offlimitxz / reaver-wps

Automatically exported from code.google.com/p/reaver-wps
0 stars 0 forks source link

Reaver strange problem #721

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
A few things to consider before submitting an issue:

0. We write documentation for a reason, if you have not read it and are
having problems with Reaver these pages are required reading before
submitting an issue:
http://code.google.com/p/reaver-wps/wiki/HintsAndTips
http://code.google.com/p/reaver-wps/wiki/README
http://code.google.com/p/reaver-wps/wiki/FAQ
http://code.google.com/p/reaver-wps/wiki/SupportedWirelessDrivers
1. Reaver will only work if your card is in monitor mode.  If you do not
know what monitor mode is then you should learn more about 802.11 hacking
in linux before using Reaver.
2. Using Reaver against access points you do not own or have permission to
attack is illegal.  If you cannot answer basic questions (i.e. model
number, distance away, etc) about the device you are attacking then do not
post your issue here.  We will not help you break the law.
3. Please look through issues that have already been posted and make sure
your question has not already been asked here: http://code.google.com/p
/reaver-wps/issues/list
4. Often times we need packet captures of mon0 while Reaver is running to
troubleshoot the issue (tcpdump -i mon0 -s0 -w broken_reaver.pcap).  Issue
reports with pcap files attached will receive more serious consideration.

Answer the following questions for every issue submitted:

0. What version of Reaver are you using?  (Only defects against the latest
version will be considered.)

1. What operating system are you using (Linux is the only supported OS)?

2. Is your wireless card in monitor mode (yes/no)?
Yes
3. What is the signal strength of the Access Point you are trying to crack?
Around 70%
4. What is the manufacturer and model # of the device you are trying to
crack?
Tp Link tl-wn722n

5. What is the entire command line string you are supplying to reaver?
Reaver -i mon0 -c  - b - -vv -N

6. Please describe what you think the issue is.

7. Paste the output from Reaver below.
[+] Associated with 00:26:5A:44:EC:66 (ESSID:----)
[+] Trying pin 12345670
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[+] Trying pin 00005678
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[+] Trying pin 01235678
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[+] Trying pin 11115670
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK

I used all reaver commands as intended but strange thing is reaver associated 
with ap and all it start craking by trying pins and all goes well but problem 
is after sending m4 message it gives back Warning:Recieved Timeout Occured and 
it goes on the next pin like there is no error or something and it keeps trying 
but after every new pin it gives  [!] WARNING: Receive timeout occurred and 
goes on new!
Is this problem and will it crack the wpa if i leave it like this?
Thanks in advance!

Original issue reported on code.google.com by hariskol...@gmail.com on 30 Apr 2015 at 8:53