We have a pile of old rusty t-posts that need organized. In the work area in the back field there are a bunch of old rusted t-posts.
For this issue you will need to first construct a storage area to store the t-posts. The picture below shows an example of what I am talking about. The key features are:
ground cover extends out several feet from what is actually needed
t-posts are stored vertically by leaning against the "H" structure
plywood is need to keep the t-post from punching holes in the ground cover
Once you have fabricated a storage area, sort through the pile of t-posts, discard the bad t-posts in the scrap pile and store the remaining good ones in the storage area.
What is needed
ground cover and plywood
t-post driver
plumber torch and a 2x4 board to cut the ground cover
protection; safety glasses, gloves and boots
What to expect
How long will this take: 3hrs
How much coordination is needed: We need about 15 min to discuss and pick a location for the new storage area
We have a pile of old rusty t-posts that need organized. In the work area in the back field there are a bunch of old rusted t-posts.
For this issue you will need to first construct a storage area to store the t-posts. The picture below shows an example of what I am talking about. The key features are:
Once you have fabricated a storage area, sort through the pile of t-posts, discard the bad t-posts in the scrap pile and store the remaining good ones in the storage area.
What is needed
What to expect
Where