search

open-ephys / headstage-test-board

Circuit board for testing headstages
1 stars 1 forks source link

head stage test board Gerber files have a hole through a trace #1

Open fjkdasilva opened 5 years ago

fjkdasilva commented 5 years ago

I recently submitted the gerber files found in: https://github.com/open-ephys/headstage-test-board to Suntone's Value Proto per instructions in the above site. I received an email from them stating that there is a hole through one of the traces so they put a hold on the board until the issue is resolve. Please see attached photos sent from Suntone: w-10062158_btm-view w-10062158_top view.

Here is a copy of their msg: During our preliminary review of your board files we noticed that there is one (1) NC/Drill Hole location that is going through a Trace and/or looks out of place. The NC/Drill Tool #T1 > 0.0236" > qty. 29 > PTH is the one that is involved.

If someone is able to edit this file and fix the problem, please let me know. I have purchased all the other parts and am only waiting for the PCB. Thanks in advance for your help! Flavio da Silva, TNE Lab University of Minnesota Medical School, Department of psychiatry dasilvaf@umn.edu (602)380-7076

fjkdasilva commented 5 years ago

Anybody?

jsiegle commented 5 years ago

That's definitely a mistake. It seems like it's only a problem in the Gerber file (not the original Eagle .brd file). I uploaded a new version...can you check and see if that one looks ok?

fjkdasilva commented 5 years ago

Yay!!! Thanks for the reply! Your efforts are very appreciated. Thanks!

On Mon, Feb 4, 2019 at 7:29 PM Josh Siegle notifications@github.com wrote:

That's definitely a mistake. It seems like it's only a problem in the Gerber file (not the original Eagle .brd file). I uploaded a new version...can you check and see if that one looks ok?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/open-ephys/headstage-test-board/issues/1#issuecomment-460480393, or mute the thread https://github.com/notifications/unsubscribe-auth/Af_sqchXgJvwlc6GhtN-PMesbzdr6UXxks5vKN5ngaJpZM4aW8Ln .