Lua TX12 - Githubissues

olliw42 / mLRS

2.4 GHz & 915/868 MHz & 433 MHz/70 cm LoRa based telemetry and radio link for remote controlled vehicles

GNU General Public License v3.0

295 stars 67 forks source link

Lua TX12 #207

Closed Dwakener closed 1 month ago

Dwakener commented 2 months ago

Good afternoon. TX12 hardware gets stuck loading LUA. TX = E77-MBLKit-wle5cc

Dwakener commented 2 months ago

10:15:51 : Data read successfully 10:15:51 : Time elapsed during the read operation is: 00:00:02.783 10:16:10 : Read File: C:\mlrs\firmware\pre-release-stm32\tx-E77-MBLKit-wle5cc-400-v1.2.04.hex 10:16:10 : Number of segments: 1 10:16:10 : segment[0]: address= 0x8000000, size= 0x13268 10:16:17 : Memory Programming ... 10:16:17 : Opening and parsing file: tx-E77-MBLKit-wle5cc-400-v1.2.04.hex 10:16:17 : File : tx-E77-MBLKit-wle5cc-400-v1.2.04.hex 10:16:17 : Size : 76.60 KB 10:16:17 : Address : 0x08000000 10:16:17 : Erasing memory corresponding to segment 0: 10:16:17 : Erasing internal memory sectors [0 38] 10:16:18 : Download in Progress: 10:16:19 : File download complete 10:16:19 : Time elapsed during download operation: 00:00:02.208

Dwakener commented 1 month ago

photo_2024-07-10_12-47-52 photo_2024-07-10_12-47-49

olliw42 commented 1 month ago

many thx for the report the lua support on bw radios is always a bit of an issue, since no dev has such a radio. And there are so many of them.

yo are running mLRS-bw, and not mLRS, right?

what firmware is your radio on? You need latest OpenTx or latest EdgeTx. do you have any other script or similar running, which would eat memory away?

Dwakener commented 1 month ago

Expressel modules work stably. Regular script mLRS restarts the equipment, mLRS-bw the loading text hangs and nothing happens. Out of curiosity I watched the broadcast, there is silence on 433MHZ

Dwakener commented 1 month ago

I also looked at the jumper on the antenna, you didn’t have it in the pictures, here it is

Dwakener commented 1 month ago

EDGETX-TX12MK2 2.8.0 CFGV 221

olliw42 commented 1 month ago

upgrade your edgetx to latest, it's known t not work on that old version

Dwakener commented 1 month ago

edgetx-firmware-v2.10.2 helped !!!

olliw42 commented 1 month ago

great glad to hear it works

two general comments pl

this was obviously a support topic and not an issue report. The github repo is NOT for support. For support pl consider going to the support channels next time (rcgroups thread or discord channel)
consider readin and rereading the docs carefully in case of issues. One would have found the comment on the edgetx version there :) I mean, you sure are most welcome to raise your questions and ask for help, but it may safe you your time :)

thx for closing it