search

olikraus / dogm128

Automatically exported from code.google.com/p/dogm128
Other
20 stars 6 forks source link

eaDOGL128-6 init #127

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
Hi there is adiferent init procedure to start the  EA DOGL-128-6
this is the Display with no Backlight Needet in the single supply mode

What is the expected output? What do you see instead?
to use this Dogm128 with the Lib

What version of the product are you using? On what operating system?
1.09

Please provide any additional information below.

see the picture of init the GLCD ,out of the datasheet 

http://www.pictureupload.de/originals/pictures/140511181130_dogm.png

Original issue reported on code.google.com by lot...@foengarage.de on 14 May 2011 at 4:12

GoogleCodeExporter commented 9 years ago 
Why does the current init procedure not work? What happens with
the current init procedure?
What exactly has to be changed to the current init procedure?

Original comment by olikr...@gmail.com on 15 May 2011 at 9:49

GoogleCodeExporter commented 9 years ago

Original comment by olikr...@gmail.com on 15 May 2011 at 9:49

GoogleCodeExporter commented 9 years ago 
Add a hint or wiki page where to change the init sequence for the displays

Original comment by olikr...@gmail.com on 16 May 2011 at 9:54

GoogleCodeExporter commented 9 years ago 
Umgesetzt:
http://code.google.com/p/dogm128/wiki/install#Display_Setup

Original comment by olikr...@gmail.com on 16 May 2011 at 5:16