Is possible to connect 128x64px SSD1305 display do u8glib and set it for SSD1306

olleheugene / u8glib

Automatically exported from code.google.com/p/u8glib

Other

0 stars 0 forks source link

Is possible to connect 128x64px SSD1305 display do u8glib and set it for SSD1306 #140

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago

Hello,

I order UG-2864ASYGG14 display (2.42" 128x64px) with driver SSD1305.
Will work this library with driver setting for SSD1306? 
Or if you have other suggest for big display (>2.4inch) with SSD1306 driver :)

I checked datasheet, and command seem to be the same as SSD1305 (except that 
this driver is up to 132px per row).

Thank you for respond.

Original issue reported on code.google.com by radim.l...@gmail.com on 4 Feb 2013 at 10:08

GoogleCodeExporter commented 9 years ago

I do not have a display with SSD1305 controller, so i suggest to try whether it 
works or not. Ensure to use a 5V/3.3V level translation for the Uno with your 
Controller.

Original comment by olikr...@gmail.com on 4 Feb 2013 at 10:21

Added labels: Milestone-Future, Type-Enhancement
Removed labels: Type-Defect

GoogleCodeExporter commented 9 years ago

Original comment by olikr...@gmail.com on 4 Feb 2013 at 10:22

Added labels: Milestone-1.11
Removed labels: Milestone-Future

GoogleCodeExporter commented 9 years ago

Yeah, try it :) But I intend to use is in prototype design, so I need to know 
it now, because I want to send PCB to the factory... nevermind, must wait till 
the display arrives, try it and then make necessary arrangement :)

Original comment by radim.l...@gmail.com on 4 Feb 2013 at 10:30

GoogleCodeExporter commented 9 years ago

Most likely the SSD1305 will work with the SSD1306 device. Or at least with 
some minor modifications to it.

Original comment by olikr...@gmail.com on 4 Feb 2013 at 10:44

GoogleCodeExporter commented 9 years ago

Original comment by olikr...@gmail.com on 23 Feb 2013 at 6:36

Changed state: Done