Atmel studio 7 errors

[TheNightWhisper]

Hi My friends I'm trying to make IR remote control receiver using atmega8 u controller, using atmel studio 7, I've created the main file main.c and included the library header file, but when compiling the project I've get punch of errors and after googling i found some one recommend changing the main file name from main.c to main.cpp ,and re compile, after doing this really it solve many many issues (and i don't know why ? !), but i stuck with two errors

1- ID returned 1 Exit Status 2- recipe for target IRRemote.elf failed

so please if any one can help to get the hex file main.cpp `

define recvPin 0

define outPutPin1 1

define outPutOin2 2

include <avr/io.h>

include "IRremote.h"

int main(void) { IRrecv irRecv(recvPin); decode_results results; irRecv.enableIRIn(); DDRC=(1<<2|1<<1|0<<0); while (1) { if(irRecv.decode(&results)) { switch(results.value) { case 0xFD00FF: PORTC=(1<<1); break;

              case 0xFD807F:
                PORTC=(1<<2);

            break;

        }
    }
}

}

IRremot.h

ifndef IRremote_h

define IRremote_h

//------------------------------------------------------------------------------ // The ISR header contains several useful macros the user may wish to use //

include "IRremoteInt.h"

//------------------------------------------------------------------------------ // Supported IR protocols // Each protocol you include costs memory and, during decode, costs time // Disable (set to 0) all the protocols you do not need/want! //

define DECODE_NEC 1

define SEND_NEC 1

//------------------------------------------------------------------------------ // When sending a Pronto code we request to send either the "once" code // or the "repeat" code // If the code requested does not exist we can request to fallback on the // other code (the one we did not explicitly request) // // I would suggest that "fallback" will be the standard calling method // The last paragraph on this page discusses the rationale of this idea: // http://www.remotecentral.com/features/irdisp2.htm //

define PRONTO_ONCE false

define PRONTO_REPEAT true

define PRONTO_FALLBACK true

define PRONTO_NOFALLBACK false

//------------------------------------------------------------------------------ // An enumerated list of all supported formats // You do NOT need to remove entries from this list when disabling protocols! // typedef enum { UNKNOWN = -1, UNUSED = 0, RC5, RC6, NEC, SONY, PANASONIC, JVC, SAMSUNG, WHYNTER, AIWA_RC_T501, LG, SANYO, MITSUBISHI, DISH, SHARP, DENON, PRONTO, LEGO_PF, } decode_type_t;

//------------------------------------------------------------------------------ // Set DEBUG to 1 for lots of lovely debug output //

define DEBUG 0

//------------------------------------------------------------------------------ // Debug directives //

if DEBUG

define DBG_PRINT(...) Serial.print(__VA_ARGS__)

define DBG_PRINTLN(...) Serial.println(__VA_ARGS__)

else

define DBG_PRINT(...)

define DBG_PRINTLN(...)

endif

//------------------------------------------------------------------------------ // Mark & Space matching functions // int MATCH (int measured, int desired) ; int MATCH_MARK (int measured_ticks, int desired_us) ; int MATCH_SPACE (int measured_ticks, int desired_us) ;

//------------------------------------------------------------------------------ // Results returned from the decoder // class decode_results { public: decode_type_t decode_type; // UNKNOWN, NEC, SONY, RC5, ... unsigned int address; // Used by Panasonic & Sharp [16-bits] unsigned long value; // Decoded value [max 32-bits] int bits; // Number of bits in decoded value volatile unsigned int *rawbuf; // Raw intervals in 50uS ticks int rawlen; // Number of records in rawbuf int overflow; // true iff IR raw code too long };

//------------------------------------------------------------------------------ // Decoded value for NEC when a repeat code is received //

define REPEAT 0xFFFFFFFF

//------------------------------------------------------------------------------ // Main class for receiving IR // class IRrecv { public: IRrecv (int recvpin) ; IRrecv (int recvpin, int blinkpin);

    void  blink13    (int blinkflag) ;
    int   decode     (decode_results *results) ;
    void  enableIRIn ( ) ;
    bool  isIdle     ( ) ;
    void  resume     ( ) ;

private:
    long  decodeHash (decode_results *results) ;
    int   compare    (unsigned int oldval, unsigned int newval) ;

    //......................................................................

    //......................................................................

if DECODE_NEC

        bool  decodeNEC        (decode_results *results) ;

endif

} ;

//------------------------------------------------------------------------------ // Main class for sending IR // class IRsend { public:

ifdef USE_SOFT_CARRIER

    IRsend(int pin = SEND_PIN)
    {
        sendPin = pin;
    }

else

    IRsend()
    {
    }

endif

    void  custom_delay_usec (unsigned long uSecs);
    void  enableIROut       (int khz) ;
    void  mark              (unsigned int usec) ;
    void  space             (unsigned int usec) ;
    void  sendRaw           (const unsigned int buf[],  unsigned int len,  unsigned int hz) ;

    //......................................................................

    //......................................................................

if SEND_NEC

        void  sendNEC        (unsigned long data,  int nbits) ;

endif

    //......................................................................

ifdef USE_SOFT_CARRIER

private:
    int sendPin;

    unsigned int periodTime;
    unsigned int periodOnTime;

    void sleepMicros(unsigned long us);
    void sleepUntilMicros(unsigned long targetTime);

else

    const int sendPin = SEND_PIN;

endif

} ;

endif

the generated makefile ################################################

Automatically-generated file. Do not edit!

################################################################################

SHELL := cmd.exe RM := rm -rf

USER_OBJS :=

LIBS := PROJ :=

O_SRCS := C_SRCS := S_SRCS := S_UPPER_SRCS := OBJ_SRCS := ASM_SRCS := PREPROCESSING_SRCS := OBJS := OBJS_AS_ARGS := C_DEPS := C_DEPS_AS_ARGS := EXECUTABLES := OUTPUT_FILE_PATH := OUTPUT_FILE_PATH_AS_ARGS := AVR_APP_PATH :=$$$AVR_APP_PATH$$$ QUOTE := " ADDITIONAL_DEPENDENCIES:= OUTPUT_FILE_DEP:= LIB_DEP:= LINKER_SCRIPT_DEP:=

Every subdirectory with source files must be described here

SUBDIRS :=

Add inputs and outputs from these tool invocations to the build variables

C_SRCS +=

PREPROCESSING_SRCS +=

ASM_SRCS +=

OBJS +=

OBJS_AS_ARGS +=

C_DEPS +=

C_DEPS_AS_ARGS +=

OUTPUT_FILE_PATH +=IRRemote.elf

OUTPUT_FILE_PATH_AS_ARGS +=IRRemote.elf

ADDITIONAL_DEPENDENCIES:=

OUTPUT_FILE_DEP:= ./makedep.mk

LIB_DEP+=

LINKER_SCRIPT_DEP+=

AVR32/GNU C Compiler

AVR32/GNU Preprocessing Assembler

AVR32/GNU Assembler

ifneq ($(MAKECMDGOALS),clean) ifneq ($(strip $(C_DEPS)),) -include $(C_DEPS) endif endif

Add inputs and outputs from these tool invocations to the build variables

All Target

all: $(OUTPUT_FILE_PATH) $(ADDITIONAL_DEPENDENCIES)

$(OUTPUT_FILE_PATH): $(OBJS) $(USER_OBJS) $(OUTPUT_FILE_DEP) $(LIB_DEP) $(LINKER_SCRIPT_DEP) @echo Building target: $@ @echo Invoking: AVR/GNU Linker : 5.4.0 $(QUOTE)C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-gcc.exe$(QUOTE) -o$(OUTPUT_FILE_PATH_AS_ARGS) $(OBJS_AS_ARGS) $(USER_OBJS) $(LIBS) -Wl,-Map="IRRemote.map" -Wl,--start-group -Wl,-lm -Wl,--end-group -Wl,--gc-sections -mmcu=atmega8a -B "C:\Program Files (x86)\Atmel\Studio\7.0\Packs\atmel\ATmega_DFP\1.2.209\gcc\dev\atmega8a"
@echo Finished building target: $@ "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-objcopy.exe" -O ihex -R .eeprom -R .fuse -R .lock -R .signature -R .user_signatures "IRRemote.elf" "IRRemote.hex" "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-objcopy.exe" -j .eeprom --set-section-flags=.eeprom=alloc,load --change-section-lma .eeprom=0 --no-change-warnings -O ihex "IRRemote.elf" "IRRemote.eep" || exit 0 "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-objdump.exe" -h -S "IRRemote.elf" > "IRRemote.lss" "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-objcopy.exe" -O srec -R .eeprom -R .fuse -R .lock -R .signature -R .user_signatures "IRRemote.elf" "IRRemote.srec" "C:\Program Files (x86)\Atmel\Studio\7.0\toolchain\avr8\avr8-gnu-toolchain\bin\avr-size.exe" "IRRemote.elf"

Other Targets

clean: -$(RM) $(OBJS_AS_ARGS) $(EXECUTABLES)
-$(RM) $(C_DEPS_AS_ARGS)
rm -rf "IRRemote.elf" "IRRemote.a" "IRRemote.hex" "IRRemote.lss" "IRRemote.eep" "IRRemote.map" "IRRemote.srec" "IRRemote.usersignatures" `

[TheNightWhisper]

this a snap shot of my project

[olikraus]

I can support regarding u8g but unfortunately not with irremote.

[TheNightWhisper]

pls, olikraus, i didn't understand what you mean

[olikraus]

This is the u8glib issue tracker. The purpose is to discuss topics related to u8glib. From what I see, your question is not at all related to u8glib.

[TheNightWhisper]

many thanks olikraus

[TheNightWhisper]

This is the u8glib issue tracker. The purpose is to discuss topics related to u8glib. From what I see, your question is not at all related to u8glib. so pls where is can ask this question ??