confident with flashing etc as i have cm14 running well on my samsung S5. I have been enjoying using that so decided to push it further and start learning some pentesting and enjoyed that on a kali virtual machine but now would like to be more portable than carying around a laptop hence now trying nethunter.

Thanks in advance for any help you can offer.

[HawksRepos]

Managed to copy the 'dmesg'

This is initial boot, plug the TP-Link TL-WN722N in and then pull out:-

Last login: Thu Dec 15 17:18:08 UTC 2016 on pts/2 Linux kali 3.4.0-cyanogenmod-g80db3da #1 SMP PREEMPT Fri Aug 19 18:41:49 PDT 2016 armv7l

The programs included with the Kali GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright.

Kali GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@kali:~# dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.0-cyanogenmod-g80db3da (clyde@cyanogenmod) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Aug 19 18:41:49 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine: QCT APQ8064 FLO [ 0.000000] Truncating memory at 0x90000000 to fit in 32-bit physical address space [ 0.000000] cma: CMA: reserved 8 MiB at af800000 [ 0.000000] memory pool 3 (start 0xfe100000 size 1e00000) initialized [ 0.000000] Initialized persistent memory from 88d00000-88dfffff [ 0.000000] cma: CMA: reserved 16 MiB at ab800000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536 [ 0.000000] accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4 [ 0.000000] On node 0 totalpages: 480255 [ 0.000000] free_area_init_node: node 0, pgdat c10849c0, node_mem_map c2101000 [ 0.000000] Normal zone: 1426 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 145262 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2666 pages used for memmap [ 0.000000] HighMem zone: 330901 pages, LIFO batch:31 [ 0.000000] allocating 44236800 bytes at c3107000 (83307000 physical) for fb [ 0.000000] PERCPU: Embedded 7 pages/cpu @c5b3a000 s16384 r0 d12288 u32768 [ 0.000000] pcpu-alloc: s16384 r0 d12288 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 476163 [ 0.000000] Kernel command line: androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 vmalloc=340M androidboot.emmc=true androidboot.serialno=0a265ebc bootreason=Reboot fuse_info=Y ddr_vendor=hynix androidboot.baseband=apq asustek.hw_rev=rev_e androidboot.bootloader=FLO-04.08 [ 0.000000] HW Revision: ASUSTek input rev_e [ 0.000000] HW Revision: ASUSTek matched rev_e [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 4190200 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 140MB 58MB 4MB 7MB 254MB 1412MB 0MB = 1875MB total [ 0.000000] Memory: 1811304k/1811304k available, 237716k reserved, 1326076K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] timers : 0xfffef000 - 0xffff0000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xed000000 - 0xff000000 ( 288 MB) [ 0.000000] lowmem : 0xcfe00000 - 0xec900000 ( 459 MB) [ 0.000000] vmalloc : 0xcfc00000 - 0xcfe00000 ( 2 MB) [ 0.000000] lowmem : 0xcf500000 - 0xcfc00000 ( 7 MB) [ 0.000000] vmalloc : 0xcee00000 - 0xcf500000 ( 7 MB) [ 0.000000] lowmem : 0xcea00000 - 0xcee00000 ( 4 MB) [ 0.000000] vmalloc : 0xcd800000 - 0xcea00000 ( 18 MB) [ 0.000000] lowmem : 0xc9e00000 - 0xcd800000 ( 58 MB) [ 0.000000] vmalloc : 0xc8c00000 - 0xc9e00000 ( 18 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8c00000 ( 140 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] .text : 0xc0008000 - 0xc0e92cbc (14892 kB) [ 0.000000] .init : 0xc0f00000 - 0xc1019000 (1124 kB) [ 0.000000] .data : 0xc101a000 - 0xc108c2ec ( 457 kB) [ 0.000000] .bss : 0xc116b678 - 0xc133a184 (1851 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:921 [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Switching to timer-based delay loop [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000823] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500) [ 0.000885] pid_max: default: 32768 minimum: 301 [ 0.001068] Security Framework initialized [ 0.001129] SELinux: Initializing. [ 0.001220] SELinux: Starting in permissive mode [ 0.001342] Mount-cache hash table entries: 512 [ 0.002593] Initializing cgroup subsys debug [ 0.002624] Initializing cgroup subsys cpuacct [ 0.002655] Initializing cgroup subsys memory [ 0.002716] Initializing cgroup subsys freezer [ 0.002746] Initializing cgroup subsys bfqio [ 0.002838] CPU: Testing write buffer coherency: ok [ 0.003295] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003326] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available [ 0.003417] Setting up static identity map for 0x80dd48f8 - 0x80dd4980 [ 0.006622] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008636] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.010711] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.010925] Brought up 4 CPUs [ 0.010986] SMP: Total of 4 processors activated (54.00 BogoMIPS). [ 0.028167] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0 [ 0.028228] ------------[ cut here ]------------ [ 0.028289] WARNING: at ../../../../../../kernel/google/msm/fs/proc/generic.c:323 xlate_proc_name+0xb0/0xf0() [ 0.028320] name 'cpu/vfp_bounce' [ 0.028411] [] (unwind_backtrace+0x0/0x108) from [] (warn_slowpath_fmt+0x60/0x90) [ 0.028442] [] (warn_slowpath_fmt+0x60/0x90) from [] (xlate_proc_name+0xb0/0xf0) [ 0.028503] [] (xlate_proc_name+0xb0/0xf0) from [] (proc_create+0x5c/0x114) [ 0.028533] [] (__proc_create+0x5c/0x114) from [] (proc_create_data+0x4c/0xb4) [ 0.028594] [] (proc_create_data+0x4c/0xb4) from [] (vfp_init+0x1e0/0x258) [ 0.028656] [] (vfp_init+0x1e0/0x258) from [] (do_one_initcall+0xa4/0x1a4) [ 0.028686] [] (do_one_initcall+0xa4/0x1a4) from [] (kernel_init+0x144/0x224)[ 0.028747] [] (kernel_init+0x144/0x224) from [] (kernel_thread_exit+0x0/0x8)[ 0.028839] ---[ end trace 9c013f11c72e5534 ]--- [ 0.028869] Failed to create procfs node for VFP bounce reporting [ 0.030120] dummy: [ 0.031127] NET: Registered protocol family 16 [ 0.031982] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.032165] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver [ 0.034637] MIDR = 0x511f06f0 [ 0.034698] meminfo_init: smem ram ptable found: ver: 0 len: 5 [ 0.034729] Found 1 memory banks grouped into 8 memory regions [ 0.034973] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio [ 0.036346] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536 [ 0.036376] accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4 [ 0.036529] msm_rpm_init: RPM firmware 3.0.16842936 [ 0.058502] msm_rpm_get_status(): Status id 433 not defined for target [ 0.058532] msm_rpm_get_status(): Status id 433 not defined for target [ 0.058563] msm_rpm_get_status(): Status id 433 not defined for target [ 0.058593] msm_rpm_get_status(): Status id 433 not defined for target [ 0.058624] msm_rpm_get_status(): Status id 433 not defined for target [ 0.058654] msm_rpm_get_status(): Status id 433 not defined for target [ 0.058654] msm_rpm_get_status(): Status id 433 not defined for target [ 0.058685] msm_rpm_get_status(): Status id 433 not defined for target [ 0.077087] ASUSTek: Bypassing PCB_ID3 [ 0.077148] ASUSTek: PCBID=143 [ 0.078155] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en [ 0.078399] pm8921_probe: PMIC revision 1: F4 [ 0.078430] pm8921_probe: PMIC revision 2: 06 [ 0.078460] pm8921_probe: PMIC version: PM8921 rev 3.0 [ 0.078491] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press) [ 0.079864] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio [ 0.080444] pm_gpio_probe: OK: base=152, ngpio=44 [ 0.080749] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp [ 0.080841] pm8xxx_mpp_probe: OK: base=196, ngpio=12 [ 0.082763] pm8821_probe: PMIC revision 1: PM8821 rev F3 [ 0.082794] pm8821_probe: PMIC revision 2: PM8821 rev 0B [ 0.082824] pm8821_probe: PMIC version: PM8821 ver 2.1 [ 0.083496] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp [ 0.083557] pm8xxx_mpp_probe: OK: base=208, ngpio=4 [ 0.083862] gpio_vreg_probe: gpio_label required. [ 0.083923] msm-gpio-regulator: probe of msm-gpio-regulator.174 failed with error -22 [ 0.085144] saw_probe: id=0, name=8921_s5 [ 0.085540] saw_probe: id=1, name=8921_s6 [ 0.085937] saw_probe: id=2, name=8821_s0 [ 0.086334] saw_probe: id=3, name=8821_s1 [ 0.094573] Sensors:DSPS: initial dsps. [ 0.095550] [ELAN] Touch dirver register [ 0.095947] persistent_ram: found existing buffer, size 121917, start 121917 [ 0.435302] console [ram-1] enabled [ 0.435974] apq8064_init_fb: lcd_type=0 [ 0.436187] apq8064_init_fb: register mipi_JDI_panel_device [ 0.437561] msm_gpiomux_install: write failure: -22 [ 0.437744] msm_gpiomux_install: write failure: -22 [ 0.437835] msm_gpiomux_install: write failure: -22 [ 0.437988] msm_gpiomux_install: write failure: -22 [ 0.438110] msm_gpiomux_install: write failure: -22 [ 0.438262] msm_gpiomux_install: write failure: -22 [ 0.439208] Registering gpio keys [ 0.439300] Reconfigure VOL_UP(GPIO155) and VOL_DOWN(GPIO189) with PMIC [ 0.439605] 8921_l17: Failed to create debugfs directory [ 0.440429] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.440582] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.444274] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20 [ 0.444396] sps:BAM 0x12244000 is registered. [ 0.445068] sps:sps is ready. [ 0.476776] bio: create slab at 0 [ 0.477630] ION heap vmalloc created [ 0.477752] ION heap mm created at a0000000 with size 5c00000 [ 0.477874] ION heap mm_fw created at 9fe00000 with size 1e0000 [ 0.478057] ION heap mfc created at a5c00000 with size 2000 [ 0.478210] ION heap iommu created [ 0.478363] ION heap qsecom created at fe109000 with size 780000 [ 0.478546] ION heap audio created at fe889000 with size 4cf000 [ 0.478698] ION heap adsp created at 0 with size 800000 [ 0.480072] pm8xxx_pwm_probe: OK [ 0.480865] SCSI subsystem initialized [ 0.481292] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31 [ 0.481445] sps:BAM 0x28084000 is registered. [ 0.482574] usbcore: registered new interface driver usbfs [ 0.482910] usbcore: registered new interface driver hub [ 0.483154] usbcore: registered new device driver usb [ 0.483459] Linux media interface: v0.10 [ 0.483642] Linux video capture interface: v2.00 [ 0.484252] Registered led device: white [ 0.485015] apq8064_pm8921_pwm_init+ [ 0.485168] apq8064_pm8921_pwm_init- [ 0.485992] msm_iommu_dev: device vpe mapped at c9000000, with 2 ctx banks [ 0.486297] msm_iommu_dev: device mdp0 mapped at c9200000, with 2 ctx banks [ 0.486480] msm_iommu_dev: device mdp1 mapped at c9400000, with 2 ctx banks [ 0.486755] msm_iommu_dev: device rot mapped at c9600000, with 2 ctx banks [ 0.487030] msm_iommu_dev: device ijpeg mapped at c9800000, with 2 ctx banks [ 0.487243] msm_iommu_dev: device vfe mapped at c9a00000, with 2 ctx banks [ 0.487518] msm_iommu_dev: device vcodec_a mapped at c9c00000, with 2 ctx banks [ 0.487731] msm_iommu_dev: device vcodec_b mapped at cd800000, with 2 ctx banks [ 0.487945] msm_iommu_dev: device gfx3d mapped at cda00000, with 3 ctx banks [ 0.488220] msm_iommu_dev: device jpegd mapped at cdc00000, with 2 ctx banks [ 0.488433] msm_iommu_dev: device gfx3d1 mapped at cde00000, with 3 ctx banks [ 0.488708] msm_iommu_dev: device vcap mapped at ce000000, with 2 ctx banks [ 0.489318] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0 [ 0.489593] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1 [ 0.489959] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0 [ 0.490234] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1 [ 0.490600] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0 [ 0.490966] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1 [ 0.491241] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0 [ 0.491577] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1 [ 0.491912] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0 [ 0.492187] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1 [ 0.492553] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0 [ 0.492797] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1 [ 0.493164] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0 [ 0.493530] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1 [ 0.493835] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0 [ 0.494262] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0 [ 0.494598] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1 [ 0.494964] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0 [ 0.495300] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1 [ 0.495727] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0 [ 0.496124] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1 [ 0.496490] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0 [ 0.496765] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1 [ 0.497009] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.497772] Bluetooth: Core ver 2.16 [ 0.497985] NET: Registered protocol family 31 [ 0.498077] Bluetooth: HCI device and connection manager initialized [ 0.498260] Bluetooth: HCI socket layer initialized [ 0.498352] Bluetooth: L2CAP socket layer initialized [ 0.498779] Bluetooth: SCO socket layer initialized [ 0.499267] cfg80211: Calling CRDA to update world regulatory domain [ 0.499420] cfg80211: World regulatory domain updated: [ 0.499603] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.499786] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 0.499877] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 0.500030] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 0.500213] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 0.500305] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 0.501403] Switching to clocksource gp_timer [ 0.542114] NET: Registered protocol family 2 [ 0.542541] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.543182] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.544525] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.545257] TCP: Hash tables configured (established 131072 bind 65536) [ 0.545379] TCP: reno registered [ 0.545562] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.545684] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.546173] NET: Registered protocol family 1 [ 0.546813] RPC: Registered named UNIX socket transport module. [ 0.546997] RPC: Registered udp transport module. [ 0.547088] RPC: Registered tcp transport module. [ 0.547180] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.547668] Trying to unpack rootfs image as initramfs... [ 0.615570] Freeing initrd memory: 1008K [ 0.619628] Detected 9 counters on the L2CC PMU. [ 0.621246] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot [ 0.622802] pil_riva pil_riva: using secure boot [ 0.625183] pil_dsps pil_dsps: using secure boot [ 0.626373] pil_gss pil_gss: using secure boot [ 0.629150] smd_channel_probe_worker: allocation table not initialized [ 0.635437] msm_dsps driver version 4.03. [ 0.637145] NET: Registered protocol family 27 [ 0.640472] lpass_fatal_init: lpass SSR driver init'ed. [ 0.640777] wcnss_8960: module initialized [ 0.641143] gss_8064_init: gss fatal driver init'ed. [ 0.641815] acpuclk-8064 acpuclk-8064: SPEED BIN: 14 [ 0.641998] acpuclk-8064 acpuclk-8064: ACPU PVS: 3 [ 0.644500] acpuclk-8064 acpuclk-8064: CPU Frequencies Supported: 12 [ 0.646636] msm_rpm_log_probe: OK [ 0.649841] usbcore: registered new interface driver hsic_sysmon [ 0.651702] audit: initializing netlink socket (disabled) [ 0.651855] type=2000 audit(0.640:1): initialized [ 0.653594] highmem bounce pool size: 64 pages [ 0.661224] NFS: Registering the id_resolver key type [ 0.663360] fuse init (API version 7.18) [ 0.663818] SELinux: Registering netfilter hooks [ 0.667236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.667327] io scheduler noop registered (default) [ 0.667449] io scheduler deadline registered [ 0.667510] io scheduler row registered [ 0.667633] io scheduler cfq registered [ 0.667846] io scheduler bfq registered [ 0.667938] BFQ I/O-scheduler: v7r8 [ 0.669860] mipi_dsi base phy_addr = 0x4700000 virt = 0xce200000 [ 0.670013] mmss_sfpb base phy_addr = 0x5700000,virt = 0xc8c8e000 [ 0.670196] mipi_JDI_1080P_pt_init+ [ 0.670379] mipi_JDI_lcd_probe+ [ 0.670440] mipi_JDI_lcd_probe, hw_revision=0 [ 0.670562] mipi_JDI_lcd_probe, lcd_pwm_type=1 [ 0.670837] mipi_JDI_lcd_probe+ [ 0.670898] mipi_JDI_lcd_probe, hw_revision=0 [ 0.671020] mipi_JDI_lcd_probe, lcd_pwm_type=1 [ 0.671081] setting pdata->panel_info.fb_num to 3. type: 9 [ 0.671264] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed [ 0.680206] FrameBuffer[0] 1200x1920 size=28016640 bytes is registered successfully! [ 0.680603] Registered led device: lcd-backlight [ 0.680694] mipi_JDI_lcd_probe- [ 0.680755] mipi_JDI_1080P_pt_init- [ 0.681640] setting pdata->panel_info.fb_num to 1. type: 7 [ 0.682525] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully! [ 0.682830] mdp4_dtv_vsync_init: ndx=0 [ 0.683013] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group eab6c208 [ 0.683074] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD) [ 0.683105] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled

[ 0.684020] msm_vidc_enc: Inside vid_enc_init()

[ 0.684326] msm_vidc_enc: Inside vid_enc_vcd_init() [ 0.685424] msm_serial_hs module loaded [ 0.685699] msm_serial_hsl: detected port #1 [ 0.685882] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM [ 0.686126] msm_serial_hsl: detected port #0 [ 0.686248] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM [ 0.686523] msm_serial_hsl: driver initialized [ 0.687622] msm_rotator_probe: rotator_hw_revision=2 [ 0.689758] diagchar initialized now [ 0.690917] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU [ 0.696411] brd: module loaded [ 0.698547] loop: module loaded [ 0.699584] anx7808 init gpio [ 0.771820] sp_tx_hardware_poweron: anx7808 power on [ 0.772613] ANX7808 is found. [ 0.773864] 3.3V output disabled [ 0.831939] sp_tx_hardware_powerdown: anx7808 power down [ 0.832275] SP_TX To System State: [ 0.832489] STATE_CABLE_PLUG [ 0.833526] tabla-slim tabla-slim: Platform data from board file [ 0.992553] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6 [ 0.997161] tabla2x-slim tabla2x-slim: Platform data from board file [ 1.070404] wcd9xxx_check_codec_type: codec is tabla_codec [ 1.070617] wcd9xxx_check_codec_type: Read codec idbytes & version [ 1.070617] byte_0[00000002] byte_1[00000000] byte_2[00000000] [ 1.070648] byte_3[00000001] version = 2 [ 1.073303] i2c-core: driver [tabla-i2c-core] using legacy suspend method [ 1.073516] i2c-core: driver [tabla-i2c-core] using legacy resume method [ 1.075103] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver flags = 0 [ 1.075744] bcm2079x-i2c 0-0077: requesting IRQ 320 [ 1.076110] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully [ 1.077331] SCSI Media Changer driver v0.25 [ 1.078430] spi_qsd spi_qsd.0: master is unqueued, this is deprecated [ 1.081359] tun: Universal TUN/TAP device driver, 1.6 [ 1.081573] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 1.082214] rmnet_init: BAM devices[8] [ 1.104400] PPP generic driver version 2.4.2 [ 1.104553] PPP BSD Compression module registered [ 1.104644] PPP Deflate Compression module registered [ 1.105255] PPP MPPE Compression module registered [ 1.105377] NET: Registered protocol family 24 [ 1.105468] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 1.105560] CSLIP: code copyright 1989 Regents of the University of California. [ 1.105743] wcnss_wlan probed in built-in mode [ 1.106292] usbcore: registered new interface driver asix [ 1.106414] usbcore: registered new interface driver cdc_ether [ 1.106506] usbcore: registered new interface driver net1080 [ 1.106628] usbcore: registered new interface driver cdc_subset [ 1.106719] usbcore: registered new interface driver zaurus [ 1.107025] usbcore: registered new interface driver cdc_ncm [ 1.107391] smb345_probe+ [ 1.110656] smb345_charger: [smb345_inok_irq] GPIO pin irq 311 requested ok, smb345_INOK = H [ 1.110839] smb345_charger: [smb345_wireless_irq] GPIO pin irq 322 requested ok, wpc_pok = H [ 1.110961] smb345_charger: [smb345_wireless_en_config] GPIO pin 179, 183 requested ok, wpc_en1 = L, wpc_en2 = L [ 1.111083] smb345_probe- [ 1.111175] i2c-core: driver [smb345] using legacy suspend method [ 1.111236] i2c-core: driver [smb345] using legacy resume method [ 1.111389] bq27541_probe + client->addr= 55 [ 1.112457] bq27541_get_psp status: Not charging ret= 0x0201 [ 1.113433] bq27541_get_psp voltage_now= 4178000 uV [ 1.114349] bq27541_get_capacity = 98% ret= 97 [ 1.115325] bq27541_get_psp temperature= 283 (0.1\xffffffa2XC) [ 1.117095] bq27541_get_psp current = -448 mA [ 1.118133] bq27541_get_psp status: Not charging ret= 0x0201 [ 1.119049] bq27541_get_psp status: Not charging ret= 0x0201 [ 1.119659] setup_low_battery_irq irq=317, LL_BAT_T30=1 [ 1.119750] bq27541_probe - bq27541-battery driver registered [ 1.119842] i2c-core: driver [bq27541-battery] using legacy suspend method [ 1.119934] i2c-core: driver [bq27541-battery] using legacy resume method [ 1.120147] bq27541_get_psp voltage_now= 4178000 uV [ 1.120727] msm_otg msm_otg: msm_otg probe [ 1.120819] msm_otg msm_otg: failed to get phy_clk [ 1.121063] bq27541_get_capacity = 98% ret= 97 [ 1.121582] msm_otg msm_otg: OTG regs = c8ca6000 [ 1.121978] bq27541_get_psp temperature= 283 (0.1\xffffffa2XC) [ 1.123809] bq27541_get_psp current = -448 mA [ 1.124420] msm_otg msm_otg: PMIC IRQ for ID notifications doesn't exist [ 1.124633] gpio 23 request failed [ 1.124725] msm_otg_acok_init: GPIO pin irq 311 requested ok, msm_otg_ACOK = H [ 1.124969] gpio 77 request failed [ 1.125091] msm_otg_id_pin_init: GPIO pin irq 365 requested ok, msm_otg_id_pin = H [ 1.125457] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.126068] usbcore: registered new interface driver cdc_acm [ 1.126159] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.126251] Initializing USB Mass Storage driver... [ 1.126342] usbcore: registered new interface driver usb-storage [ 1.126464] USB Mass Storage support registered. [ 1.126556] usbcore: registered new interface driver ums-alauda [ 1.126678] usbcore: registered new interface driver ums-cypress [ 1.126770] usbcore: registered new interface driver ums-datafab [ 1.126892] usbcore: registered new interface driver ums-freecom [ 1.126983] usbcore: registered new interface driver ums-isd200 [ 1.127105] usbcore: registered new interface driver ums-jumpshot [ 1.127197] usbcore: registered new interface driver ums-karma [ 1.127319] usbcore: registered new interface driver ums-onetouch [ 1.127410] usbcore: registered new interface driver ums-sddr09 [ 1.127532] usbcore: registered new interface driver ums-sddr55 [ 1.127624] usbcore: registered new interface driver ums-usbat [ 1.127807] usbcore: registered new interface driver usbserial [ 1.127929] usbserial: USB Serial Driver core [ 1.128021] usbcore: registered new interface driver qc_csvt [ 1.128112] USB Serial support registered for qc_csvt [ 1.128234] usbcore: registered new interface driver usb_ehset_test [ 1.128326] usbcore: registered new interface driver diag_bridge [ 1.128662] usbcore: registered new interface driver mdm_bridge [ 1.129364] usbcore: registered new interface driver ks_bridge [ 1.129455] ksb_init: init done [ 1.129730] msm_otg msm_otg: phy_reset: success [ 1.130310] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32 [ 1.130493] mbim_init: initialize 1 instances [ 1.130706] mbim_init: Initialized 1 ports [ 1.131896] rndis_qc_init: initialize rndis QC instance [ 1.132263] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 1.132385] android_usb gadget: Number of LUNs=1 [ 1.132446] lun0: LUN: removable file: (no medium) [ 1.132781] android_usb gadget: android_usb ready [ 1.133361] mousedev: PS/2 mouse device common for all mice [ 1.133911] usbcore: registered new interface driver xpad [ 1.133972] [ektf3k]:[elan] elan_ktf3k_ts_init [ 1.134246] [ektf3k]:[ELAN] Start HW reset! [ 1.232055] [usb_otg] switch to peripheral mode by default (boot) [ 1.392456] [ektf3k]:[elan]detect intr=>Old FW [ 1.392639] [ektf3k]:The boot code is old! [ 1.422424] [ektf3k]:[elan] hello_packet_handler: hello packet 55:55:55:55 [ 1.422790] [ektf3k]:[elan] hello packet's rc = 0 [ 1.632629] notifying plugin [ 1.635009] [ektf3k]:[elan] fw_packet_handler: firmware version: 0xa044 [ 1.635620] msm_otg msm_otg: USB in low power mode [ 1.637329] [ektf3k]:[elan] fw_packet_handler: X resolution: 0x007e [ 1.639587] [ektf3k]:[elan] fw_packet_handler: Y resolution: 0x00d2 [ 1.641998] [ektf3k]:[elan] fw_packet_handler: firmware id: 0x3029 [ 1.644317] [ektf3k]:[elan] fw_packet_handler: boot code id: 0x6047 [ 1.644683] [ektf3k]:[Elan] Max X=2239, Max Y=1343 [ 1.645263] input: elan-touchscreen as /devices/virtual/input/input0 [ 1.646026] [ektf3k]:The firmware was version 0xA044 and id:0x3029 [ 1.646301] [ektf3k]: /proc/ektf_dbg created [ 1.647277] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode [ 1.647674] [ektf3k]:[ELAN]misc_register finished!! [ 1.648010] elan-ktf3k 3-0010: Update power source to 0 [ 1.664337] lis3dh_acc accelerometer driver: init [ 1.664764] i2c-core: driver [lis3dh_acc] using legacy suspend method [ 1.664947] i2c-core: driver [lis3dh_acc] using legacy resume method [ 1.665710] ASUSTek: lid_driver_probe [ 1.666259] input: lid_input as /devices/virtual/input/input1 [ 1.669342] using rtc device, pm8xxx_rtc, for alarms [ 1.669586] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 [ 1.670715] i2c /dev entries driver [ 1.676971] ov5693_init_module:105 [ 1.677642] ov5693_init_module:110 rc -19 [ 1.712951] gpio 25 VCM_PD(1) [ 1.713195] gpio 31 XSHUTDN(1) [ 1.777954] mi1040_init_module:323 [ 1.778686] mi1040_init_module:329 rc -19 [ 1.952301] gpio 43 CAM_RST(1) [ 2.012268] mi1040_sensor_match_id +++ [ 2.013153] Sensor id: 0x2481 [ 2.013519] PMIC gpio 11 CAM_VENDOR_1(1) [ 2.013732] PMIC gpio 10 CAM_VENDOR_0(0) [ 2.013946] PMIC gpio 24 CAM_LENS(1) [ 2.014282] Vendor is A [ 2.014465] mi1040_sensor_match_id --- [ 2.255950] lirc_dev: IR Remote Control driver registered, major 236 [ 2.256317] IR NEC protocol handler initialized [ 2.256500] IR RC5(x) protocol handler initialized [ 2.256835] IR RC6 protocol handler initialized [ 2.257019] IR JVC protocol handler initialized [ 2.257232] IR Sony protocol handler initialized [ 2.257537] IR RC5 (streamzap) protocol handler initialized [ 2.257751] IR SANYO protocol handler initialized [ 2.258087] IR MCE Keyboard/mouse protocol handler initialized [ 2.258270] IR LIRC bridge handler initialized [ 2.259490] gspca_main: v2.14.0 registered [ 2.260253] usbcore: registered new interface driver uvcvideo [ 2.260589] USB Video Class driver (1.1.1) [ 2.263427] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517 [ 2.264007] CAP1106: [cap1106_init] [ 2.264099] i2c-core: driver [cap1106] using legacy suspend method [ 2.264160] i2c-core: driver [cap1106] using legacy resume method [ 2.287292] pm8xxx_tm_probe: OK [ 2.287658] pm8xxx_tm_probe: OK [ 2.288208] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.289581] cpuidle: using governor ladder [ 2.289703] cpuidle: using governor menu [ 2.290466] mmc0: SDCC Version: 0x06000018 [ 2.291625] mmc0: bam physical base=0x12402000 [ 2.291748] mmc0: bam virtual base=0xc8cb0000 [ 2.291809] sps:BAM 0x12402000 is registered. [ 2.291870] mmc0: BAM device registered. bam_handle=0xea637600 [ 2.292114] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6 [ 2.292449] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130 [ 2.292633] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800 [ 2.292785] mmc0: No card detect facilities available [ 2.295104] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1 [ 2.295227] mmc0: Controller capabilities: 0x0000039a [ 2.295288] mmc0: 8 bit data mode enabled [ 2.295410] mmc0: 4 bit data mode disabled [ 2.295471] mmc0: polling status mode disabled [ 2.295532] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz [ 2.295654] mmc0: Slot eject status = 0 [ 2.295715] mmc0: Power save feature enable = 1 [ 2.295837] mmc0: SPS-BAM data transfer mode available [ 2.297485] usbcore: registered new interface driver usbhid [ 2.297546] usbhid: USB HID core driver [ 2.297668] zram: num_devices not specified. Using default: 1 [ 2.297760] zram: Creating 1 devices ... [ 2.298706] ashmem: initialized [ 2.299194] usbcore: registered new interface driver snd-usb-audio [ 2.300109] tabla_probe [ 2.301086] msm_pcm_probe: dev name msm-voip-dsp [ 2.301330] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8 [ 2.301452] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8 [ 2.302276] msm_pcm_probe: dev name msm-pcm-dsp [ 2.302703] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp [ 2.303009] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp [ 2.303100] adding pm_qos request in low latency driver [ 2.303222] done adding pm_qos request in low latency driver [ 2.303833] msm_compr_probe: dev name msm-compr-dsp [ 2.304321] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa [ 2.305023] msm8930_audio_init: Not the right machine type [ 2.305145] msm_audio_init: Not the right machine type [ 2.305206] msm_audio_init: Not APQ8064 in I2S mode [ 2.407775] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok [ 2.408569] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok [ 2.409332] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok [ 2.410064] asoc: snd-soc-dummy-dai <-> VoIP mapping ok [ 2.410827] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok [ 2.411560] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok [ 2.412567] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok [ 2.413146] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok [ 2.413818] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok [ 2.414550] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok [ 2.415344] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok [ 2.416046] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok [ 2.416839] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok [ 2.417572] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok [ 2.418365] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok [ 2.419403] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok [ 2.421783] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok [ 2.422546] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok [ 2.423278] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok [ 2.423950] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok [ 2.424682] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok [ 2.425384] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok [ 2.426208] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok [ 2.427001] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok [ 2.427703] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok [ 2.428344] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok [ 2.429046] asoc: tabla_rx2 <-> msm-dai-stub mapping ok [ 2.429748] asoc: tabla_tx1 <-> msm-dai-stub mapping ok [ 2.430450] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok [ 2.431304] mmc0: new HS200 MMC card at address 0001 [ 2.431884] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok [ 2.431915] mmcblk0: mmc0:0001 HBG4e 29.1 GiB [ 2.432464] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok [ 2.432891] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok [ 2.433288] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok [ 2.433685] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok [ 2.434082] asoc: tabla_tx3 <-> msm-dai-stub mapping ok [ 2.434692] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok [ 2.435638] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok [ 2.438232] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input2 [ 2.438568] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input3 [ 2.439697] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 [ 2.441253] headset_init+ ##### [ 2.441986] input: h2w button as /devices/virtual/input/input4 [ 2.442413] HEADSET: Headset detection mode [ 2.502410] set_hs_micbias badgap status: OFF power down bandgap [ 2.502624] headset_init- ##### [ 2.502746] u32 classifier [ 2.502838] Actions configured [ 2.502899] Netfilter messages via NETLINK v0.30. [ 2.503051] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.503479] ctnetlink v0.93: registering with nfnetlink. [ 2.503631] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 2.503692] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 2.504028] xt_time: kernel timezone is -0000 [ 2.504364] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.504669] arp_tables: (C) 2002 David S. Miller [ 2.504760] TCP: cubic registered [ 2.505218] NET: Registered protocol family 10 [ 2.507110] Mobile IPv6 [ 2.507202] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.507415] IPv6 over IPv4 tunneling driver [ 2.507873] NET: Registered protocol family 17 [ 2.507965] NET: Registered protocol family 15 [ 2.508117] Bridge firewalling registered [ 2.508178] Ebtables v2.0 registered [ 2.508514] Bluetooth: RFCOMM TTY layer initialized [ 2.508636] Bluetooth: RFCOMM socket layer initialized [ 2.508697] Bluetooth: RFCOMM ver 1.11 [ 2.508819] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.508880] Bluetooth: BNEP filters: protocol multicast [ 2.509002] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.509155] L2TP core driver, V2.0 [ 2.509216] PPPoL2TP kernel driver, V2.0 [ 2.509338] Registering the dns_resolver key type [ 2.509826] Registering SWP/SWPB emulation handler [ 2.509918] clock_late_init: Removing enables held for handed-off clocks [ 2.515075] MSM Watchdog Initialized [ 2.527160] input: gpio-keys as /devices/platform/gpio-keys.0/input/input5 [ 2.527679] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2016-12-15 17:24:09 UTC (1481822649) [ 2.529205] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22 [ 2.529602] Unable to register core for 0 [ 2.529815] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22 [ 2.530609] ALSA device list: [ 2.530792] #0: apq8064-tabla-snd-card [ 2.531524] Freeing init memory: 100K [ 2.536560] init: init started! [ 2.544891] SELinux: 2048 avtab hash slots, 9253 rules. [ 2.544921] SELinux: Android master kernel running Android M policy in compatibility mode. [ 2.550415] SELinux: 2048 avtab hash slots, 9253 rules. [ 2.550445] SELinux: 1 users, 2 roles, 625 types, 0 bools, 1 sens, 1024 cats [ 2.550476] SELinux: 87 classes, 9253 rules [ 2.551452] SELinux: Completing initialization. [ 2.551483] SELinux: Setting up existing superblocks. [ 2.551513] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 2.551513] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 2.551666] SELinux: initialized (dev bdev, type bdev), not configured for labeling [ 2.551666] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 2.551727] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 2.551757] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 2.563629] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 2.563659] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 2.563659] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling [ 2.563690] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 2.563751] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 2.563873] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 2.563903] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 2.580383] type=1403 audit(1481822649.540:2): policy loaded auid=4294967295 ses=4294967295 [ 2.580963] type=1404 audit(1481822649.540:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 2.582672] init: (Initializing SELinux enforcing took 0.05s.) [ 2.595428] init: init second stage started! [ 2.690765] init: waitpid failed: No child processes [ 2.691284] init: (Loading properties from /default.prop took 0.00s.) [ 2.693725] init: (Parsing /init.environ.rc took 0.00s.) [ 2.694152] init: (Parsing /init.usb.rc took 0.00s.) [ 2.695312] init: (Parsing init.flo.usb.rc took 0.00s.) [ 2.695434] init: (Parsing init.flo.diag.rc took 0.00s.) [ 2.695709] init: (Parsing init.flo.power.rc took 0.00s.) [ 2.695800] init: (Parsing /init.flo.rc took 0.00s.) [ 2.696350] init: (Parsing /init.usb.configfs.rc took 0.00s.) [ 2.696502] init: (Parsing /init.zygote32.rc took 0.00s.) [ 2.696746] init: (Parsing /init.trace.rc took 0.00s.) [ 2.696929] init: (Parsing init.supersu.rc took 0.00s.) [ 2.697570] init: (Parsing /init.superuser.rc took 0.00s.) [ 2.697662] init: (Parsing /init.cm.rc took 0.00s.) [ 2.697784] init: (Parsing /init.rc took 0.01s.) [ 2.698059] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory. [ 2.698394] init: Starting service 'ueventd'... [ 2.699035] init: Waiting for /dev/.coldboot_done... [ 2.704498] ueventd: ueventd started! [ 2.727447] bq27541_get_psp status: Not charging ret= 0x0201 [ 2.728729] bq27541_get_psp voltage_now= 4175000 uV [ 2.729858] bq27541_get_capacity = 98% ret= 97 [ 2.730987] bq27541_get_psp temperature= 284 (0.1\xffffffa2XC) [ 2.733215] bq27541_get_psp current = -433 mA [ 3.136322] ueventd: Coldboot took 0.42s. [ 3.136718] init: Waiting for /dev/.coldboot_done took 0.44s. [ 3.237731] keychord: using input dev gpio-keys for fevent [ 3.239166] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.239593] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.240295] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.241973] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.245697] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory [ 3.245941] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory [ 3.246093] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory [ 3.246246] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory [ 3.246398] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory [ 3.248229] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.248413] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument [ 3.251586] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory [ 3.312774] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 3.341796] EXT4-fs (mmcblk0p22): mounted filesystem without journal. Opts: barrier=1 [ 3.342102] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr [ 3.342834] fs_mgr: mount(source=/dev/block/platform/msm_sdcc.1/by-name/system,target=/system,type=ext4)=0 [ 3.356658] F2FS-fs (mmcblk0p23): Magic Mismatch, valid(0xf2f52010) - read(0x8c00) [ 3.357025] F2FS-fs (mmcblk0p23): Can't find valid F2FS filesystem in 1th superblock [ 3.357849] F2FS-fs (mmcblk0p23): Magic Mismatch, valid(0xf2f52010) - read(0x0) [ 3.358215] F2FS-fs (mmcblk0p23): Can't find valid F2FS filesystem in 2th superblock [ 3.358581] F2FS-fs (mmcblk0p23): Magic Mismatch, valid(0xf2f52010) - read(0x8c00) [ 3.358795] F2FS-fs (mmcblk0p23): Can't find valid F2FS filesystem in 1th superblock [ 3.359008] F2FS-fs (mmcblk0p23): Magic Mismatch, valid(0xf2f52010) - read(0x0) [ 3.359344] F2FS-fs (mmcblk0p23): Can't find valid F2FS filesystem in 2th superblock [ 3.360321] fs_mgr: mount(source=/dev/block/platform/msm_sdcc.1/by-name/cache,target=/cache,type=f2fs)=-1 [ 3.502471] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro [ 3.503265] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr [ 3.503540] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/cache,/cache,ext4)=0: Success [ 3.512817] fs_mgr: check_fs(): unmount(/cache) succeeded [ 3.513702] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache [ 3.639556] e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[ 3.640167] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/cache: clean, 20/35840 files, 4693/143360 blocks

[ 3.646636] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=panic [ 3.647003] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr [ 3.647216] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/cache,target=/cache,type=ext4)=0 [ 3.647613] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-name/cache on /cache with fs_type=ext4 instead of f2fs [ 3.662170] F2FS-fs (mmcblk0p30): Magic Mismatch, valid(0xf2f52010) - read(0x1ae000) [ 3.662536] F2FS-fs (mmcblk0p30): Can't find valid F2FS filesystem in 1th superblock [ 3.663360] F2FS-fs (mmcblk0p30): Magic Mismatch, valid(0xf2f52010) - read(0x100000) [ 3.663696] F2FS-fs (mmcblk0p30): Can't find valid F2FS filesystem in 2th superblock [ 3.664031] F2FS-fs (mmcblk0p30): Magic Mismatch, valid(0xf2f52010) - read(0x1ae000) [ 3.664245] F2FS-fs (mmcblk0p30): Can't find valid F2FS filesystem in 1th superblock [ 3.664581] F2FS-fs (mmcblk0p30): Magic Mismatch, valid(0xf2f52010) - read(0x100000) [ 3.664916] F2FS-fs (mmcblk0p30): Can't find valid F2FS filesystem in 2th superblock [ 3.672943] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/userdata,target=/data,type=f2fs)=-1 [ 3.698577] EXT4-fs (mmcblk0p30): ext4_orphan_cleanup: deleting unreferenced inode 139320 [ 3.699645] EXT4-fs (mmcblk0p30): ext4_orphan_cleanup: deleting unreferenced inode 139327 [ 3.700775] EXT4-fs (mmcblk0p30): 2 orphan inodes deleted [ 3.701080] EXT4-fs (mmcblk0p30): recovery complete [ 3.712860] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro [ 3.713226] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr [ 3.713409] fs_mgr: check_fs(): mount(/dev/block/platform/msm_sdcc.1/by-name/userdata,/data,ext4)=0: Success [ 3.723266] fs_mgr: check_fs(): unmount(/data) succeeded [ 3.723693] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata[ 3.795715] e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[ 3.796295] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 242923/1761280 files, 2264937/7045115 blocks

[ 3.804718] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=panic [ 3.805084] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr [ 3.805267] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/userdata,target=/data,type=ext4)=0 [ 3.805633] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/msm_sdcc.1/by-name/userdata on /data with fs_type=ext4 instead of f2fs [ 3.814483] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc [ 3.814849] SELinux: initialized (dev mmcblk0p4, type ext4), uses xattr [ 3.815032] fs_mgr: __mount(source=/dev/block/platform/msm_sdcc.1/by-name/persist,target=/persist,type=ext4)=0 [ 3.824554] adsp_boot_store:going to call adsp_loader_do [ 4.170318] pil pil0: q6: Brought out of reset [ 4.200927] diag: In diag_process_smd_cntl_read_data, Invalid Msg type 12 proc 1 [ 4.223327] apr_tal:Q6 Is Up [ 4.230316] diag: proc 1, msg mask update fail -12, tried 419 [ 4.273345] adsp_loader_do: Q6/ADSP image is loaded [ 4.278442] init: Starting service 'logd'... [ 4.330505] init: (Loading properties from /system/build.prop took 0.02s.) [ 4.330718] init: (Loading properties from /vendor/build.prop took 0.00s.) [ 4.330841] init: (Loading properties from /factory/factory.prop took 0.00s.) [ 4.335540] init: Starting service 'vold'... [ 4.337860] init: Not bootcharting. [ 4.370849] logd.auditd: start [ 4.370971] logd.klogd: 4368024075 [ 16.163970] bq27541_get_psp status: Not charging ret= 0x0201 [ 16.165039] bq27541_get_psp status: Not charging ret= 0x0201 [ 16.165863] bq27541_get_psp voltage_now= 4173000 uV [ 16.166778] bq27541_get_capacity = 98% ret= 97 [ 16.167572] bq27541_get_psp temperature= 284 (0.1\xffffffa2XC) [ 16.169036] bq27541_get_psp current = -483 mA [ 33.127929] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'... [ 33.168579] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 207) exited with status 0 [ 33.169586] wcnss_8960: Subsystem restart activated for riva. [ 33.176605] init: write_file: Unable to open '/sys/class/timed_output/vibrator/amp': No such file or directory [ 33.177612] init: Warning! Service exec 1 (/sbin/launch_daemonsu.sh) needs a SELinux domain defined; please fix! [ 33.177703] init: Starting service 'exec 1 (/sbin/launch_daemonsu.sh)'... [ 33.529113] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 33.529266] SELinux: initialized (dev loop0, type ext4), uses xattr [ 33.730102] warning: `daemonsu' uses 32-bit capabilities (legacy support in use) [ 34.415283] SELinux: 2048 avtab hash slots, 9253 rules. [ 34.420959] SELinux: 2048 avtab hash slots, 9253 rules. [ 34.420989] SELinux: 1 users, 2 roles, 625 types, 0 bools, 1 sens, 1024 cats [ 34.420989] SELinux: 87 classes, 9253 rules [ 34.574890] type=1403 audit(1481822681.530:4): policy loaded auid=4294967295 ses=4294967295 [ 34.687316] init: Untracked pid 278 exited with status 0 [ 34.698822] init: Service 'exec 1 (/sbin/launch_daemonsu.sh)' (pid 208) exited with status 0 [ 34.699005] init: Starting service 'exec 2 (/sbin/launch_daemonsu.sh)'... [ 34.862548] type=1400 audit(1481822681.810:5): avc: denied { getattr } for pid=297 comm="ps" path="/proc/195" dev="proc" ino=6153 scontext=u:r:init:s0 tcontext=u:r:logd:s0 tclass=dir permissive=1 [ 34.869812] init: Service 'exec 2 (/sbin/launch_daemonsu.sh)' (pid 285) exited with status 0 [ 34.871337] init: Starting service 'sysinit'... [ 34.872253] init: (Loading properties from /data/local.prop took 0.00s.) [ 34.915649] init: Starting service 'logd-reinit'... [ 34.921356] init: Starting service 'healthd'... [ 34.922332] init: Starting service 'lmkd'... [ 34.923767] init: Starting service 'servicemanager'... [ 34.924530] binder: 304:304 transaction failed 29189, size 0-0 [ 34.924774] init: Starting service 'surfaceflinger'... [ 34.925720] init: Starting service 'ks_checker'... [ 34.929534] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory [ 34.929748] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory [ 34.929901] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory [ 34.930084] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory [ 34.930267] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory [ 34.930450] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory [ 34.930603] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory [ 34.930786] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory [ 34.931854] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead [ 34.932098] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead [ 34.932312] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead [ 34.937774] init: SELinux: Could not get canonical path /sys/block/sda/queue/scheduler restorecon: No such file or directory. [ 34.938018] init: SELinux: Could not get canonical path /sys/block/sde/queue/scheduler restorecon: No such file or directory. [ 34.938232] init: SELinux: Could not get canonical path /sys/block/dm-0/queue/scheduler restorecon: No such file or directory. [ 34.940612] init: Starting service 'console'... [ 34.942077] init: Starting service 'netd'... [ 34.942932] init: Starting service 'debuggerd'... [ 34.950195] logd.daemon: reinit [ 34.953430] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64' [ 34.953979] init: Starting service 'drm'... [ 34.954925] init: Starting service 'media'... [ 34.955780] init: Starting service 'installd'... [ 34.956695] init: Starting service 'keystore'... [ 34.957580] init: Starting service 'irsc_util'... [ 34.958648] init: Starting service 'rmt_storage'... [ 34.959655] init: Starting service 'bridgemgrd'... [ 34.960723] init: Starting service 'thermald'... [ 34.961669] init: Starting service 'bdAddrLoader'... [ 34.965423] init: Starting service 'zygote'... [ 34.983764] init: Service 'logd-reinit' (pid 302) exited with status 0 [ 34.984710] init: Starting service 'gatekeeperd'... [ 34.985748] init: Starting service 'perfprofd'... [ 34.986694] init: Starting service 'sensors'... [ 34.987701] init: Starting service 'mpdecision'... [ 34.988677] init: Starting service 'qcamerasvr'... [ 34.989624] init: Starting service 'wcnss_init'... [ 34.990600] init: Starting service 'qseecomd'... [ 34.991241] init: Starting service 'daemonsu'... [ 34.992126] init: Starting service 'su_daemon'... [ 35.019653] init: write_file: Unable to write to '/sys/devices/system/cpu/cpu1/online': Invalid argument [ 35.019897] init: write_file: Unable to write to '/sys/devices/system/cpu/cpu2/online': Invalid argument [ 35.020141] init: write_file: Unable to write to '/sys/devices/system/cpu/cpu3/online': Invalid argument [ 35.021026] enable_store: android_usb: already disabled [ 35.021667] mtp_bind_config [ 35.037017] init: Service 'irsc_util' (pid 318) exited with status 0 [ 35.108703] init: Service 'bdAddrLoader' (pid 322) exited with status 1 [ 35.278533] msm_thermal: enabled = 0 [ 35.286041] init: Untracked pid 370 exited with status 1 [ 35.286224] init: Service 'su_daemon' (pid 335) exited with status 0 [ 35.286376] init: Service 'su_daemon' (pid 335) killing any children in process group [ 35.298126] init: Service 'ks_checker' (pid 308) exited with status 0 [ 35.361511] QSEECOM: qseecom_load_app: App (keymaster) does'nt exist, loading apps for first time[ 35.382415] QSEECOM: qseecom_load_app: App with id 1 (keymaster) now loaded [ 35.478607] type=1400 audit(1481822682.431:6): avc: denied { getattr } for pid=418 comm="ps" path="/proc/195" dev="proc" ino=6153 scontext=u:r:init:s0 tcontext=u:r:logd:s0 tclass=dir permissive=1 [ 35.497741] init: Service 'daemonsu' (pid 333) exited with status 0 [ 35.508209] wcnss_wlan wcnss_node_write: triggered by userspace [ 35.535797] pil pil3: dsps: Brought out of reset [ 35.713348] init: Service 'sysinit' (pid 300) exited with status 0 [ 35.834106] pil pil1: wcnss: Brought out of reset [ 35.835235] init: Service 'wcnss_init' (pid 331) exited with status 0 [ 35.925445] healthd: wakealarm_init: timerfd_create failed [ 35.927673] bq27541_get_capacity = 98% ret= 97 [ 35.928375] bq27541_get_psp voltage_now= 4158000 uV [ 35.929077] bq27541_get_psp temperature= 283 (0.1\xffffffa2XC) [ 35.929809] bq27541_get_psp status: Not charging ret= 0x0201 [ 35.995513] mipi_dsi_panel_power+, on=1 [ 36.045593] mipi_dsi_panel_power- [ 36.051422] mipi_JDI_lcd_on+ [ 36.051452] mipi_JDI_lcd_on-, booting [ 36.055084] mdp4_calc_req_mdp_clk: src_h is zero! [ 36.056518] EXT_COMMON: hdmi_common_wta_hpd: '0' (unchanged) [ 36.089935] init: Starting service 'bootanim'... [ 36.091461] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1 [ 36.193145] EXT_COMMON: hdmi_common_wta_hpd: '1' [ 36.276092] gpio 25 VCM_PD(1) [ 36.276214] gpio 31 XSHUTDN(1) [ 36.292755] wcnss_wlan_ctrl_probe: SMD ctrl channel up [ 36.294372] wcnss: version 01040102 [ 36.294464] wcnss: schedule dnld work for riva [ 36.298706] wcnss: NV bin size: 29772, total_fragments: 10 [ 36.298858] wcnss: no space available for smd frame [ 36.303863] msm_sensor_config:1422 sensor state 1 [ 36.323181] wcnss: no space available for smd frame [ 36.353149] wcnss: no space available for smd frame [ 36.383148] wcnss: no space available for smd frame [ 36.421722] wcnss: received WCNSS_NVBIN_DNLD_RSP from ccpu [ 36.450103] msm_actuator_config:947 msm_actuator_power_down failed -14 [ 36.486938] msm_sensor_config:1445 sensor state 0 [ 36.683349] gpio 43 CAM_RST(1) [ 36.743286] mi1040_sensor_match_id +++ [ 36.745086] Sensor id: 0x2481 [ 36.745300] PMIC gpio 11 CAM_VENDOR_1(1) [ 36.745635] PMIC gpio 10 CAM_VENDOR_0(0) [ 36.745880] PMIC gpio 24 CAM_LENS(1) [ 36.746063] Vendor is A [ 36.746368] mi1040_sensor_match_id --- [ 36.904418] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 266667000 [ 39.093231] init: Starting service 'su_daemon'... [ 39.119689] init: Service 'su_daemon' (pid 635) exited with status 0 [ 39.119842] init: Service 'su_daemon' (pid 635) killing any children in process group [ 39.122039] init: Untracked pid 639 exited with status 1 [ 41.293457] request_suspend_state: wakeup (3->0) at 41290351340 (2016-12-15 17:24:48.254770337 UTC) [ 41.453765] mipi_JDI_set_backlight: pwm enable [ 44.823822] init: Starting service 'su_daemon'... [ 44.855163] init: Untracked pid 803 exited with status 1 [ 44.855377] init: Service 'su_daemon' (pid 801) exited with status 0 [ 44.855468] init: Service 'su_daemon' (pid 801) killing any children in process group [ 46.303192] wcnss_post_bootup: Cancel APPS vote for Iris & Riva [ 49.861083] init: Starting service 'su_daemon'... [ 49.911712] init: Service 'su_daemon' (pid 811) exited with status 0 [ 49.911895] init: Service 'su_daemon' (pid 811) killing any children in process group [ 49.912719] init: Untracked pid 813 exited with status 1 [ 50.073120] dummy0: no IPv6 routers present [ 53.715850] bq27541_get_capacity = 98% ret= 97 [ 53.716674] bq27541_get_psp voltage_now= 4132000 uV [ 53.717437] bq27541_get_psp temperature= 283 (0.1\xffffffa2XC) [ 53.718139] bq27541_get_psp status: Not charging ret= 0x0201 [ 54.148010] lowmem_shrink: convert oom_adj to oom_score_adj: [ 54.148376] oom_adj 0 => oom_score_adj 0 [ 54.148620] oom_adj 1 => oom_score_adj 58 [ 54.148986] oom_adj 2 => oom_score_adj 117 [ 54.149169] oom_adj 3 => oom_score_adj 176 [ 54.149383] oom_adj 9 => oom_score_adj 529 [ 54.149719] oom_adj 15 => oom_score_adj 1000 [ 54.152099] init: Starting service 'su_daemon'... [ 54.182495] init: Service 'su_daemon' (pid 845) exited with status 0 [ 54.182617] init: Service 'su_daemon' (pid 845) killing any children in process group [ 54.184936] init: Untracked pid 847 exited with status 1 [ 54.713012] init: Service 'bootanim' (pid 481) exited with status 0 [ 54.858520] pm8xxx-led pm8xxx-led: resume white set 0 [ 56.113311] acc_open [ 56.113403] acc_release [ 56.362854] type=1400 audit(1481822703.311:7): avc: denied { search } for pid=719 comm="system_server" name="/" dev="mmcblk0p4" ino=2 scontext=u:r:system_server:s0 tcontext=u:object_r:persist_file:s0 tclass=dir permissive=0 [ 56.367462] type=1400 audit(1481822703.321:8): avc: denied { search } for pid=719 comm="system_server" name="/" dev="mmcblk0p4" ino=2 scontext=u:r:system_server:s0 tcontext=u:object_r:persist_file:s0 tclass=dir permissive=0 [ 56.539245] NOHZ: local_softirq_pending 200 [ 57.015045] wlan: loading driver v3.2.3.23 [ 57.049926] DefaultCountry is WS [ 57.129089] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 57.130218] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 57.131042] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 57.364379] wlan: WCNSS WLAN version 1.4.1.2 [ 57.364501] wlan: WCNSS software version 201080 [ 57.364562] wlan: WCNSS hardware version WCN v2.0 RadioPhy vIris_TSMC_2.0 with 48MHz XO [ 57.364776] DefaultCountry is WS [ 57.374938] wlan: driver loaded [ 57.789428] msm_vidc_venc: Inside vid_enc_open()

[ 57.789550] msm_vidc_enc: Inside vid_enc_open_client()

[ 57.789733] res_trk_download_firmware(): Request firmware download

[ 57.804504] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801

[ 57.824157] : fw_version 9:23:2014

[ 57.825256] msm_vidc_enc: Inside vid_enc_release()

[ 57.825469] msm_vidc_enc: Inside vid_enc_close_client()

[ 57.849548] msm_vidc_enc: Return from vid_enc_release() [ 57.852752] msm_vidc_venc: Inside vid_enc_open()

[ 57.852874] msm_vidc_enc: Inside vid_enc_open_client()

[ 57.854248] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801

[ 57.873443] : fw_version 9:23:2014

[ 57.874511] msm_vidc_enc: Inside vid_enc_release()

[ 57.874725] msm_vidc_enc: Inside vid_enc_close_client()

[ 57.899627] msm_vidc_enc: Return from vid_enc_release() [ 57.901824] msm_vidc_venc: Inside vid_enc_open()

[ 57.901947] msm_vidc_enc: Inside vid_enc_open_client()

[ 57.903503] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801

[ 57.923522] : fw_version 9:23:2014

[ 57.925140] msm_vidc_enc: Inside vid_enc_release()

[ 57.925537] msm_vidc_enc: Inside vid_enc_close_client()

[ 57.949432] msm_vidc_enc: Return from vid_enc_release() [ 57.973785] msm_vidc_dec: Inside vid_dec_open()

[ 57.975128] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801

[ 57.994262] : fw_version 9:23:2014 [ 57.995758] msm_vidc_dec: Inside vid_dec_release() [ 58.020050] msm_vidc_dec: Return from vid_dec_release()

[ 58.028900] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801 [ 58.103210] pil pil2: vidc: Brought out of reset

[ 58.124450] : fw_version 9:23:2014 [ 58.124969] Securing... [ 58.132110] msm_vidc_dec: Inside vid_dec_release_secure() [ 58.143280] Unsecuring.... [ 58.190155] msm_vidc_dec: Return from vid_dec_release_secure() [ 58.192749] msm_vidc_dec: Inside vid_dec_open()

[ 58.193145] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801

[ 58.213470] : fw_version 9:23:2014 [ 58.214965] msm_vidc_dec: Inside vid_dec_release() [ 58.239318] msm_vidc_dec: Return from vid_dec_release() [ 58.241027] msm_vidc_dec: Inside vid_dec_open()

[ 58.241363] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801

[ 58.263488] : fw_version 9:23:2014 [ 58.264801] msm_vidc_dec: Inside vid_dec_release() [ 58.289886] msm_vidc_dec: Return from vid_dec_release() [ 58.291870] msm_vidc_dec: Inside vid_dec_open()

[ 58.292175] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801

[ 58.314178] : fw_version 9:23:2014 [ 58.315338] msm_vidc_dec: Inside vid_dec_release() [ 58.342681] msm_vidc_dec: Return from vid_dec_release() [ 59.072235] init: Starting service 'su_daemon'... [ 59.117523] init: Untracked pid 1231 exited with status 1 [ 59.117767] init: Service 'su_daemon' (pid 1226) exited with status 0 [ 59.117919] init: Service 'su_daemon' (pid 1226) killing any children in process group [ 59.369445] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 59.383911] init: Starting service 'p2p_supplicant'... [ 59.460662] ADDRCONF(NETDEV_UP): p2p0: link is not ready [ 60.329559] pil pil4: gss: Brought out of reset [ 60.346588] Notify: smsm init [ 60.735992] diag: proc 0, msg mask update fail -12, tried 419 [ 61.047241] binder: 719:727 refcount change on invalid ref 105 [ 61.378173] bcm2079x-i2c 0-0077: 10,93 [ 62.215148] gpio 25 VCM_PD(1) [ 62.215240] gpio 31 XSHUTDN(1) [ 62.222167] init: write_file: Unable to open '/sys/block/mmcblk1/queue/scheduler': No such file or directory [ 62.222351] init: write_file: Unable to open '/sys/block/sda/queue/scheduler': No such file or directory [ 62.222473] init: write_file: Unable to open '/sys/block/sde/queue/scheduler': No such file or directory [ 62.222625] init: write_file: Unable to open '/sys/block/dm-0/queue/scheduler': No such file or directory [ 62.222900] init: write_file: Unable to open '/sys/block/mmcblk1/queue/iosched/slice_idle': No such file or directory [ 62.223144] init: write_file: Unable to open '/sys/block/sda/queue/iosched/slice_idle': No such file or directory [ 62.223297] init: write_file: Unable to open '/sys/block/sde/queue/iosched/slice_idle': No such file or directory [ 62.223724] init: write_file: Unable to open '/sys/block/dm-0/queue/iosched/slice_idle': No such file or directory [ 62.243865] msm_sensor_config:1422 sensor state 1 [ 62.520477] msm_actuator_config:947 msm_actuator_power_down failed -14 [ 62.553283] msm_sensor_config:1445 sensor state 0 [ 62.893188] gpio 43 CAM_RST(1) [ 62.953124] mi1040_sensor_match_id +++ [ 62.953918] Sensor id: 0x2481 [ 62.954010] PMIC gpio 11 CAM_VENDOR_1(1) [ 62.954101] PMIC gpio 10 CAM_VENDOR_0(0) [ 62.954223] PMIC gpio 24 CAM_LENS(1) [ 62.954284] Vendor is A [ 62.954345] mi1040_sensor_match_id --- [ 64.151733] binder: 719:727 refcount change on invalid ref 286 [ 64.224395] init: Starting service 'su_daemon'... [ 64.256317] init: Service 'su_daemon' (pid 1976) exited with status 0 [ 64.256469] init: Service 'su_daemon' (pid 1976) killing any children in process group [ 64.262451] init: Untracked pid 1981 exited with status 1 [ 67.279937] binder: 1701:1718 refcount change on invalid ref 9 [ 69.326843] init: Starting service 'su_daemon'... [ 69.351257] init: Untracked pid 2347 exited with status 1 [ 69.351470] init: Service 'su_daemon' (pid 2345) exited with status 0 [ 69.351562] init: Service 'su_daemon' (pid 2345) killing any children in process group [ 73.355590] type=1404 audit(1481822720.298:9): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295 [ 73.866271] EXT4-fs (mmcblk0p30): re-mounted. Opts: noauto_da_alloc,errors=panic,data=ordered [ 73.970306] type=1400 audit(1481822720.918:10): avc: denied { write } for pid=2684 comm="app_process" name="system@framework@boot.art" dev="mmcblk0p30" ino=1138693 scontext=u:r:shell:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=file permissive=1 [ 74.184448] type=1400 audit(1481822721.138:11): avc: denied { write } for pid=2684 comm="main" name="arm" dev="mmcblk0p30" ino=1138691 scontext=u:r:shell:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=dir permissive=1 [ 74.185211] type=1400 audit(1481822721.138:12): avc: denied { add_name } for pid=2684 comm="main" name="system@framework@am.jar@classes.dex.flock" scontext=u:r:shell:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=dir permissive=1 [ 74.185516] type=1400 audit(1481822721.138:13): avc: denied { create } for pid=2684 comm="main" name="system@framework@am.jar@classes.dex.flock" scontext=u:r:shell:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=file permissive=1 [ 74.214111] type=1400 audit(1481822721.169:14): avc: denied { remove_name } for pid=2684 comm="main" name="system@framework@am.jar@classes.dex.flock" dev="mmcblk0p30" ino=1138965 scontext=u:r:shell:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=dir permissive=1 [ 74.214416] type=1400 audit(1481822721.169:15): avc: denied { unlink } for pid=2684 comm="main" name="system@framework@am.jar@classes.dex.flock" dev="mmcblk0p30" ino=1138965 scontext=u:r:shell:s0 tcontext=u:object_r:dalvikcache_data_file:s0 tclass=file permissive=1 [ 74.317108] type=1400 audit(1481822721.269:16): avc: denied { sys_nice } for pid=2786 comm="Binder_1" capability=23 scontext=u:r:shell:s0 tcontext=u:r:shell:s0 tclass=capability permissive=1 [ 74.932220] init: Starting service 'su_daemon'... [ 74.954925] init: Untracked pid 2815 exited with status 1 [ 74.955139] init: Service 'su_daemon' (pid 2812) exited with status 0 [ 74.955230] init: Service 'su_daemon' (pid 2812) killing any children in process group [ 75.337341] wlan: connected to c0:3e:0f:9d:4a:d1 [ 75.337493] wlan(3) c0:3e:0f:9d:4a:d1 Standalone [ 75.338104] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 76.324432] bq27541_get_psp status: Not charging ret= 0x0201 [ 76.325134] bq27541_get_psp status: Not charging ret= 0x0201 [ 76.325775] bq27541_get_psp voltage_now= 4157000 uV [ 76.326416] bq27541_get_capacity = 98% ret= 97 [ 76.327789] bq27541_get_psp temperature= 282 (0.1\xffffffa2XC) [ 76.329528] bq27541_get_psp current = -690 mA [ 76.330566] bq27541_get_capacity = 98% ret= 97 [ 76.331665] bq27541_get_psp voltage_now= 4157000 uV [ 76.332427] bq27541_get_psp temperature= 282 (0.1\xffffffa2XC) [ 76.333099] bq27541_get_psp status: Not charging ret= 0x0201 [ 76.656646] qtaguid: ctrl_untag(u -1): failed to lookup sock_fd=-1 err=-9 pid=2870 tgid=2736 uid=10093 [ 77.184783] binder: 2589:2598 refcount change on invalid ref 9 [ 78.308715] init: Untracked pid 2680 exited with status 90 [ 78.355773] init: Untracked pid 2649 exited with status 106 [ 78.357116] init: Untracked pid 2684 exited with status 0 [ 78.394531] init: Untracked pid 2663 exited with status 0 [ 79.395782] init: Starting service 'su_daemon'... [ 79.421874] init: Untracked pid 3093 exited with status 1 [ 79.422088] init: Service 'su_daemon' (pid 3089) exited with status 0 [ 79.422180] init: Service 'su_daemon' (pid 3089) killing any children in process group [ 79.867889] mipi_JDI_set_backlight: pwm disable [ 80.014923] mipi_JDI_lcd_off+ [ 80.014923] mipi_JDI_lcd_off, JDI display off command+ [ 80.133789] mipi_JDI_lcd_off, JDI display off command- [ 80.133819] mipi_JDI_lcd_off- [ 80.133819] mipi_dsi_panel_power+, on=0 [ 80.184265] mipi_dsi_panel_power- [ 80.190704] EXT_COMMON: hdmi_common_wta_hpd: '1' (unchanged) [ 80.191345] request_suspend_state: sleep (0->3) at 80187625329 (2016-12-15 17:25:26.740846988 UTC) [ 80.191436] early_suspend: call handlers [ 80.191558] [ektf3k]:[elan] elan_ktf3k_ts_suspend: enter [ 80.192016] active wake lock PowerManagerService.Dreams [ 80.192138] active wake lock PowerManagerService.WakeLocks [ 80.192199] active wake lock PowerManagerService.Display [ 80.192321] PM: Syncing filesystems... [ 80.308319] sync done. [ 84.427947] init: Starting service 'su_daemon'... [ 84.504364] init: Service 'su_daemon' (pid 3207) exited with status 0 [ 84.504608] init: Service 'su_daemon' (pid 3207) killing any children in process group [ 84.505615] init: Untracked pid 3209 exited with status 1 [ 89.509857] init: Starting service 'su_daemon'... [ 89.591735] init: Service 'su_daemon' (pid 3225) exited with status 0 [ 89.592071] init: Service 'su_daemon' (pid 3225) killing any children in process group [ 89.599273] init: Untracked pid 3227 exited with status 1 [ 94.602416] init: Starting service 'su_daemon'... [ 94.675079] init: Service 'su_daemon' (pid 3229) exited with status 0 [ 94.675323] init: Service 'su_daemon' (pid 3229) killing any children in process group [ 94.679016] init: Untracked pid 3231 exited with status 1 [ 95.343872] gpio_keys: Pressed KEY_POWER [ 95.448028] request_suspend_state: wakeup (3->0) at 95444338167 (2016-12-15 17:25:41.997529308 UTC) [ 95.448211] late_resume: call handlers [ 95.448303] [ektf3k]:[elan] elan_ktf3k_ts_resume: enter [ 95.464569] mipi_dsi_panel_power+, on=1 [ 95.467132] [ektf3k]:[elan] dump repsponse: 58 [ 95.467132] late_resume: done [ 95.514556] mipi_dsi_panel_power- [ 95.520782] mipi_JDI_lcd_on+ [ 95.520782] mipi_JDI_lcd_on, JDI display on command+, command bl [ 95.533813] gpio_keys: Released KEY_POWER [ 95.664001] mipi_JDI_lcd_on, JDI display on command- [ 95.664031] mipi_JDI_lcd_on- [ 95.675689] EXT_COMMON: hdmi_common_wta_hpd: '1' (unchanged) [ 95.684173] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 200000000 [ 95.774627] mipi_JDI_set_backlight: pwm enable [ 99.686035] init: Starting service 'su_daemon'... [ 99.728149] init: Service 'su_daemon' (pid 3291) exited with status 0 [ 99.728302] init: Service 'su_daemon' (pid 3291) killing any children in process group [ 99.730682] init: Untracked pid 3293 exited with status 1 [ 100.649871] anx7808_cbl_det_isr : gpio_get_value(anx7808->pdata->gpio_cbl_det) = 1 [ 100.650054] anx7808_cbl_det_isr : detect cable removal [ 100.650146] msm_otg_id_pin_irq_enabled : id_pin_irq_enable = 1 [ 100.650329] anx7808_cbl_det_isr : gpio_get_value(anx7808->pdata->gpio_cbl_det) = 0 [ 100.650390] anx7808_cbl_det_isr : detect cable removal [ 100.650543] msm_otg_id_pin_irq_enabled : id_pin_irq_enable = 1 [ 101.274749] id_pin_irq_work_function: APQ_OTG_ID_PIN is low : Host mode [ 101.281097] msm_otg msm_otg: USB exited from low power mode [ 101.293548] vbus_otg is NULL. [ 101.394226] NOHZ: local_softirq_pending 200 [ 101.394287] smb345_charger: [smb345_otg_status] otg function: on [ 101.404571] msm_otg msm_otg: phy_reset: success [ 101.408630] smb345_charger: [smb345_inok_isr] VBUS_DET = L [ 101.516937] Host mode: Set DC level as 0x68 for flo. [ 101.517272] msm_hsusb_host msm_hsusb_host: Qualcomm On-Chip EHCI Host Controller [ 101.517700] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 101.517852] msm_hsusb_host msm_hsusb_host: new USB bus registered, assigned bus number 1 [ 101.543945] msm_hsusb_host msm_hsusb_host: irq 132, io mem 0x12500000 [ 101.564178] msm_hsusb_host msm_hsusb_host: USB 2.0 started, EHCI 1.00 [ 101.565582] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 101.565948] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 101.566314] usb usb1: Product: Qualcomm On-Chip EHCI Host Controller [ 101.566528] usb usb1: Manufacturer: Linux 3.4.0-cyanogenmod-g80db3da ehci_hcd [ 101.566864] usb usb1: SerialNumber: msm_hsusb_host [ 101.578277] hub 1-0:1.0: USB hub found [ 101.578552] hub 1-0:1.0: 1 port detected [ 101.895751] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host [ 102.024902] notifying plugin [ 102.069763] usb 1-1: New USB device found, idVendor=0cf3, idProduct=9271 [ 102.069854] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 102.069976] usb 1-1: Product: USB2.0 WLAN [ 102.070037] usb 1-1: Manufacturer: ATHEROS [ 102.070159] usb 1-1: SerialNumber: 12345 [ 104.737640] init: Starting service 'su_daemon'... [ 104.773284] init: Service 'su_daemon' (pid 3334) exited with status 0 [ 104.773437] init: Service 'su_daemon' (pid 3334) killing any children in process group [ 104.775512] init: Untracked pid 3336 exited with status 1 [ 109.781555] init: Starting service 'su_daemon'... [ 109.826416] init: Untracked pid 3345 exited with status 1 [ 109.829437] init: Service 'su_daemon' (pid 3343) exited with status 0 [ 109.829833] init: Service 'su_daemon' (pid 3343) killing any children in process group [ 110.938598] smb345_charger: [smb345_inok_isr] VBUS_DET = H [ 110.939178] anx7808_cbl_det_isr : gpio_get_value(anx7808->pdata->gpio_cbl_det) = 0 [ 110.939392] anx7808_cbl_det_isr : detect cable removal [ 110.939880] msm_otg_id_pin_irq_enabled : id_pin_irq_enable = 1 [ 110.940246] usb 1-1: USB disconnect, device number 2 [ 111.634246] notifying plugin [ 111.634490] id_pin_irq_work_function: APQ_OTG_ID_PIN is high : leave Host mode [ 111.635955] msm_hsusb_host msm_hsusb_host: remove, state 1 [ 111.636199] usb usb1: USB disconnect, device number 1 [ 111.646697] msm_hsusb_host msm_hsusb_host: USB bus 1 deregistered [ 111.647857] smb345_charger: [smb345_otg_status] otg function: off [ 112.149780] msm_otg msm_otg: Failed notifying 0 charger type to PMIC [ 112.150085] The USB charging type is same : return [ 112.150421] msm_otg msm_otg: Failed notifying 0 charger type to PMIC [ 112.152374] msm_otg msm_otg: phy_reset: success [ 112.260803] msm_otg msm_otg: USB in low power mode [ 114.835174] init: Starting service 'su_daemon'... [ 114.916778] init: Service 'su_daemon' (pid 3422) exited with status 0 [ 114.916870] init: Service 'su_daemon' (pid 3422) killing any children in process group [ 114.917297] init: Untracked pid 3431 exited with status 1 [ 115.342651] EXT4-fs (mmcblk0p30): re-mounted. Opts: noauto_da_alloc,errors=panic,data=ordered [ 116.101409] type=1400 audit(1481822762.638:17): avc: denied { call } for pid=3425 comm="main" scontext=u:r:zygote:s0 tcontext=u:r:system_server:s0 tclass=binder permissive=1 [ 116.101745] type=1400 audit(1481822762.638:18): avc: denied { transfer } for pid=3425 comm="main" scontext=u:r:zygote:s0 tcontext=u:r:system_server:s0 tclass=binder permissive=1 [ 116.133605] type=1400 audit(1481822762.668:19): avc: denied { call } for pid=1438 comm="Binder_8" scontext=u:r:system_server:s0 tcontext=u:r:zygote:s0 tclass=binder permissive=1 [ 116.136962] init: Untracked pid 3420 exited with status 122 [ 116.169891] init: Untracked pid 3425 exited with status 0 [ 119.170684] init: Starting service 'su_daemon'... [ 119.210449] init: Service 'su_daemon' (pid 3496) exited with status 0 [ 119.210571] init: Service 'su_daemon' (pid 3496) killing any children in process group [ 119.214355] init: Untracked pid 3499 exited with status 1 [ 119.217254] NOHZ: local_softirq_pending 200 [ 119.574340] NOHZ: local_softirq_pending 200 [ 121.943695] NOHZ: local_softirq_pending 200 [ 122.512145] binder: 1779:1787 refcount change on invalid ref 32 [ 124.221618] init: Starting service 'su_daemon'... [ 124.268554] init: Service 'su_daemon' (pid 3617) exited with status 0 [ 124.268707] init: Service 'su_daemon' (pid 3617) killing any children in process group [ 124.270446] init: Untracked pid 3619 exited with status 1 root@kali:~#

[jcadduono]

this is not related to nethunter as you do not have a nethunter kernel installed

[HawksRepos]

*UPDATE

I now have the origional stock ROM installed on the Nexus 7 and used the Nethunter-Installer (with Kali-Linux) and every worked perfectly without errors and all the apps et work perfectly.

The problem still persisted. Nethunter recognised the wifi card as a USB device but not as a wifi card so it did not assign it to wlan1.

looking through comments i managed to find a work around, you can use the MacChanger built into the nethunter app to reset wlan1 MAC. once this is done it picks it up as wlan1!

but now i have a new issue...

by accident i turned the tablet on with the wifi adaptor plugged in with OTG cable. this caused the tablet to assign the external wifi card to wlan0.

Now everything still works fine, i can still turn the monitor mode on and use it for pentesting but i cannot use the internal wifi card.

also, when i now turn the device on and plug in the wifi adaptor after, it does not even recognise it as a usb device.

doing a little more investigation it seems to have changed its internal mac address to the same as the tablets (if that is even possible?).

would someone please be able to help me?

not sure why this was closed in the first place as i was using the nethunter kernal and if not, then i could at least had some advice to point me in the right direction.

(New Output of cat /proc/version in adb shell or NetHunter Terminal: Linux Version 3.4.0-gae95f7e-dirty (root@nhbuild-box) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT fri jul 29 23:09:11 CDT 2016

ROM was downloaded from the official website for stock roms (latest Marshmallow 6.0.1) )

[callyama]

Hi I have this exact issue.. @Hawkinzzz the MAC Changer is crashing when I ... -> Reset MAC repeatedly unfortunately. Is there any other way to check what's going on with this issue? It worked many months back for me, then I had issues with updates and some things and put the tablet down. Picked it up today, finally got everything to update but now the antenna doesn't work.

My kernel version in the About section of Android says: 3.4.0-gae95f7e-dirty, root@nhbuild-box #1 And I'm positive I've flashed kali.... multiple times. Any insight @jcadduono ? I'd really appreciate the help.

lsusb does show it as being there, and confirmed the firmware is in the proper folder, but it won't light up and won't show up in iwconfig or ifconfig, it's driving me insane