Closed GoogleCodeExporter closed 9 years ago
As for number 1 : Difference between Always available and Available on wifi is
the fact that wifi is lock or not. If you change the lock wifi value in Network
setting, you'll observe that Always available will become Available on wifi.
Settings in easy configuration are just shortcut for other settings.
For number 2 : there is already an open issue related to this one. Besides, you
must check that you allow outgoing calls over 3G in settings (either in the
easy configuration view or in the network view).
For number 3 : are you sure your gsm provider allow you to use voip over 3G?
(In France for example there is filters that block all sip network traffic -
and not just related to port).
For all this issues was it reproducible with the 0.00-12 available on the
market? And have you any success using another voip application available on
android? (Linphone, Sipdroid?)
Original comment by r3gis...@gmail.com
on 21 Aug 2010 at 9:14
For issue #3, I conducted several tests :
Equipment :
Nexus One with 3G
Ubuntu with 3G and Ekiga
SIP provider is Ekiga.net
Test #1 :
Echo test of Ekiga on Ubuntu with 3G success. I think that my 3G provider
supports SIP protocol.
Test #2 :
Nexus One changed to SipDroid and dial to Ubuntu over 3G. The result is no
sound.
Test #3 :
Nexus One changed to SipDroid and conduct Echo test to Ekiga with the result of
no sound.
Test #4 :
Nexus One use CSipSimple and conduct Echo test to Ekiga with the result of no
sound.
I think that there may be 3G problem on both CSipSimple and SipDroid or on
Android 2.2.
Original comment by runner...@gmail.com
on 21 Aug 2010 at 11:10
It is possible that while in 3G in need a stun server. What is the stun server
you configured in CSipSimple? Are you sure it is reacheable from your 3G
access? Maybe worth to test with the same stun server than ekiga :
stun.ekiga.net (for now csipsimple only support one stun server)
(oh I'm just thinking about that : checking the stun server box doesn't mean
you have stun activated, you must also fill a valid server in the stun server
field).
You can also uncheck ICE because I don't think that ekiga support ice and if
they succeed using stun csipsimple should also.
Original comment by r3gis...@gmail.com
on 21 Aug 2010 at 12:11
I set the STUN server as "stun.ekiga.net:3478".
I also test for with or without checking "ICE" and the result is the same, no
sound. Do you have any STUN server for me to test?
Original comment by runner...@gmail.com
on 21 Aug 2010 at 1:25
The current verison 0.00-12-20 has no voice on Ekiga.net account on both sides
over 3G.
However, 0.00-12-20 works perfectly on Asterisk.
I think that CSipSimple does not work on Ekiga.net account on both sides over
3G.
Original comment by runner...@gmail.com
on 23 Aug 2010 at 5:02
There is probably something special done by ekiga on ubuntu over 3G to succeed.
Hope this is not IAX else nothing will be possible to fix it quickly in
CSipSimple (for now only SIP support is planned).
What can help me is reverse engineering what is done on you ubuntu+ekiga using
3g. As my 3G carrier doesn't support SIP and besides I have no modem dongle,
I'm not able to produce tests myself. Would be nice if you can try to produce
traces for me :
As it is a linux distro here how to get network traces :
0 - open a terminal
1 - if not already done, install tcpdump : sudo apt-get install tcpdump
2 - find the interface name : list interfaces using ifconfig and find the one
with the IP address.
3 - run tcpdump -i "name-of-the-interface-found-in-2" -s 1500 -w
ekigatraces.pcap.
4 - send me (better by mail r3gis.3r at gmail dot com - in order to not diffuse
private infos on the web) the ekigatraces.pcap (available in the directory
where the command line was executed, should be home dir)
Original comment by r3gis...@gmail.com
on 23 Aug 2010 at 6:08
Issue 205 has been merged into this issue.
Original comment by r3gis...@gmail.com
on 17 Oct 2010 at 11:26
Hi guys!
my configuration works in sipdroid but I continue to test isipsimple. I'm also
receiving no sound on 3g with TCP protocol. Udp over WiFi works fine.
I'm using voxalot server to connect on port 2060 as standard isn't working with
my cellar network (vodafone cz).
I use standard codec order. In expert mode I set port in proxy and choose "use
TCP instead of udp " (the way it works with sipdroid ). Try to use udp doesn't
help either.
Original comment by xnov...@gmail.com
on 27 Oct 2010 at 7:15
@xnova : did you try to activate STUN?
See :
http://code.google.com/p/csipsimple/wiki/FAQ#The_other_party_can_hear_me_but_I_c
an_not_hear_them
Also, ensure sipdroid is not running when using csipsimple to be sure there is
no conflicts on listening ports.
P.S. : it's csipsimple not isipsimple ;) ... isipsimple is a proprietary
software for this awful proprietary platform that put users in a golden jail ;)
Original comment by r3gis...@gmail.com
on 27 Oct 2010 at 8:47
And for ekiga, I think that :
first tests from runnersam failed cause ekiga stun server was not supported
previously by pjsip sip stack (now that's ok, they did change in the stack so
that should be really better) :D
And the last point for ekiga, and for an unknown (almost unknown..) reason the
500 echo test doesn't work with other sip client than ekiga... but using
sip:*673500@ekiga.net (which is actually the same echo test but using another
way to access it work as expected).
I mark that as fixed for ekiga since should be fixed with the STUN fix done by
pjsip guys.
@xnova : if you still have the voice problem when stun is activated, please
open a new issue (if you could send me logs could be cool too ;) ).
Original comment by r3gis...@gmail.com
on 27 Oct 2010 at 8:54
Original issue reported on code.google.com by
runner...@gmail.com
on 21 Aug 2010 at 8:46