Open VivantSenior opened 2 years ago
I have LG Styler and it works.
I think that anyone that is using this integration could provide here detail of working device (Type and Model should be ok) so that we can create list. I will pin this issue to highlight request.
LG refrigerator model GSJ470DIDV, product code GC-J247SQUV_ADSQEUR working flawlessly on version 0.9.3
Working: LG Washer WM4000HWA LD Dryer DLGX4001W Now also working: LG Dehumidifier UD501KOJ5 Updated with working dehumidifier.
Working: Conditioner LG B09TS Washer LG AI DD F2V9HS9W
Working:
Refrigerator : GBB72MCUDN
Working: Refrigerator : GBB72MCUDN
Very timely posted the info. Thanks. I just needed to find out about the refrigerator from LG. I'm looking at this model GA-B509MVQM and apparently he will have the same as you. After all, they are essentially the same
Working: Washer LG F4WV408S0E
LG QuadWash XD3A15NS Dishwasher working. Thanks for your work!
working: LG Air Conditioner PM18SP.NSK LG Air Conditioner PM05SP.NSJ
Working:
LG Dryer RH90V5AV6Q
LG Washer F4WN608S1 Vivace
Does anyone have LG Dishwasher DF425HSS ?
I have a full suite of LG appliances and they all seem to be working - though some of the devices came through with unnecessary entities I'm working through (like "salt refill" on my dishwasher that doesn't take salt) but working great even still!
Refrigerator - LFXS26973S Dishwasher - LDT7808SS (aka LDT7808 stainless steel edition) Oven - LSE4617 Washer - WM4500HBA Dryer - DLEX4500b
Is LG WH27S supported?
not support dehumidifier: MD161QBK3
Working: Dehumidifier-MD171QSK1 Dehumidifier-MD161QBK1 AirPurifier-AS551DWS0
Working:
modelName: RAC_056905_WW
deviceCode: AI01
firmware: 2.6.7_RTOS_3K
modelNm: RAC_056905_WW-RAC
LG WH27S heatpump boiler does not show up on the integration after reload and reboot.
Guess that's not supported yet. Too bad because I wanted to use the status of my boiler and shower lights as trigger for the fan.
LG Vivace Washer/Dryer F2DV5S8S2
Any plan to water purifier? I want to get info that how much water is spent.
RAC_056905_WW-RAC (AC) LG clip_hna_v1.9.161
Working wonders:
Working with:
LG Fridge LG GBB62PZHMN
LG Dishwasher: DF325FP
HVAC working ( mostly )
modelName: RAC_946001_DK deviceCode: AI01 fwVer": 1.1.6 modelNm: "RAC_946001_DK model: RAC_946001_DK-RAC (AC)
modelName: RAC_493109_DK deviceCode: AI01 fwVer": 1.1.6 modelNm: RAC_493109_DK model: RAC_493109_DK-RAC (AC)
Both being managed by WIFI module PCRCUDT2
Only a few swingmodes works. Rest throws an error: Failed to call service climate. set_swing_mode.
"swing_modes": [ "VerticalOff", OK "VerticalTop", Not OK "VerticalMiddleTop1", Not OK "VerticalMiddleTop2", Not OK "VerticalMiddleBottom2", Not OK "VerticalMiddleBottom1", Not OK "VerticalBottom", Not OK "VerticalSwing", Not OK "HorizontalOff", OK
"HorizontalLeft", Not OK "HorizontalMiddleLeft", Not OK "HorizontalCenter", Not OK "HorizontalMiddleRight", Not OK "HorizontalRight", Not OK "HorizontalLeftHalf", Not OK "HorizontalRightHalf", Not OK "HorizontalSwing" No OK ],
I have:
All of them work great in HA. The features in the Thinq app that are not in HA are:
There are already some feature requests for some of these.
HVAC: LG Standard 2 (S12ET) 2,5kW and 3,5kW
RAC_056905_WW-RAC (AC)
by LG
Firmware: clip_hna_v1.9.183
Dishwasher: DF222FWS Washing machine: F2J7HY1W
Everything works fine.
Fridge LG GBB72SADFN works great in latest HA/HA-ST-Sensors.
Hi, From some comments above, I read, that the WH27S (and probably) the WH20S are not yet supported by this integration... Does anyone have some news about these devices?
I am planning to get a HeatPump for warm water - and one aspect I am looking for is the possibility to integrate the device into HomeAssistant... Either by a custom integration (Cloud, etc.) or local connection using Wifi, Modbus or anything else...
So I would really like to know, if the WH20S / WH27S would be supported - and if not, what might be required to get support for these devices :)
Else, I need to continue to search for another option...
Water Heater support was introduced by PR #420 on December 9, 2022
I can confirm that the WH27S works great and power usage is very accurate compared to the diy meter I used next to the breaker.
Hi @Dutchy-79, thanks :) I also found another "possible" device that could meet my requirements (also in size) ... but this will work with Modbus - and probably, I need to configure everything directly since there's no integration available.
Could you might share some information what exactly the LG does provide with this integration? I would like to get some kind of overview to further compare both heatpumps and their options in HA :)
If you don't want to share this here in that discussion, you can also contact me directly... :)
You mean this?
Seems to be working 95%. The only issue I can see is there's no support for the sleep mode, or a way to set a sleep timer. That's only important as the ac unit gets access to a much more quiet running mode. I'm not sure if this is an api limitation as it's a little funky to use in the app aswell, but it can atleast set a sleep timer that activates the quiet mode.
It's on my to do list to dig into this but that list just seems to keep growing lol.
Working:
- Cassette-AC:
modelName: RAC_056905_WW deviceCode: AI01 firmware: 2.6.7_RTOS_3K modelNm: RAC_056905_WW-RAC
Yeah works, but not the switch on/off LED on the AC
Air-conditioning split unit I38TKF (room temperature seems to be not available as an entity, but it properly reports the temp on the AC tab)
2RES1VE61PFD2-SS (REFRIGERATOR) by LG Firmware: clip_hna_v1.9.183
Working fine.
LG 12KG 10 Program Series 10 ezDispense Front Loading Washing Machine
WV10-1412W
The process for automating was interesting to figure out.
First put the washing in, select your cycle and options, then hold remote start until it displays On
. It can now be turned on from Home Assistant.
LG 10KG 14 Program Series 10 Inverter Control Heat Pump Condenser Dryer
DVH10-10W
Got my new fridge today and adding it was seamless.
I have two questions
Why does current & target temp show as the same, even when I change it up or down the current immediately matches the target
The internal LED has a brightness setting that I can change from the ThinQ app but there is no setting for this in the integration
That's because LG does want you to believe it is that precise. The fridge sends that info to you like this. Cheaters... ;-)
I have tried change it by a few degrees and see if it matches it immediately. Now I need to find something that will measure temp inside fridge. Wi-Fi or Zigbee any product recommendations?
I have tried change it by a few degrees and see if it matches it immediately.
LG refrigerator do not provide current temp but only target temp, so the 2 values in HA will be always equal. And this thread is just a survey, for issue or fr open a new thread, for questions move to HA community.
Thanks👍
Front Load Washing Machine - WV5-1408W and I'd assume it's bigger siblings WV5-1409W and WV5-1410W
Hello! This integration works stable on my HAOS system. I do have a refrigerator (model number LFXS26973) connected via the LG ThinQ account. My question is how to see power consumption. This one that I see on my Android application. There are more visible parameters as a piece of device information: model number, and serial number, but el. consumption is the one that I need.
LG F2V9GC9W - Excelent work all sensors! RU
account with @mail.ru
LG Airconditioner PC12ST NSJ working fine for basic controls
I have an LG washer and Dryer working with information and some controls.
WM5500HVA - 4.5 cu. ft. Stackable Smart Front Load Washer in Graphite Steel with AI Digital Dial, Steam and TurboWash360
DLHC5502V - 7.8 cu. ft. Dual Heat Pump ventless Electric Dryer with DirectDrive Motor, 6 Motion and AI Sensor Dry
AirPurifier-AS601DPT0 Working well but without control over circular fan. This model is a counter part of AirPurifier-AS551DWS0 where a rotatable circular fan is added on top of the filter fan. Can retrieve and set ON/OFF status and filter fan speed percentage + preset_mode, namely 33%, 66%, 100%, POWER(turbo), and AUTO. Sensors available and functioning as intended are Filter remaining life (%), PM 1, PM 2.5 and PM 10. While fan.speed_increase and fan.speed_decrease service command works, due to hardware limitation, only 0%(off), 33%, 66%, 100% steps can be achieved, it is not as convenient as setting the percentage directly.
It would be very interesting if we can add more control over the hardware.
Hi,
is there a list of supported devices by this custom component?
Best, Viv