Layout - Multiple Cuts Shown - Measurement have no relationship to actual component or sheet sizes.

[GoogleCodeExporter]

Sketchup : 14.0.4899
Cutlist     : 4.1.12
OSX         : 10.9.3.

Having issues, I created a new sketchup diagram consisting of a single group of 
a single sheet with dimensions 1000mm * 2000mm * 15mm.

I then ran the cutlist plugin. Sheets to be used were 8' * 4' (2440mm * 1220mm)

It is the layout results with which I am having an issue. 

I was expecting to see how the single component might be laid out on a 8' *4' 
board (or smaller).

What I get is 8 instances of something with these values associated with them

Cutting Diagram - BoardsEfficiency = 82.0%
Total used for layout: 0.1512 cu.m. 
~ 152mm(~ 140mm) x ~ 2438mm, ~ 51mm 
Not assigned 0.0189 cu.m. (82.0%)

Those numbers (line 3) seem to have no relationship with the component sizes.

Trying the same on a different sketchup file, I have the same issue except that 
the number of duplicate component instances varies from 3 to 12.

The component cut list appears to be OK.

Original issue reported on code.google.com by UkanRi...@gmail.com on 29 May 2014 at 10:03

Attachments:

• [Screen Shot 2014-05-29 at 11.01.06.png](https://storage.googleapis.com/google-code-attachments/cutlist/issue-21/comment-0/Screen Shot 2014-05-29 at 11.01.06.png)
• [Screen Shot 2014-05-29 at 11.01.50.png](https://storage.googleapis.com/google-code-attachments/cutlist/issue-21/comment-0/Screen Shot 2014-05-29 at 11.01.50.png)
• [Screen Shot 2014-05-29 at 11.02.17.png](https://storage.googleapis.com/google-code-attachments/cutlist/issue-21/comment-0/Screen Shot 2014-05-29 at 11.02.17.png)
• [Screen Shot 2014-05-29 at 11.02.40.png](https://storage.googleapis.com/google-code-attachments/cutlist/issue-21/comment-0/Screen Shot 2014-05-29 at 11.02.40.png)
• [Screen Shot 2014-05-29 at 11.03.30.png](https://storage.googleapis.com/google-code-attachments/cutlist/issue-21/comment-0/Screen Shot 2014-05-29 at 11.03.30.png)