Install a OpenPower Habanero system with habenaro_update.pnor which is built from op-build master-next branch having commit id: f70946e5cd47929fd1e32ee2a3915d42809459b0. Problem statement: when system is in runtime, bmc cold reset resulting sensors command failure and makes the system crash one time and also results in lot of xscom write and read errors.

System is in below firmware level:

 Product Name          : OpenPOWER Firmware
 Product Version       : open-power-habanero-f70946e
 Product Extra         :    buildroot-bc248fa
 Product Extra         :    skiboot-5.2.2
 Product Extra         :    hostboot-b31723b-ccd5752
 Product Extra         :    linux-4.4.9-openpower2-8b0d756
 Product Extra         :    petitboot-v1.0.1-1c3bb54
 Product Extra         :    habanero-xml-5a2a541-0bc2709
 Product Extra         :    occ-19a3ebc
 Product Extra         :    hostboot-binaries-7f593a3
 Product Extra         :    c

Reproduction steps:

Install a habanero system with habanero_update.pnor which is built from op-build master-next branch having above commit id.
During system is in runtime, execute sensors command.
```
# sensors
```

No sensors found! Make sure you loaded all the kernel drivers you need.

Try sensors-detect to find out which these are.

modprobe ibmpowernv

lsmod | grep -i powernv

ibmpowernv 6123 0 powernv_flash 5610 0 ipmi_powernv 5611 0 mtd 65409 3 powernv_flash,ofpart ipmi_msghandler 66801 2 ipmi_powernv,ipmi_devintf powernv_rng 2617 0

sensors

ibmpowernv-isa-0000 Adapter: ISA adapter Core 0-7: +53.0°C
Core 8-15: +53.0°C
Core 16-23: +51.0°C
Core 24-31: +53.0°C
Core 32-39: +53.0°C
Core 40-47: +56.0°C
Core 48-55: +56.0°C
Core 56-63: +57.0°C
Core 64-71: +56.0°C
Core 72-79: +55.0°C
Centaur 0: +40.0°C
Centaur 1: +44.0°C
Centaur 4: +38.0°C
Centaur 5: +40.0°C


Here sensors command will work fine as expected.
3. When system is in runtime, issue BMC cold reset.
4. After BMC comes up execute sensors command, it is failed to read centaur memory buffer temperatures and also resulted in system hang one time.

[SOL Session operational. Use ~? for help]

[root@ite037 ~]# [root@ite037 ~]# [root@ite037 ~]# sensors ibmpowernv-isa-0000 Adapter: ISA adapter Core 0-7: +51.0°C
Core 8-15: +51.0°C
Core 16-23: +50.0°[1164863065631,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1164863069433,6] IPMI: dropping non severe PEL event C
Core 24-31:[1164865357782,3] MFSI 0:0: XSCOM error -6 writing OPB CMD +[1164866382370,3] MFSI 0:0: Access error on port 3, stat=000100000000 51.0°C [1164868396591,3] CENTAUR 80000000: MFSI write error -6 writing CMD

Core 32-39: +53.0°C
Core 40-47: +[1164869896538,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1164869899729,6] IPMI: dropping non severe PEL event [1164871893864,3] MFSI 0:0: XSCOM error -6 writing OPB CMD 55.0[1164872916335,3] MFSI 0:0: Access error on port 2, stat=000100000000 °C
Co[1164873962559,3] CENTAUR 80000001: MFSI write error -6 writing CMD re 48-55: +55.0°C
Core 56-63: +56.0°C
Core 64-7[1164876098575,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1164876101684,6] IPMI: dropping non severe PEL event [1164878168013,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1164879265749,3] MFSI 0:0: Access error on port 7, stat=000100000000 1: +55.0°C[1164881289162,3] CENTAUR 80000004: MFSI write error -6 writing CMD

Core 72-79: +55.0°C
ERROR: Can't get value of sub[1164882435759,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1164882438856,6] IPMI: dropping non severe PEL event [1164884697087,3] MFSI 0:0: XSCOM error -6 writing OPB CMD feat[1164885710787,3] MFSI 0:0: Access error on port 6, stat=000100000000 ure temp1[1164887726957,3] CENTAUR 80000005: MFSI write error -6 writing CMD 1_input: I/O error Centaur 0: N/A
ERROR: Can't get value of subfeature temp12_input: I/O error Centaur 1: N/A
ERROR: Can't get value of subfeature temp13_input: I/O error Centaur 4: N/A
ERROR: Can't get value of subfeature temp14_input: I/O error Centaur 5: N/A

[root@ite037 ~]# echo yes | sensors-detect

sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)

DMI data unavailable, please consider installing dmidecode 2.7

or later for better results.

This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): modprobe: FATAL: Module cpuid not found. Failed to load module cpuid. Silicon Integrated Systems SIS5595... [1174686400465,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174686404184,6] IPMI: dropping non severe PEL event [1174687886495,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174689003292,3] MFSI 0:0: Access error on port 3, stat=000100000000

VIA VT82[1174690028859,3] CENTAUR 80000000: MFSI write error -6 writing CMD C686 Integr[1174692019465,3] I2C: Failed to disable the sensor cache ated Sensors... No VIA VT82[1174693169246,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174693172746,6] IPMI: dropping non severe PEL event [1174695474749,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174696499443,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174697530161,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174698550250,3] I2C: Failed to read the MODE_REG [1174699857021,3] I2C: Failed to program the MODE_REG [1174701466831,3] SLW: Stuck with odd generation ! [1174701981397,3] SLW: Register state: [1174702011269,3] SLW: e0000 = 0201000800000ad8 [1174703062278,3] SLW: e0001 = 8000ffffffffffff [1174704058799,3] SLW: e0002 = 0000000000000000 [1174705199761,3] SLW: e0003 = 00bff00000000000 [1174705236100,3] SLW: e0004 = 0000000000000000 [1174706444359,3] SLW: e0005 = 0000000000000000 [1174707482644,3] SLW: e0006 = 0000000019bf70cb [1174708600287,3] SLW: e0007 = 000000000000000a [1174708638074,3] SLW: e0008 = 0000000800000000 [1174710040383,3] SLW: e0009 = 0000000000000000 [1174711180527,3] SLW: e000a = 0000000000000000 [1174712227156,3] SLW: e000b = 0000000000000000 [1174712264625,3] SLW: e000c = 0000000000000000 [1174713362129,3] SLW: e000d = 0000000000000000 [1174715211208,3] SLW: e000e = 0000000000000000 [1174716323263,3] SLW: e000f = 0005003a70000000 [1174716362236,3] SLW: e0010 = 000800000ad40001 [1174717427397,3] SLW: e0011 = 0000000000000000 [1174718656169,3] SLW: e0012 = 0000000000000000 [1174719804164,3] SLW: e0013 = 0000000000000000 [1174721034618,3] SLW: e0014 = 0000000070000904 [1174721071343,3] SLW: e0015 = 0000000300000000 [1174722193158,3] SLW: e0016 = 0000000280002000 [1174723402559,3] SLW: e0017 = c200510500000000 [1174723441035,3] SLW: e0018 = b400000300000000 [1174724477929,3] SLW: e0019 = 0000000000000000 [1174725904959,3] XSCOM: read error gcid=0x0 pcb_addr=0x5001c stat=0x7 [1174725907904,6] IPMI: dropping non severe PEL event [1174728076430,3] SLW: XSCOM error -6 reading reg 0x5001c 31 Integrated Sensors... [1174729152489,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174729155586,6] IPMI: dropping non severe PEL event [1174731195707,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174732243764,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174734252729,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174734305270,3] I2C: Failed to read the MODE_REG [1174735447151,3] I2C: Failed to program the MODE_REG No AMD K8 t[1174736524304,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174736527377,6] IPMI: dropping non severe PEL event [1174738628692,3] MFSI 0:0: XSCOM error -6 writing OPB CMD herm[1174739732746,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174742129860,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174742179909,3] I2C: Failed to read the MODE_REG [1174743188398,3] I2C: Failed to program the MODE_REG al sensors... [1174744328459,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174744331580,6] IPMI: dropping non severe PEL event [1174746581009,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174747641025,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174749657264,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174749708463,3] I2C: Failed to read the MODE_REG [1174750763949,3] I2C: Failed to program the MODE_REG No AM[1174751835679,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174751838742,6] IPMI: dropping non severe PEL event [1174753918593,3] MFSI 0:0: XSCOM error -6 writing OPB CMD D Fa[1174760158730,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174762373359,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174771819673,3] I2C: Failed to read the MODE_REG [1174771859439,3] I2C: Failed to program the MODE_REG mily 10h [1174772971975,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174772975036,6] IPMI: dropping non severe PEL event [1174774989925,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174782539972,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174783891162,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174784917823,3] I2C: Failed to read the MODE_REG [1174785932744,3] I2C: Failed to program the MODE_REG thermal sensors... [1174787120599,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174787123679,6] IPMI: dropping non severe PEL event [1174789125781,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174790151567,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174791819786,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174792855399,3] I2C: Failed to read the MODE_REG [1174793896222,3] I2C: Failed to program the MODE_REG No AMD Famil[1174794982060,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174794985116,6] IPMI: dropping non severe PEL event [1174797202975,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174798190172,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174800246181,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174801282417,3] I2C: Failed to read the MODE_REG [1174803091306,3] I2C: Failed to program the MODE_REG y 11h thermal sensors... [1174804219466,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174804222533,6] IPMI: dropping non severe PEL event [1174806220590,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174807657106,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174808686572,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174809749061,3] I2C: Failed to read the MODE_REG [1174810755203,3] I2C: Failed to program the MODE_REG No AMD[1174811896520,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174811899583,6] IPMI: dropping non severe PEL event [1174813957252,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174814954223,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174815994223,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174817143916,3] I2C: Failed to read the MODE_REG [1174818160106,3] I2C: Failed to program the MODE_REG Family 12h and 14h thermal s[1174819237690,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174819240748,6] IPMI: dropping non severe PEL event [1174821334366,3] MFSI 0:0: XSCOM error -6 writing OPB CMD enso[1174822672207,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174823728354,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174824746062,3] I2C: Failed to read the MODE_REG [1174825786168,3] I2C: Failed to program the MODE_REG rs... N[1174826897551,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174826900622,6] IPMI: dropping non severe PEL event [1174828997165,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174830137614,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174838552906,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174838603971,3] I2C: Failed to read the MODE_REG [1174839621615,3] I2C: Failed to program the MODE_REG o AMD Family 15h thermal sen[1174840749776,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174840752872,6] IPMI: dropping non severe PEL event [1174842878100,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174843905983,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174845960437,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174847009599,3] I2C: Failed to read the MODE_REG [1174847046594,3] I2C: Failed to program the MODE_REG sors... [1174848268790,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174848271889,6] IPMI: dropping non severe PEL event [1174854125449,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174855355738,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174857385448,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174857436493,3] I2C: Failed to read the MODE_REG [1174858509327,3] I2C: Failed to program the MODE_REG No AMD Family 15h power[1174859600745,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174859603823,6] IPMI: dropping non severe PEL event [1174861640525,3] MFSI 0:0: XSCOM error -6 writing OPB CMD sen[1174862677298,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174864824970,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174864886232,3] I2C: Failed to read the MODE_REG [1174865881277,3] I2C: Failed to program the MODE_REG sors... [1174867009443,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174867012498,6] IPMI: dropping non severe PEL event [1174869508367,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174870573384,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174872656990,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174686179705,3] CHIPTOD: Chip to TB timeout [1174686181567,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a14000 [1174686183208,3] CHIPTOD: OPAL: Resync timebase failed on CPU 0x006d [1174964157893,3] I2C: Failed to read the MODE_REG [1174965180881,3] I2C: Failed to program the MODE_REG No AMD Family 16h power sensors... [1174966913807,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174966916916,6] IPMI: dropping non severe PEL event [1174970200948,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174972600548,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174976232147,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174977977221,3] I2C: Failed to read the MODE_REG [1174978015245,3] I2C: Failed to program the MODE_REG No I[1174980486127,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174980490099,6] IPMI: dropping non severe PEL event [1174982642543,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174983907936,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174986054063,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174987144178,3] I2C: Failed to read the MODE_REG [1174987184250,3] I2C: Failed to program the MODE_REG ntel digital [1174988294128,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174988297248,6] IPMI: dropping non severe PEL event [1174990338787,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174991658479,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1174992685254,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1174993757491,3] I2C: Failed to read the MODE_REG [1174994752248,3] I2C: Failed to program the MODE_REG thermal sensor... [1174995838699,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1174995841761,6] IPMI: dropping non severe PEL event [1174997959192,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1174999061471,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175000079283,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175001233615,3] I2C: Failed to read the MODE_REG [1175002241407,3] I2C: Failed to program the MODE_REG No Intel AM[1175003369670,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175003372721,6] IPMI: dropping non severe PEL event [1175005424679,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175006853325,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175007893152,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175008917986,3] I2C: Failed to read the MODE_REG [1175009922697,3] I2C: Failed to program the MODE_REG B FB-DIMM thermal sensor... [1175010980052,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175010983120,6] IPMI: dropping non severe PEL event [1175013029159,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175014059162,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175015141014,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175020086991,3] I2C: Failed to read the MODE_REG [1175021168575,3] I2C: Failed to program the MODE_REG No VI[1175022555614,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175022558709,6] IPMI: dropping non severe PEL event [1175024656559,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175025708396,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175026765647,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175027864699,3] I2C: Failed to read the MODE_REG [1175028860725,3] I2C: Failed to program the MODE_REG A C7 thermal sensor... [1175029949962,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175029953009,6] IPMI: dropping non severe PEL event [1175032056399,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175033075441,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175034099936,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175035191357,3] I2C: Failed to read the MODE_REG [1175036189519,3] I2C: Failed to program the MODE_REG [1175037777243,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175037780338,6] IPMI: dropping non severe PEL event [1175040043678,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175041150877,3] MFSI 0:0: Access error on port 3, stat=000100000000 No VIA Nano [1175042283001,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175044364824,3] I2C: Failed to read the MODE_REG [1175044402755,3] I2C: Failed to program the MODE_REG thermal sensor..[1175045714991,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175045718154,6] IPMI: dropping non severe PEL event [1175047739338,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175048745015,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175049786855,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175050806607,3] I2C: Failed to read the MODE_REG [1175051812863,3] I2C: Failed to program the MODE_REG . [1175054656144,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175054659197,6] IPMI: dropping non severe PEL event [1175073782505,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175074839860,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175076859403,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175076913263,3] I2C: Failed to read the MODE_REG [1175078075225,3] I2C: Failed to program the MODE_REG No

Some Super I/O ch[1175079170522,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175079173615,6] IPMI: dropping non severe PEL event [1175081227224,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175082269084,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175089437295,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175090460907,3] I2C: Failed to read the MODE_REG [1175090500345,3] I2C: Failed to program the MODE_REG ips contain embedded sensors.[1175091630709,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175091633831,6] IPMI: dropping non severe PEL event [1175096439099,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175097455966,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175099874179,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175100902597,3] I2C: Failed to read the MODE_REG [1175100943774,3] I2C: Failed to program the MODE_REG We have to w[1175102104747,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175102107839,6] IPMI: dropping non severe PEL event [1175104567055,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175105563629,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175106600010,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175107620652,3] I2C: Failed to read the MODE_REG [1175108658667,3] I2C: Failed to program the MODE_REG rite to standard I/O ports t[1175109859605,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175109862850,6] IPMI: dropping non severe PEL event [1175111823023,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175112856879,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175117804230,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175118929014,3] I2C: Failed to read the MODE_REG [1175119938973,3] I2C: Failed to program the MODE_REG o probe them. This is usually[1175121114357,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175121117581,6] IPMI: dropping non severe PEL event [1175123171366,3] MFSI 0:0: XSCOM error -6 writing OPB CMD safe. Do you want [1175124303040,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175126324118,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175127352191,3] I2C: Failed to read the MODE_REG [1175127393409,3] I2C: Failed to program the MODE_REG to scan f[1175128495151,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175128498095,6] IPMI: dropping non severe PEL event [1175130541833,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175131553061,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175132801776,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175133839373,3] I2C: Failed to read the MODE_REG [1175135219511,3] I2C: Failed to program the MODE_REG or Super I/O sensors? (YES/no[1175136295810,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175136298773,6] IPMI: dropping non severe PEL event [1175138423239,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175139523391,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175140549299,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175141572480,3] I2C: Failed to read the MODE_REG [1175142574414,3] I2C: Failed to program the MODE_REG ): Probing for Super-I/O at 0[1175143674943,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175143677887,6] IPMI: dropping non severe PEL event [1175145808222,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175146835571,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175147830442,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175148921031,3] I2C: Failed to read the MODE_REG [1175150223871,3] I2C: Failed to program the MODE_REG x2e/0x2f Trying family Nati[1175151364161,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175151367139,6] IPMI: dropping non severe PEL event [1175153426583,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175154455695,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175155608629,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175156589679,3] I2C: Failed to read the MODE_REG [1175157597489,3] I2C: Failed to program the MODE_REG onal Semiconductor/ITE'... [1175158684016,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175158686959,6] IPMI: dropping non severe PEL event [1175160748142,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175161771552,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175163830140,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175163880431,3] I2C: Failed to read the MODE_REG [1175164905281,3] I2C: Failed to program the MODE_REG No Trying family[1175166291659,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175166294607,6] IPMI: dropping non severe PEL event [1175168348998,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175169390643,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175170743581,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175171771887,3] I2C: Failed to read the MODE_REG [1175172765551,3] I2C: Failed to program the MODE_REG SMSC'... [1175173824983,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175173827931,6] IPMI: dropping non severe PEL event [1175175906424,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175177035418,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175179106228,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175179158377,3] I2C: Failed to read the MODE_REG [1175180156475,3] I2C: Failed to program the MODE_REG No Trying [1175181545221,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175181548162,6] IPMI: dropping non severe PEL event [1175183581219,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175189494430,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175192367490,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175192421239,3] I2C: Failed to read the MODE_REG [1175193475211,3] I2C: Failed to program the MODE_REG family VIA/Winbond/Nuvoton/F[1175194549328,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175194552281,6] IPMI: dropping non severe PEL event [1175196899995,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175197950490,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175199937455,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175199990083,3] I2C: Failed to read the MODE_REG [1175201106028,3] I2C: Failed to program the MODE_REG intek'... No T[1175202190605,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175202193564,6] IPMI: dropping non severe PEL event [1175204206917,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175205227231,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175207332488,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175208356838,3] I2C: Failed to read the MODE_REG [1175208395254,3] I2C: Failed to program the MODE_REG rying family [1175209541425,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175209544360,6] IPMI: dropping non severe PEL event [1175211900141,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175212920047,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175213956287,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175214977273,3] I2C: Failed to read the MODE_REG [1175215965171,3] I2C: Failed to program the MODE_REG ITE'... [1175217137560,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175217140540,6] IPMI: dropping non severe PEL event [1175219164578,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175220212054,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175221252844,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175222383766,3] I2C: Failed to read the MODE_REG [1175223457960,3] I2C: Failed to program the MODE_REG No Probing [1175224513277,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175224516212,6] IPMI: dropping non severe PEL event [1175227937165,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175228982757,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175230980554,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175231032990,3] I2C: Failed to read the MODE_REG [1175232258982,3] I2C: Failed to program the MODE_REG for Super-I/O at 0x4e/0x4f T[1175233313471,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175233316435,6] IPMI: dropping non severe PEL event [1175235395818,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175236431258,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175240119937,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175240171096,3] I2C: Failed to read the MODE_REG [1175241155954,3] I2C: Failed to program the MODE_REG rying family National Semico[1175242581711,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175242584670,6] IPMI: dropping non severe PEL event [1175244635313,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175245652439,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175247842316,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175247894660,3] I2C: Failed to read the MODE_REG [1175248911277,3] I2C: Failed to program the MODE_REG nductor/ITE'... [1175249963006,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175249965954,6] IPMI: dropping non severe PEL event [1175252022432,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175253094016,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175255173926,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175255225781,3] I2C: Failed to read the MODE_REG [1175256293823,3] I2C: Failed to program the MODE_REG No Trying familySMSC'... [1175257838474,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175257841423,6] IPMI: dropping non severe PEL event [1175260357909,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175261386900,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175262516913,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175263781866,3] I2C: Failed to read the MODE_REG [1175264805178,3] I2C: Failed to program the MODE_REG [1175265891343,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175265894290,6] IPMI: dropping non severe PEL event [1175267952356,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175269018577,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175271101243,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175272178287,3] I2C: Failed to read the MODE_REG [1175272219742,3] I2C: Failed to program the MODE_REG No Trying family VIA[1175273753630,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175273756579,6] IPMI: dropping non severe PEL event [1175275789446,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175276819606,3] MFSI 0:0: Access error on port 3, stat=000100000000 /Winbond/Nuvoton/Fintek'... [1175278932557,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175279977865,3] I2C: Failed to read the MODE_REG [1175280989593,3] I2C: Failed to program the MODE_REG [1175281069803,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175281072760,6] IPMI: dropping non severe PEL event [1175283156589,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175284250692,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175286315599,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175287343787,3] I2C: Failed to read the MODE_REG [1175287382210,3] I2C: Failed to program the MODE_REG No Trying famil[1175288832829,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175288835898,6] IPMI: dropping non severe PEL event [1175290953322,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175291984780,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175294055560,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175294108931,3] I2C: Failed to read the MODE_REG [1175295205492,3] I2C: Failed to program the MODE_REG yITE'... [1175296287126,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175296290063,6] IPMI: dropping non severe PEL event [1175298404007,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175299461257,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175301627060,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175301677872,3] I2C: Failed to read the MODE_REG [1175302724815,3] I2C: Failed to program the MODE_REG No

Some[1175304366089,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175304369058,6] IPMI: dropping non severe PEL event [1175306411543,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175307437285,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175309528526,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175309580121,3] I2C: Failed to read the MODE_REG [1175310583595,3] I2C: Failed to program the MODE_REG systems (mainly servers) imp[1175311672430,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175311675368,6] IPMI: dropping non severe PEL event [1175313859608,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175314932733,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175317985248,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175318037354,3] I2C: Failed to read the MODE_REG [1175320054536,3] I2C: Failed to program the MODE_REG lement IPMI, a set of common [1175321253794,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175321256815,6] IPMI: dropping non severe PEL event [1175323253783,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175324399451,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175326421095,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175326473439,3] I2C: Failed to read the MODE_REG [1175327466557,3] I2C: Failed to program the MODE_REG interfaces through which sys[1175332476528,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175332479545,6] IPMI: dropping non severe PEL event [1175334842276,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175335842143,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175337958058,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175338008687,3] I2C: Failed to read the MODE_REG [1175347113303,3] I2C: Failed to program the MODE_REG tem health data may be retrie[1175348208031,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175348211022,6] IPMI: dropping non severe PEL event [1175355901465,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175356926095,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175358961722,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175360158350,3] I2C: Failed to read the MODE_REG [1175360199036,3] I2C: Failed to program the MODE_REG ved, amongst other things. W[1175361288543,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175361291504,6] IPMI: dropping non severe PEL event [1175363369663,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175364433635,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175366786166,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175367820840,3] I2C: Failed to read the MODE_REG [1175367860149,3] I2C: Failed to program the MODE_REG e first try to get the inform[1175368988260,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175368991214,6] IPMI: dropping non severe PEL event [1175371275563,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175372299419,3] MFSI 0:0: Access error on port 3, stat=000100000000 [1175374316673,3] CENTAUR 80000000: MFSI write error -6 writing CMD [1175375469039,3] I2C: Failed to read the MODE_REG [1175375508086,3] I2C: Failed to program the MODE_REG ation from SMBIOS. If we don'[1175376760030,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175376763028,6] IPMI: dropping non severe PEL event [1175378751129,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175379787409,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175382227239,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175382278384,3] I2C: Failed to disable the sensor cache t find it th[1175383340166,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175383343119,6] IPMI: dropping non severe PEL event [1175385419473,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175386503476,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175388532323,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175388586521,3] I2C: Failed to read the MODE_REG [1175389606390,3] I2C: Failed to program the MODE_REG ere, we have to read from arb[1175390930132,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175390933150,6] IPMI: dropping non severe PEL event [1175393006318,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175394033964,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175395076356,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175396439559,3] I2C: Failed to read the MODE_REG [1175397461764,3] I2C: Failed to program the MODE_REG itrary I/O ports to probe for[1175398551694,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175398554623,6] IPMI: dropping non severe PEL event [1175400645099,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175401679783,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175403814409,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175403867634,3] I2C: Failed to read the MODE_REG [1175404984834,3] I2C: Failed to program the MODE_REG such interfaces. This is no[1175412770015,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175412772964,6] IPMI: dropping non severe PEL event [1175414820297,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175415928062,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175418027850,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175418077903,3] I2C: Failed to read the MODE_REG [1175419144477,3] I2C: Failed to program the MODE_REG rmally safe. Do you want to s[1175424175407,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175424178393,6] IPMI: dropping non severe PEL event [1175426551076,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175427614891,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175429598783,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175429649468,3] I2C: Failed to read the MODE_REG [1175430652913,3] I2C: Failed to program the MODE_REG can for IPMI interfaces? (YE[1175887904545,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175887907551,6] IPMI: dropping non severe PEL event [1175900718383,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175902476981,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175904381455,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175906027494,3] I2C: Failed to read the MODE_REG [1175923326326,3] I2C: Failed to program the MODE_REG S/no): Probing for IPMI BMC [1175924462863,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175924465844,6] IPMI: dropping non severe PEL event [1175926525568,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175927563567,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175937355083,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175939550457,3] I2C: Failed to read the MODE_REG [1175941078339,3] I2C: Failed to program the MODE_REG KCS' at 0xca0... [1175942939562,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175942942565,6] IPMI: dropping non severe PEL event [1175952747526,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175955095815,3] MFSI 0:0: Access error on port 2, stat=000100000000 Succ[1175956873393,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175960480015,3] I2C: Failed to read the MODE_REG [1175960532623,3] I2C: Failed to program the MODE_REG ess! (confi[1175962412397,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175962415343,6] IPMI: dropping non severe PEL event [1175965916929,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175967886159,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175969817026,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175972790496,3] I2C: Failed to read the MODE_REG [1175973809407,3] I2C: Failed to program the MODE_REG dence 4, driverto-be-writte[1175974960063,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175974963044,6] IPMI: dropping non severe PEL event [1175977072207,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175978167581,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175980319566,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175980382132,3] I2C: Failed to read the MODE_REG [1175981437437,3] I2C: Failed to program the MODE_REG n') Probing for IPMI BMC SM[1175982551134,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175982554063,6] IPMI: dropping non severe PEL event [1175984965455,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175986003298,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175988033490,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175989074581,3] I2C: Failed to read the MODE_REG [1175989125729,3] I2C: Failed to program the MODE_REG IC' at 0xca8.[1175990491715,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175990494671,6] IPMI: dropping non severe PEL event [1175992512248,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1175993545323,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1175994697139,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1175995755277,3] I2C: Failed to read the MODE_REG [1175996814269,3] I2C: Failed to program the MODE_REG .. Succes[1175997921471,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1175997924426,6] IPMI: dropping non severe PEL event [1176007159087,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176009205902,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176011290271,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176012324420,3] I2C: Failed to read the MODE_REG [1176017352507,3] I2C: Failed to program the MODE_REG s! (confidence 4, driver[1176018429603,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176018432550,6] IPMI: dropping non severe PEL event [1176020531149,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176021552561,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176023579711,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176023640771,3] I2C: Failed to read the MODE_REG [1176024654215,3] I2C: Failed to program the MODE_REG to-be-written')

Some har[1176025795087,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176025798025,6] IPMI: dropping non severe PEL event [1176028031113,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176029056191,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176031467842,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176032553925,3] I2C: Failed to read the MODE_REG [1176032602334,3] I2C: Failed to program the MODE_REG dware monitoring chips are ac[1176033728482,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176033731411,6] IPMI: dropping non severe PEL event [1176035802767,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176036835919,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176038859007,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176039891183,3] I2C: Failed to read the MODE_REG [1176039939431,3] I2C: Failed to program the MODE_REG [1174988260198,3] CHIPTOD: Chip to TB timeout [1174988261509,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a14000 [1174988262726,3] CHIPTOD: OPAL: Resync timebase failed on CPU 0x0058 cessible through the ISA I/O ports.[1176044521189,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176044524143,6] IPMI: dropping non severe PEL event [1176046909969,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176047937455,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176049970215,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176051027411,3] I2C: Failed to read the MODE_REG [1176051070965,3] I2C: Failed to program the MODE_REG

We have to write to arbitra[1176052171093,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176052174047,6] IPMI: dropping non severe PEL event [1176054201623,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176055233504,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176057304774,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176058431628,3] I2C: Failed to read the MODE_REG [1176058471706,3] I2C: Failed to program the MODE_REG ry I/O ports to probe them. T[1176059593868,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176059596823,6] IPMI: dropping non severe PEL event [1176062052069,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176063108769,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176065138408,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176065189247,3] I2C: Failed to read the MODE_REG [1176066304726,3] I2C: Failed to program the MODE_REG his is usually safe though. [1176067429308,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176067432271,6] IPMI: dropping non severe PEL event [1176069562730,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176070590235,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176072689465,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176072742511,3] I2C: Failed to read the MODE_REG [1176073747893,3] I2C: Failed to program the MODE_REG Yes, you do have ISA I/O port[1176074890893,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176074893846,6] IPMI: dropping non severe PEL event [1176077482582,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176078503318,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176080553066,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176080605679,3] I2C: Failed to read the MODE_REG [1176081679700,3] I2C: Failed to program the MODE_REG s even if you do not have any[1176082763260,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176082766249,6] IPMI: dropping non severe PEL event [1176088709658,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176089738799,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176092174708,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176092225279,3] I2C: Failed to read the MODE_REG [1176093299030,3] I2C: Failed to program the MODE_REG

ISA slots! Do you want to s[1176094390700,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176094393667,6] IPMI: dropping non severe PEL event [1176096458812,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176097552822,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176099581062,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176099633285,3] I2C: Failed to read the MODE_REG [1176100638471,3] I2C: Failed to program the MODE_REG can the ISA I/O ports? (YES/n[1176101740079,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176101743953,6] IPMI: dropping non severe PEL event [1176103832511,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176104950197,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176105999666,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176107394214,3] I2C: Failed to read the MODE_REG [1176108399742,3] I2C: Failed to program the MODE_REG o): Probing for National Sem[1176109647215,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176109657567,6] IPMI: dropping non severe PEL event [1176111670252,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176112776533,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176114800767,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176114863361,3] I2C: Failed to read the MODE_REG [1176115875092,3] I2C: Failed to program the MODE_REG iconductor LM78' at 0x290... [1176117212563,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176117222736,6] IPMI: dropping non severe PEL event [1176119091445,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176120110503,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176122300975,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176122388412,3] I2C: Failed to read the MODE_REG [1176123756121,3] I2C: Failed to program the MODE_REG No Probing forNation[1176124862235,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176124872575,6] IPMI: dropping non severe PEL event [1176126934473,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176128014958,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176130017663,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176131066274,3] I2C: Failed to read the MODE_REG [1176131115908,3] I2C: Failed to program the MODE_REG al Semiconductor LM79' at 0x2[1176132268160,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176132278961,6] IPMI: dropping non severe PEL event [1176134417585,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176136553662,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176139659119,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176140695821,3] I2C: Failed to read the MODE_REG [1176140746155,3] I2C: Failed to program the MODE_REG 90... N[1176141921569,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176141931179,6] IPMI: dropping non severe PEL event [1176144320436,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176145358906,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176146373478,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176147416429,3] I2C: Failed to read the MODE_REG [1176148492450,3] I2C: Failed to program the MODE_REG o Probing for Winbond W8378[1176149607274,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176149617688,6] IPMI: dropping non severe PEL event [1176151651496,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176152688207,3] MFSI 0:0: Access error on port 2, stat=000100000000 1D' at 0x290.[1176154202638,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176156268386,3] I2C: Failed to read the MODE_REG [1176156319728,3] I2C: Failed to program the MODE_REG .. [1176157540093,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176157550190,6] IPMI: dropping non severe PEL event [1176163256297,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176164384115,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176165441919,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176166477095,3] I2C: Failed to read the MODE_REG [1176167488766,3] I2C: Failed to program the MODE_REG No Probing forWinbond[1176169038624,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176169049330,6] IPMI: dropping non severe PEL event [1176171112971,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176172258015,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176174395659,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176175435591,3] I2C: Failed to read the MODE_REG [1176175481647,3] I2C: Failed to program the MODE_REG W83782D' at 0x290... [1176176638291,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176176648979,6] IPMI: dropping non severe PEL event [1176178650224,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176179756703,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176181772575,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176182807561,3] I2C: Failed to read the MODE_REG [1176182857077,3] I2C: Failed to program the MODE_REG No[1176184404020,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176184414633,6] IPMI: dropping non severe PEL event [1176186499008,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176187568171,3] MFSI 0:0: Access error on port 2, stat=000100000000

Lastly, w[1176188667733,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176190762710,3] I2C: Failed to read the MODE_REG [1176190808094,3] I2C: Failed to program the MODE_REG e can probe the [1176191908268,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176191918001,6] IPMI: dropping non severe PEL event [1176193948009,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176195047247,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176196101410,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176197114607,3] I2C: Failed to read the MODE_REG [1176198133871,3] I2C: Failed to program the MODE_REG I2C/SMBus adapters for connec[1176199626456,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176199637143,6] IPMI: dropping non severe PEL event [1176201715943,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176202757980,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176203820315,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176204941877,3] I2C: Failed to read the MODE_REG [1176205940412,3] I2C: Failed to program the MODE_REG ted hardware monitoring devi[1176207114468,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176207125919,6] IPMI: dropping non severe PEL event [1176209170435,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176210520933,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176211639914,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176212687604,3] I2C: Failed to read the MODE_REG [1176213779644,3] I2C: Failed to program the MODE_REG ces. This is the most risky p[1176215215983,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176215226648,6] IPMI: dropping non severe PEL event [1176217322086,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176218400780,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176219450735,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176220552135,3] I2C: Failed to read the MODE_REG [1176221642063,3] I2C: Failed to program the MODE_REG art, and while it works reas[1176222888726,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176222898863,6] IPMI: dropping non severe PEL event [1176224996079,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176226042557,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176227087717,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176228123718,3] I2C: Failed to read the MODE_REG [1176229134456,3] I2C: Failed to program the MODE_REG onably well on most systems, [1176234327355,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176234337166,6] IPMI: dropping non severe PEL event [1176236429339,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176237471674,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176239482499,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176239548615,3] I2C: Failed to read the MODE_REG [1176240608563,3] I2C: Failed to program the MODE_REG it has been reported to cause[1176241760196,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176241770834,6] IPMI: dropping non severe PEL event [1176243860723,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176244941451,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176247120476,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176248151672,3] I2C: Failed to read the MODE_REG [1176248203275,3] I2C: Failed to program the MODE_REG trouble on some systems. D[1176249350591,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176249360987,6] IPMI: dropping non severe PEL event [1176252443151,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176253480265,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176255640303,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176256897696,3] I2C: Failed to read the MODE_REG [1176256948076,3] I2C: Failed to program the MODE_REG o you want to[1176267597426,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176267606692,6] IPMI: dropping non severe PEL event [1176269707047,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176799761967,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1176800833577,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1176801858861,3] I2C: Failed to read the MODE_REG [1176802869283,3] I2C: Failed to program the MODE_REG probe the I2C/SMBus adapters[1176922236309,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1176922246463,6] IPMI: dropping non severe PEL event [1176924230953,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1176925274161,3] MFSI 0:0: Access error on port 2, stat=000100000000 now? (YES/no[1177055275834,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1177057298031,3] I2C: Failed to read the MODE_REG [1177057346456,3] I2C: Failed to program the MODE_REG ): Sorry, no sup[1177058435933,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1177058440433,6] IPMI: dropping non severe PEL event [1177044435397,3] CHIPTOD: Chip to TB timeout [1177044436415,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a14000 [1177044437391,3] CHIPTOD: OPAL: Resync timebase failed on CPU 0x0066 [1177338016748,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1177339081524,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1177340119964,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1177459768969,3] I2C: Failed to read the MODE_REG [1177460801449,3] I2C: Failed to program the MODE_REG ported PCI bus adapters found.

N[1177461944437,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1177461948659,6] IPMI: dropping non severe PEL event [1177592897448,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1177593937377,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1177595147558,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1177596169585,3] I2C: Failed to read the MODE_REG [1177726044751,3] I2C: Failed to program the MODE_REG ext adapter: AST i2c bit bus [1177727152641,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1177727157983,6] IPMI: dropping non severe PEL event [1177859116994,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1177860164254,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1177861204046,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1177862239055,3] I2C: Failed to read the MODE_REG [1177992255142,3] I2C: Failed to program the MODE_REG (i2c-0) Do you want to scan [1177993370191,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1177993374450,6] IPMI: dropping non severe PEL event [1177999455791,3] MFSI 0:0: XSCOM error -6 writing OPB CMD it? [1178134402885,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1178137266079,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1178138356121,3] I2C: Failed to read the MODE_REG [1178138402187,3] I2C: Failed to program the MODE_REG (yes/NO/selectively): N[1178268806729,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1178268810905,6] IPMI: dropping non severe PEL event [1178270827502,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1178271856408,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1178392619743,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1178393654078,3] I2C: Failed to read the MODE_REG [1178393701950,3] I2C: Failed to program the MODE_REG ext adapter: cen_80000000_e0p[1178530000233,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1178530004495,6] IPMI: dropping non severe PEL event [1178532060660,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1178533121146,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1178663984391,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1178665041868,3] I2C: Failed to read the MODE_REG [1178665089462,3] I2C: Failed to program the MODE_REG 0 (i2c-1) Do you want to sca[1178666230063,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1178666234319,6] IPMI: dropping non severe PEL event [1178797141562,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1178798166494,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1178934330438,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1178935366180,3] I2C: Failed to read the MODE_REG [1178935412972,3] I2C: Failed to program the MODE_REG n it? (YES/no/selectively): C[1178936617024,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1178936621205,6] IPMI: dropping non severe PEL event [1179058311161,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1179059366010,3] MFSI 0:0: Access error on port 2, stat=000100000000 lient found a[1179190324276,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1179191385791,3] I2C: Failed to read the MODE_REG [1179191433263,3] I2C: Failed to program the MODE_REG t address 0x52 [1179192598959,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1179192603167,6] IPMI: dropping non severe PEL event [1179192290127,3] CHIPTOD: Chip to TB timeout [1179192290815,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a14000 [1179192287586,3] CHIPTOD: OPAL: Resync timebase failed on CPU 0x0066 [1179841293467,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1179842321743,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1179843418511,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1179844462588,3] I2C: Failed to read the MODE_REG [1179963462595,3] I2C: Failed to program the MODE_REG Handled by driver at24' (already l[1179964628676,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1179964639315,6] IPMI: dropping non severe PEL event [1179966677599,3] MFSI 0:0: XSCOM error -6 writing OPB CMD oade[1180096565519,3] MFSI 0:0: Access error on port 2, stat=000100000000 d), chip [1180098596511,3] CENTAUR 80000001: MFSI write error -6 writing CMD type24c02[1180099646541,3] I2C: Failed to read the MODE_REG ' (note[1180229717519,3] I2C: Failed to program the MODE_REG : this is probably NOT a sensor chip!)

Next adapter: c[1180230878719,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1180230892527,6] IPMI: dropping non severe PEL event [1180361893711,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1180362943720,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1180365039803,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1180501075948,3] I2C: Failed to read the MODE_REG [1180501131988,3] I2C: Failed to program the MODE_REG en_80000000_e[1180502328459,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1180502342119,6] IPMI: dropping non severe PEL event [1180504472335,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1180623938335,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1180624997260,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1180627660501,3] I2C: Failed to read the MODE_REG [1180629452511,3] I2C: Failed to program the MODE_REG 0p1 (i2c-2) Do you want to s[1180762495115,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1180762508777,6] IPMI: dropping non severe PEL event [1180764248424,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1180765296528,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1180886950408,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1180888062989,3] I2C: Failed to read the MODE_REG [1180888121599,3] I2C: Failed to program the MODE_REG can it? (YES/no/selectively):[1181018382155,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1181018395949,6] IPMI: dropping non severe PEL event [1181020448150,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1181021499863,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1181142069326,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1181143115400,3] I2C: Failed to read the MODE_REG [1181143171335,3] I2C: Failed to program the MODE_REG Client found[1181144319882,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1181144333626,6] IPMI: dropping non severe PEL event at address 0x52[1181275198202,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1181276239745,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1181407243599,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1181408297946,3] I2C: Failed to read the MODE_REG [1181408356463,3] I2C: Failed to program the MODE_REG

Handled by [1181409554351,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1181409567945,6] IPMI: dropping non severe PEL event [1181540479751,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1181541543801,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1181542614996,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1181673537871,3] I2C: Failed to read the MODE_REG [1181674563539,3] I2C: Failed to program the MODE_REG driver at24' (already loaded[1181675689687,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1181675703423,6] IPMI: dropping non severe PEL event [1181806664498,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1181807708443,3] MFSI 0:0: Access error on port 2, stat=000100000000 [1181808766735,3] CENTAUR 80000001: MFSI write error -6 writing CMD [1181809801538,3] I2C: Failed to read the MODE_REG [1181949999295,3] I2C: Failed to program the MODE_REG ), chip type24c02' (no[1181951293835,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1181951307583,6] IPMI: dropping non severe PEL event [1181953240008,3] MFSI 0:0: XSCOM error -6 writing OPB CMD te: [1182078085368,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1182080146420,3] CENTAUR 80000004: MFSI write error -6 writing CMD this[1182200843835,3] I2C: Failed to disable the sensor cache is probably NOT a sensor chip!)

Next adapter: cen_80000001_e0p0 ([1182202062546,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1182202076090,6] IPMI: dropping non severe PEL event [1182204059097,3] MFSI 0:0: XSCOM error -6 writing OPB CMD i2c-[1182334031423,3] MFSI 0:0: Access error on port 7, stat=000100000000 3) Do yo[1182336054645,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1182337105161,3] I2C: Failed to read the MODE_REG u want [1182467850909,3] I2C: Failed to program the MODE_REG to scan it? (YES/no/selectively): Client found at address[1182469088754,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1182469102511,6] IPMI: dropping non severe PEL event [1182471178361,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1182595188851,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1182596238728,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1182597271151,3] I2C: Failed to read the MODE_REG [1182598277157,3] I2C: Failed to program the MODE_REG 0x52 Handled by driver at2[1182728373517,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1182728380076,6] IPMI: dropping non severe PEL event [1182730411636,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1182865392680,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1182867450495,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1182868540231,3] I2C: Failed to read the MODE_REG [1182869539407,3] I2C: Failed to program the MODE_REG 4' (already loaded), chip typ[1182999738685,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1182999752379,6] IPMI: dropping non severe PEL event [1183001780196,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1183002915713,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1183123485217,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1183124516284,3] I2C: Failed to read the MODE_REG [1183124562480,3] I2C: Failed to program the MODE_REG e24c02' (note: this is[1183125675960,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1183125680177,6] IPMI: dropping non severe PEL event [1183256661861,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1183257678373,3] MFSI 0:0: Access error on port 7, stat=000100000000 probably NOT[1183389891607,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1183390986788,3] I2C: Failed to read the MODE_REG [1183392033223,3] I2C: Failed to program the MODE_REG [1183392126309,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1183392130505,6] IPMI: dropping non severe PEL event [1183523676575,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1183524727868,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1183525774134,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1183654954721,3] I2C: Failed to read the MODE_REG [1183655962595,3] I2C: Failed to program the MODE_REG a sensor chip!)

Next adap[1183657056163,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1183657060440,6] IPMI: dropping non severe PEL event [1183777879881,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1183778909995,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1183781011344,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1183910936101,3] I2C: Failed to read the MODE_REG [1183910983919,3] I2C: Failed to program the MODE_REG ter: cen_80000001_e0p1 (i2c-4[1183912162657,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1183912166956,6] IPMI: dropping non severe PEL event [1184044183494,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1184045270097,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1184047357731,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1184177185153,3] I2C: Failed to read the MODE_REG [1184177233225,3] I2C: Failed to program the MODE_REG ) Do you want to scan it? (Y[1184178359412,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1184178363652,6] IPMI: dropping non severe PEL event [1184180368639,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1184310376625,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1184312437526,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1184313525814,3] I2C: Failed to read the MODE_REG [1184313572895,3] I2C: Failed to program the MODE_REG ES/no/selecti[1184443590860,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1184443595017,6] IPMI: dropping non severe PEL event [1184445636278,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1184576551876,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1184577588858,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1184578620823,3] I2C: Failed to read the MODE_REG [1184579632441,3] I2C: Failed to program the MODE_REG vely): Client found at addres[1184709754308,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1184709758818,6] IPMI: dropping non severe PEL event [1184711776111,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1184712777710,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1184842821742,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1184843910303,3] I2C: Failed to read the MODE_REG [1184844921295,3] I2C: Failed to program the MODE_REG s 0x52 Handled by driver at[1184846077778,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1184846087931,6] IPMI: dropping non severe PEL event [1184981817487,3] MFSI 0:0: XSCOM error -6 writing OPB CMD 24' [1184982951487,3] MFSI 0:0: Access error on port 7, stat=000100000000 (already loaded), chip type24c02' (note: this is probably NOT a se[1185110899798,3] CENTAUR 80000004: MFSI write error -6 writing CMD nsor chip!)[1185113143397,3] I2C: Failed to read the MODE_REG

Next adapter: cen_800000[1185237739580,3] I2C: Failed to program the MODE_REG 04_e0p0 (i2c-5) [1185238870312,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1185238884160,6] IPMI: dropping non severe PEL event [1185240951743,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1185370149770,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1185371279717,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1185372331173,3] I2C: Failed to read the MODE_REG [1185373379839,3] I2C: Failed to program the MODE_REG [1185493818471,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1185493832150,6] IPMI: dropping non severe PEL event [1185495860155,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1185625233573,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1185626262106,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1185627365695,3] I2C: Failed to read the MODE_REG [1185628441980,3] I2C: Failed to program the MODE_REG [1185628558355,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1185628572020,6] IPMI: dropping non severe PEL event [1185750139070,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1185751180271,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1185752232411,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1185882159437,3] I2C: Failed to read the MODE_REG [1185883182894,3] I2C: Failed to program the MODE_REG [1185884275919,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1185884289553,6] IPMI: dropping non severe PEL event [1186015307485,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1186016344952,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1186017389401,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1186018488962,3] I2C: Failed to read the MODE_REG [1186148444035,3] I2C: Failed to program the MODE_REG [1186149584125,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1186149597744,6] IPMI: dropping non severe PEL event [1186281590958,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1186281655714,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1186283700383,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1186284742125,3] I2C: Failed to read the MODE_REG [1186284800948,3] I2C: Failed to program the MODE_REG [1186414766224,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1186414772139,6] IPMI: dropping non severe PEL event [1186416802254,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1186417850521,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1186547779828,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1186548828329,3] I2C: Failed to read the MODE_REG [1186549879845,3] I2C: Failed to program the MODE_REG [1186551251559,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1186551262543,6] IPMI: dropping non severe PEL event [1186687115387,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1186688143551,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1186819193505,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1186820205535,3] I2C: Failed to read the MODE_REG [1186821238347,3] I2C: Failed to program the MODE_REG [1186821377572,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1186821389951,6] IPMI: dropping non severe PEL event [1186942047663,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1186943091583,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1186944138110,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1187075180586,3] I2C: Failed to read the MODE_REG [1187075237455,3] I2C: Failed to program the MODE_REG [1187076301490,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1187076315203,6] IPMI: dropping non severe PEL event [1187085588642,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1187218910351,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1187220015611,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1187221060446,3] I2C: Failed to read the MODE_REG [1187222108548,3] I2C: Failed to program the MODE_REG [1187341453967,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1187341467540,6] IPMI: dropping non severe PEL event [1187343502835,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1187474466175,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1187475511970,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1187476553194,3] I2C: Failed to read the MODE_REG [1187476612044,3] I2C: Failed to program the MODE_REG [1187477715592,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1187477729272,6] IPMI: dropping non severe PEL event [1187608687039,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1187609722660,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1187610937791,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1187740802882,3] I2C: Failed to read the MODE_REG [1187742019265,3] I2C: Failed to program the MODE_REG [1187743139940,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1187743153492,6] IPMI: dropping non severe PEL event [1187873862512,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1187874908308,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1187875951631,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1188007661910,3] I2C: Failed to read the MODE_REG [1188008719875,3] I2C: Failed to program the MODE_REG [1188009807901,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1188009814522,6] IPMI: dropping non severe PEL event [1188010865480,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1188150408499,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1188151515436,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1188153603775,3] I2C: Failed to read the MODE_REG [1188153662324,3] I2C: Failed to program the MODE_REG Do you want to sc[1188263468869,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1188263478180,6] IPMI: dropping non severe PEL event an it? (YES/no/s[1188265269146,3] MFSI 0:0: XSCOM error -6 writing OPB CMD elec[1188266335263,3] MFSI 0:0: Access error on port 7, stat=000100000000 tively): Client found at [1188397111791,3] CENTAUR 80000004: MFSI write error -6 writing CMD address 0x5[1188398172650,3] I2C: Failed to read the MODE_REG 2 Handled b[1188528293749,3] I2C: Failed to program the MODE_REG y driver at24' (already [1188529450271,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1188529463759,6] IPMI: dropping non severe PEL event [1188531502881,3] MFSI 0:0: XSCOM error -6 writing OPB CMD load[1188662376495,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1188663526260,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1188664565335,3] I2C: Failed to read the MODE_REG [1188665648703,3] I2C: Failed to program the MODE_REG ed), chip type24c02' [1188795612111,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1188795625680,6] IPMI: dropping non severe PEL event [1188797683748,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1188798742818,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1188929555199,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1188930598751,3] I2C: Failed to read the MODE_REG [1188930655045,3] I2C: Failed to program the MODE_REG (note: this is probably NO[1188931815030,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1188931828477,6] IPMI: dropping non severe PEL event [1189062791081,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1189063820772,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1189196560493,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1189197604054,3] I2C: Failed to read the MODE_REG [1189197660427,3] I2C: Failed to program the MODE_REG T a sensor ch[1189198874575,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1189198888142,6] IPMI: dropping non severe PEL event [1189329058862,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1189334331351,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1189335451471,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1189456434084,3] I2C: Failed to read the MODE_REG [1189457461880,3] I2C: Failed to program the MODE_REG ip!)

Next adapter: cen_800[1189458735005,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1189458748808,6] IPMI: dropping non severe PEL event [1189579818655,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1189580862991,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1189582991973,3] CENTAUR 80000004: MFSI write error -6 writing CMD 00004_e0p1 (i2c-6) [1189713973190,3] I2C: Failed to read the MODE_REG [1189715840172,3] I2C: Failed to program the MODE_REG [1189723774651,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1189723788351,6] IPMI: dropping non severe PEL event [1189845095702,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1189846132513,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1189847180346,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1189848289423,3] I2C: Failed to read the MODE_REG [1189967961866,3] I2C: Failed to program the MODE_REG [1189969112317,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1189969124703,6] IPMI: dropping non severe PEL event [1189971271033,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1190101075526,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1190102137951,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1190103192018,3] I2C: Failed to read the MODE_REG [1190104239847,3] I2C: Failed to program the MODE_REG [1190234561781,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1190234574111,6] IPMI: dropping non severe PEL event [1190236599836,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1190366344573,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1190367411231,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1190368470124,3] I2C: Failed to read the MODE_REG [1190369617401,3] I2C: Failed to program the MODE_REG [1190369733637,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1190369747309,6] IPMI: dropping non severe PEL event [1190501610057,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1190502643871,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1190503729175,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1190633601028,3] I2C: Failed to read the MODE_REG [1190634616511,3] I2C: Failed to program the MODE_REG [1190635749261,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1190635761358,6] IPMI: dropping non severe PEL event [1190767380242,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1190768414246,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1190769463407,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1190770522805,3] I2C: Failed to read the MODE_REG [1190899828478,3] I2C: Failed to program the MODE_REG [1190900951319,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1190900964906,6] IPMI: dropping non severe PEL event [1191022623920,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1191023716303,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1191024769320,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1191024844211,3] I2C: Failed to read the MODE_REG [1191025894914,3] I2C: Failed to program the MODE_REG [1191155858214,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1191155871822,6] IPMI: dropping non severe PEL event [1191157988851,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1191159043383,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1191294097382,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1191295206270,3] I2C: Failed to read the MODE_REG [1191296317371,3] I2C: Failed to program the MODE_REG [1191297470824,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1191297484452,6] IPMI: dropping non severe PEL event [1191417969393,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1191419091724,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1191554215345,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1191555262735,3] I2C: Failed to read the MODE_REG [1191556373713,3] I2C: Failed to program the MODE_REG [1191556489763,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1191556503204,6] IPMI: dropping non severe PEL event [1191678104488,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1191679146959,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1191681217607,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1191811195340,3] I2C: Failed to read the MODE_REG [1191811252662,3] I2C: Failed to program the MODE_REG [1191812402943,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1191812415636,6] IPMI: dropping non severe PEL event [1191814504911,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1191944272290,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1191945324609,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1191946374684,3] I2C: Failed to read the MODE_REG [1191947418607,3] I2C: Failed to program the MODE_REG [1192077466536,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1192077478797,6] IPMI: dropping non severe PEL event [1192079576123,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1192210537728,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1192211596075,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1192212673276,3] I2C: Failed to read the MODE_REG [1192213688099,3] I2C: Failed to program the MODE_REG [1192213805518,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1192213819199,6] IPMI: dropping non severe PEL event [1192344767636,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1192345805813,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1192346855833,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1192476784972,3] I2C: Failed to read the MODE_REG [1192477796794,3] I2C: Failed to program the MODE_REG [1192478956163,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1192478969857,6] IPMI: dropping non severe PEL event [1192610170175,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1192611267674,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1192612323403,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1192613421151,3] I2C: Failed to read the MODE_REG [1192742994895,3] I2C: Failed to program the MODE_REG [1192744156229,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1192744169823,6] IPMI: dropping non severe PEL event [1192881216823,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1192882262132,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1192883324927,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1192892069677,3] I2C: Failed to read the MODE_REG [1192892128893,3] I2C: Failed to program the MODE_REG [1193004231228,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1193004244849,6] IPMI: dropping non severe PEL event [1193006267663,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1193007281482,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1193137279454,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1193138333055,3] I2C: Failed to read the MODE_REG [1193139362187,3] I2C: Failed to program the MODE_REG [1193140492404,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1193140505938,6] IPMI: dropping non severe PEL event [1193271506959,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1193272539134,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1193403502506,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1193404544639,3] I2C: Failed to read the MODE_REG [1193405628526,3] I2C: Failed to program the MODE_REG [1193406755116,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1193406767469,6] IPMI: dropping non severe PEL event [1193537626367,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1193538673790,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1193539726677,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1193539801535,3] I2C: Failed to read the MODE_REG [1193669747856,3] I2C: Failed to program the MODE_REG [1193670867091,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1193670879360,6] IPMI: dropping non severe PEL event [1193677645697,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1193807979668,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1193809004329,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1193810066211,3] I2C: Failed to read the MODE_REG [1193811121386,3] I2C: Failed to program the MODE_REG [1193931155063,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1193931168709,6] IPMI: dropping non severe PEL event [1193933249819,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1194063913595,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1194064978623,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1194066156879,3] I2C: Failed to read the MODE_REG [1194067234997,3] I2C: Failed to program the MODE_REG [1194067356299,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1194067369948,6] IPMI: dropping non severe PEL event [1194198188234,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1194199219014,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1194200263540,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1194345807198,3] I2C: Failed to read the MODE_REG [1194346796618,3] I2C: Failed to program the MODE_REG [1194347891221,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1194347904841,6] IPMI: dropping non severe PEL event [1194468458785,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1194469501794,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1194470624712,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1194601611663,3] I2C: Failed to read the MODE_REG [1194602678817,3] I2C: Failed to program the MODE_REG [1194603860418,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1194603874101,6] IPMI: dropping non severe PEL event [1194734652639,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1194735776266,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1194736820455,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1194737873278,3] I2C: Failed to read the MODE_REG [1194867805791,3] I2C: Failed to program the MODE_REG [1194867923908,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1194867937525,6] IPMI: dropping non severe PEL event [1194869955830,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1194870997889,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1195001722117,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1195002776808,3] I2C: Failed to read the MODE_REG [1195003797898,3] I2C: Failed to program the MODE_REG [1195134166419,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1195134173223,6] IPMI: dropping non severe PEL event [1195136247567,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1195137279887,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1195673073675,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1195674712557,3] I2C: Failed to read the MODE_REG [1195677087241,3] I2C: Failed to program the MODE_REG [1195677262708,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1195677274735,6] IPMI: dropping non severe PEL event [1195799691870,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1195800723436,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1195802828791,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1195932836648,3] I2C: Failed to read the MODE_REG [1195932903215,3] I2C: Failed to program the MODE_REG Do you want to scan it? (YES/n[1195934335871,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1195934345896,6] IPMI: dropping non severe PEL event [1195936142610,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1196065947831,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1196068000307,3] CENTAUR 80000004: MFSI write error -6 writing CMD o/select[1196199702098,3] I2C: Failed to read the MODE_REG [1196200783686,3] I2C: Failed to program the MODE_REG ively[1196200925172,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1196200934527,6] IPMI: dropping non severe PEL event [1196202944833,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1196335714917,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1196337161015,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1196338188347,3] I2C: Failed to read the MODE_REG [1196339204878,3] I2C: Failed to program the MODE_REG ): Client found at address 0x[1196460465706,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1196460475192,6] IPMI: dropping non severe PEL event [1196462533327,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1196463561674,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1196585012286,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1196586084467,3] I2C: Failed to read the MODE_REG [1196586139519,3] I2C: Failed to program the MODE_REG 52 Handled by driver at24' [1196587384717,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1196587394607,6] IPMI: dropping non severe PEL event [1196722591727,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1196723631722,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1196845156358,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1196846188500,3] I2C: Failed to read the MODE_REG [1196846255466,3] I2C: Failed to program the MODE_REG (already load[1196847381978,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1196847392013,6] IPMI: dropping non severe PEL event [1196978321732,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1196979430255,3] MFSI 0:0: Access error on port 7, stat=000100000000 [1197110416197,3] CENTAUR 80000004: MFSI write error -6 writing CMD [1197110503629,3] I2C: Failed to read the MODE_REG [1197111479854,3] I2C: Failed to program the MODE_REG ed), chip type24c02' ([1197112827234,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1197112838974,6] IPMI: dropping non severe PEL event [1197243606333,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1197244693507,3] MFSI 0:0: Access error on port 6, stat=000100000000 note: this is probably NOT a [1197376575917,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1197377674293,3] I2C: Failed to disable the sensor cache sensor chip!)

Next adapter: cen_80000005_e0p0[1197378882570,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1197378897177,6] IPMI: dropping non severe PEL event [1197509782901,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1197510820619,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1197512893716,3] CENTAUR 80000005: MFSI write error -6 writing CMD (i2c-7)[1197642890949,3] I2C: Failed to read the MODE_REG [1197643972479,3] I2C: Failed to program the MODE_REG

[1197644105891,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1197644120511,6] IPMI: dropping non severe PEL event [1197646191856,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1197776116535,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1197777138162,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1197778184155,3] I2C: Failed to read the MODE_REG [1197779199384,3] I2C: Failed to program the MODE_REG [1197909209613,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1197909224296,6] IPMI: dropping non severe PEL event [1197911254657,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1198042234543,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1198043302223,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1198044450047,3] I2C: Failed to read the MODE_REG [1198045508748,3] I2C: Failed to program the MODE_REG [1198175450760,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1198175465566,6] IPMI: dropping non severe PEL event [1198177503861,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1198177578216,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1198308449749,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1198309498678,3] I2C: Failed to read the MODE_REG [1198309564503,3] I2C: Failed to program the MODE_REG [1198310698302,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1198310713022,6] IPMI: dropping non severe PEL event [1198441635903,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1198442635274,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1198445257671,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1198574717688,3] I2C: Failed to read the MODE_REG [1198575781115,3] I2C: Failed to program the MODE_REG [1198576916591,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1198576931462,6] IPMI: dropping non severe PEL event [1198707823992,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1198708922444,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1198709984216,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1198711079161,3] I2C: Failed to read the MODE_REG [1198840944038,3] I2C: Failed to program the MODE_REG [1198841084947,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1198841099466,6] IPMI: dropping non severe PEL event [1198843120599,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1198844168847,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1198984347494,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1198986387953,3] I2C: Failed to read the MODE_REG [1198986452559,3] I2C: Failed to program the MODE_REG [1199106329971,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1199106339903,6] IPMI: dropping non severe PEL event [1199108336422,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1199109363752,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1199240294327,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1199241406100,3] I2C: Failed to read the MODE_REG [1199242449757,3] I2C: Failed to program the MODE_REG [1199243615664,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1199243625541,6] IPMI: dropping non severe PEL event [1199374505674,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1199375541523,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1199376607807,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1199506527106,3] I2C: Failed to read the MODE_REG [1199506582414,3] I2C: Failed to program the MODE_REG [1199507697773,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1199507707503,6] IPMI: dropping non severe PEL event [1199509707675,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1199639687718,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1199640744202,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1199641864209,3] I2C: Failed to read the MODE_REG [1199772889087,3] I2C: Failed to program the MODE_REG [1199774020401,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1199774030321,6] IPMI: dropping non severe PEL event [1199776176058,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1199905876432,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1199906943890,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1199907993526,3] I2C: Failed to read the MODE_REG [1199909049054,3] I2C: Failed to program the MODE_REG [1200039093750,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1200039103485,6] IPMI: dropping non severe PEL event [1200041131448,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1200042205297,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1200172144670,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1200173192057,3] I2C: Failed to read the MODE_REG [1200173245125,3] I2C: Failed to program the MODE_REG [1200174345711,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1200174364086,6] IPMI: dropping non severe PEL event [1200305370557,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1200306414889,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1200307518345,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1200438498116,3] I2C: Failed to read the MODE_REG [1200439534018,3] I2C: Failed to program the MODE_REG [1200440682539,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1200440700767,6] IPMI: dropping non severe PEL event [1200571518011,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1200572610991,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1200573671927,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1200574723317,3] I2C: Failed to read the MODE_REG [1200708061295,3] I2C: Failed to program the MODE_REG [1200710263066,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1200710281601,6] IPMI: dropping non severe PEL event [1200712277233,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1200712356253,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1200843975206,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1200845049812,3] I2C: Failed to read the MODE_REG [1200845118010,3] I2C: Failed to program the MODE_REG [1200846632830,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1200846651583,6] IPMI: dropping non severe PEL event [1200966852479,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1200967896182,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1201098955612,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1201100016389,3] I2C: Failed to read the MODE_REG [1201101141360,3] I2C: Failed to program the MODE_REG [1201102284151,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1201102302936,6] IPMI: dropping non severe PEL event [1201233062453,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1201234137150,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1201235196787,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1201375593325,3] I2C: Failed to read the MODE_REG [1201376654849,3] I2C: Failed to program the MODE_REG [1201376791793,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1201376810575,6] IPMI: dropping non severe PEL event [1201378811777,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1201508640767,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1201509713170,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1201641541877,3] I2C: Failed to read the MODE_REG [1201641606282,3] I2C: Failed to program the MODE_REG [1201642698658,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1201642717341,6] IPMI: dropping non severe PEL event [1201644814423,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1201774757627,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1201775822447,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1201776916278,3] I2C: Failed to read the MODE_REG [1201777979889,3] I2C: Failed to program the MODE_REG [1201908011571,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1201908030229,6] IPMI: dropping non severe PEL event [1201910316039,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1201910392647,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1202040934325,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1202041994468,3] I2C: Failed to read the MODE_REG [1202042060708,3] I2C: Failed to program the MODE_REG [1202043186142,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1202043204507,6] IPMI: dropping non severe PEL event [1202180253076,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1202181399021,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1202182478869,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1202302145231,3] I2C: Failed to read the MODE_REG [1202303247626,3] I2C: Failed to program the MODE_REG [1202304430867,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1202304449180,6] IPMI: dropping non severe PEL event [1202435255444,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1202436283917,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1202437347957,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1202438414318,3] I2C: Failed to read the MODE_REG [1202568334511,3] I2C: Failed to program the MODE_REG [1202569474451,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1202569492889,6] IPMI: dropping non severe PEL event [1202570559220,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1202571593620,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1202701535016,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1202703569543,3] I2C: Failed to read the MODE_REG [1202703636604,3] I2C: Failed to program the MODE_REG [1202834736463,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1202834754847,6] IPMI: dropping non severe PEL event [1202840945257,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1202842009093,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1202972820977,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1202973865479,3] I2C: Failed to read the MODE_REG [1202974942799,3] I2C: Failed to program the MODE_REG [1202976092180,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1202976110506,6] IPMI: dropping non severe PEL event [1203097463077,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1203098509521,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1203099639353,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1203224455103,3] I2C: Failed to read the MODE_REG [1203225526975,3] I2C: Failed to program the MODE_REG Do you want to scan it? (YES/no/selectively): Client found [1203227075151,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1203227093575,6] IPMI: dropping non severe PEL event [1203351736561,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1203352797951,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1203353856153,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1203484809997,3] I2C: Failed to read the MODE_REG [1203485827107,3] I2C: Failed to program the MODE_REG at address 0x52 Handled by d[1203486980719,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1203486999493,6] IPMI: dropping non severe PEL event [1203623158228,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1203624208462,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1203626311337,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1203745927465,3] I2C: Failed to read the MODE_REG [1203745994577,3] I2C: Failed to program the MODE_REG river at24' (already loaded)[1203747187032,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1203747197031,6] IPMI: dropping non severe PEL event [1203749202691,3] MFSI 0:0: XSCOM error -6 writing OPB CMD , ch[1203879071487,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1203881109152,3] CENTAUR 80000005: MFSI write error -6 writing CMD ip type24c02' [1204012148677,3] I2C: Failed to read the MODE_REG [1204013254527,3] I2C: Failed to program the MODE_REG (not[1204014316328,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1204014326105,6] IPMI: dropping non severe PEL event [1204015379187,3] MFSI 0:0: XSCOM error -6 writing OPB CMD e: t[1204146106471,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1204148168399,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1204149213855,3] I2C: Failed to read the MODE_REG [1204149266855,3] I2C: Failed to program the MODE_REG his is pr[1204278529126,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1204278539192,6] IPMI: dropping non severe PEL event [1204280585861,3] MFSI 0:0: XSCOM error -6 writing OPB CMD obab[1204281622462,3] MFSI 0:0: Access error on port 6, stat=000100000000 ly NOT a [1204402072845,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1204404095843,3] I2C: Failed to read the MODE_REG [1204404149688,3] I2C: Failed to program the MODE_REG sensor chip!) [1204405404620,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1204405414348,6] IPMI: dropping non severe PEL event [1204535741567,3] MFSI 0:0: XSCOM error -6 writing OPB CMD

Nex[1204536792094,3] MFSI 0:0: Access error on port 6, stat=000100000000 t adapter[1204659105696,3] CENTAUR 80000005: MFSI write error -6 writing CMD : cen_80000[1204660219823,3] I2C: Failed to read the MODE_REG 005_e0p1 (i2[1204661301039,3] I2C: Failed to program the MODE_REG c-8) [1204786206940,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1204786227418,6] IPMI: dropping non severe PEL event [1204788277982,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1204789716415,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1204913264742,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1204914319487,3] I2C: Failed to read the MODE_REG [1204915386746,3] I2C: Failed to program the MODE_REG [1204915543702,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1204915562404,6] IPMI: dropping non severe PEL event [1205050324703,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1205052229071,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1205054277157,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1205054357408,3] I2C: Failed to read the MODE_REG [1205180227388,3] I2C: Failed to program the MODE_REG [1205181412367,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1205181432660,6] IPMI: dropping non severe PEL event [1205312955116,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1205313991693,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1205315090463,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1205316147060,3] I2C: Failed to read the MODE_REG [1205437247982,3] I2C: Failed to program the MODE_REG [1205438702671,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1205438719985,6] IPMI: dropping non severe PEL event [1205440458546,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1205563610401,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1205564682308,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1205565743647,3] I2C: Failed to read the MODE_REG [1205566800341,3] I2C: Failed to program the MODE_REG [1205566940018,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1205566957325,6] IPMI: dropping non severe PEL event [1205697856047,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1205698912463,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1205829828488,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1205830893311,3] I2C: Failed to read the MODE_REG [1205831942271,3] I2C: Failed to program the MODE_REG [1205833079322,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1205833096324,6] IPMI: dropping non severe PEL event [1205963975097,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1205965033855,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1205966111932,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1206095996623,3] I2C: Failed to read the MODE_REG [1206097078539,3] I2C: Failed to program the MODE_REG [1206097217235,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1206097234476,6] IPMI: dropping non severe PEL event [1206099261079,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1206229182801,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1206231295295,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1206361279916,3] I2C: Failed to read the MODE_REG [1206361348674,3] I2C: Failed to program the MODE_REG [1206362500733,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1206362517970,6] IPMI: dropping non severe PEL event [1206364602319,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1206495407491,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1206496465279,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1206497491893,3] I2C: Failed to read the MODE_REG [1206498542879,3] I2C: Failed to program the MODE_REG [1206628581035,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1206628598133,6] IPMI: dropping non severe PEL event [1206630656661,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1206631704285,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1206766980367,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1206768053338,3] I2C: Failed to read the MODE_REG [1206769140425,3] I2C: Failed to program the MODE_REG [1206769283192,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1206769303449,6] IPMI: dropping non severe PEL event [1206889643718,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1206890723936,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1206891785922,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1207022776975,3] I2C: Failed to read the MODE_REG [1207023806158,3] I2C: Failed to program the MODE_REG [1207024924775,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1207024945099,6] IPMI: dropping non severe PEL event [1207155864292,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1207156916244,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1207166176287,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1207167252175,3] I2C: Failed to read the MODE_REG [1207299290821,3] I2C: Failed to program the MODE_REG [1207300431748,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1207300451896,6] IPMI: dropping non severe PEL event [1207302532949,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1207422075749,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1207423186153,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1207424253123,3] I2C: Failed to read the MODE_REG [1207425342122,3] I2C: Failed to program the MODE_REG [1207555234934,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1207555255135,6] IPMI: dropping non severe PEL event [1207556306531,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1207557342792,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1207688369307,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1207689411301,3] I2C: Failed to read the MODE_REG [1207690441570,3] I2C: Failed to program the MODE_REG [1207691535588,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1207691556254,6] IPMI: dropping non severe PEL event [1207822510464,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1207823561437,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1207824685076,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1207954580567,3] I2C: Failed to read the MODE_REG [1207955705668,3] I2C: Failed to program the MODE_REG [1207956806393,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1207956826815,6] IPMI: dropping non severe PEL event [1208087714159,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1208088784094,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1208089865937,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1208220771636,3] I2C: Failed to read the MODE_REG [1208221846765,3] I2C: Failed to program the MODE_REG [1208221995487,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1208222013995,6] IPMI: dropping non severe PEL event [1208224015983,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1208353951759,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1208355018252,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1208356073755,3] I2C: Failed to read the MODE_REG [1208357192861,3] I2C: Failed to program the MODE_REG [1208487212047,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1208487230517,6] IPMI: dropping non severe PEL event [1208489307069,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1208490391992,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1208986370743,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1208987536748,3] I2C: Failed to read the MODE_REG [1208998138456,3] I2C: Failed to program the MODE_REG [1208998282281,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1208998302336,6] IPMI: dropping non severe PEL event [1209112804235,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1209113855233,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1209114927056,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1209244811010,3] I2C: Failed to read the MODE_REG [1209245831368,3] I2C: Failed to program the MODE_REG [1209246945152,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1209246965644,6] IPMI: dropping non severe PEL event [1209377951829,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1209379061257,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1209380121175,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1209381211845,3] I2C: Failed to read the MODE_REG [1209511841894,3] I2C: Failed to program the MODE_REG [1209513025074,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1209513045595,6] IPMI: dropping non severe PEL event [1209515088996,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1209639047901,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1209640115231,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1209641175087,3] I2C: Failed to read the MODE_REG [1209772179167,3] I2C: Failed to program the MODE_REG [1209772329772,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1209772350320,6] IPMI: dropping non severe PEL event [1209778918610,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1209779970739,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1209910639409,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1209911686926,3] I2C: Failed to read the MODE_REG [1209912712495,3] I2C: Failed to program the MODE_REG [1209913819690,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1209913837839,6] IPMI: dropping non severe PEL event [1210035097455,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1210036210779,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1210037277110,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1210161365119,3] I2C: Failed to read the MODE_REG [1210162423600,3] I2C: Failed to program the MODE_REG [1210163592521,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1210163612705,6] IPMI: dropping non severe PEL event [1210294394855,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1210294467100,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1210296614538,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1210427525634,3] I2C: Failed to read the MODE_REG [1210427586952,3] I2C: Failed to program the MODE_REG [1210428787959,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1210428808076,6] IPMI: dropping non severe PEL event [1210430754950,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1210560725290,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1210561827590,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1210563008439,3] I2C: Failed to read the MODE_REG [1210564096104,3] I2C: Failed to program the MODE_REG [1210693933320,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1210693954015,6] IPMI: dropping non severe PEL event [1210695970246,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1210697020306,3] MFSI 0:0: Access error on port 6, stat=000100000000 [ 2284.9[1210826927519,3] CENTAUR 80000005: MFSI write error -6 writing CMD 92194] I[1210827995487,3] I2C: Failed to read the MODE_REG NFO: rcu_sched [1210829066863,3] I2C: Failed to program the MODE_REG detected stalls on CPUs/tasks: { 62} (det[1210960542719,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1210960563103,6] IPMI: dropping non severe PEL event [1210962169489,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1210963213097,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1211094150642,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1211095203473,3] I2C: Failed to read the MODE_REG [1211095264710,3] I2C: Failed to program the MODE_REG ected by 30, [1211096404955,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1211096425301,6] IPMI: dropping non severe PEL event [1211227518616,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1211228613423,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1211229665747,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1211364598753,3] I2C: Failed to read the MODE_REG [1211365627243,3] I2C: Failed to program the MODE_REG t=6052 jiffies, g=6274, c=627[1211366782125,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1211366802477,6] IPMI: dropping non severe PEL event [1211497749698,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1211498795871,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1211630713983,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1211631840979,3] I2C: Failed to read the MODE_REG [1211631902042,3] I2C: Failed to program the MODE_REG 3, q=0) [ 2285.475161] Task [1211633058495,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1211633076928,6] IPMI: dropping non severe PEL event [1211763902543,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1211764979416,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1211767014937,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1211896967789,3] I2C: Failed to read the MODE_REG [1211897030192,3] I2C: Failed to program the MODE_REG dump for CPU [1211898187407,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7 [1211898197107,6] IPMI: dropping non severe PEL event [1211905266655,3] MFSI 0:0: XSCOM error -6 writing OPB CMD [1212035261473,3] MFSI 0:0: Access error on port 6, stat=000100000000 [1212036354173,3] CENTAUR 80000005: MFSI write error -6 writing CMD [1212037392013,3] I2C: Failed to read the MODE_REG [1212158106506,3] I2C: Failed to program the MODE_REG 62: [ 2285.475182] swapper/62 R running task 0 0 1 0x00000800 [ 2285.475221] Call Trace: [ 2285.475250] [c000003c5cb23b80] [000001128d5664f7] 0x1128d5664f7 (unreliable) [ 2285.475297] [c000003c5cb23d50] [c0000000000164f8] __switch_to+0x268/0x450 [ 2285.475336] [c000003c5cb23d70] [c0000000001234f4] finish_task_switch+0x74/0x210 [ 2285.475382] [c000003c5cb23db0] [c0000000009425c8] __schedule+0x338/0xa40 [ 2285.475421] [c000003c5cb23e80] [c0000000009442c4] schedule_preempt_disabled+0x34/0xb0 [ 2285.475466] [c000003c5cb23ea0] [c00000000015d560] cpu_startup_entry+0x180/0x300 [ 2285.475512] [c000003c5cb23f20] [c00000000004be00] start_secondary+0x310/0x340 Do you want to s[ 2285.475551] [c000003c5cb23f90] [c000000000009a6c] start_seconcdary_prolog+0x10/0x14an it? (YES/no/s electively): Client found at address 0x52 Handled by driver at24' (already loaded), chip type24c02' (note: this is probably NOT a sensor chip!)

Next adapter: p8_00000000_e0p0 (i2c-9) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Handled by driver at24' (already loaded), chip type24c128' (note: this is probably NOT a sensor chip!) Client found at address 0x51 Handled by driver at24' (already loaded), chip type24c128' (note: this is probably NOT a sensor chip!)

Next adapter: p8_00000000_e0p1 (i2c-10) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Handled by driver at24' (already loaded), chip type24c128' (note: this is probably NOT a sensor chip!) Client found at address 0x51 Handled by driver at24' (already loaded), chip type24c128' (note: this is probably NOT a sensor chip!)

Next adapter: p8_00000000_e1p2 (i2c-11) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Handled by driver at24' (already loaded), chip type24c128' (note: this is probably NOT a sensor chip!)

Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `to-be-written':

ISA bus, address 0xca0 Chip `IPMI BMC KCS' (confidence: 4)
ISA bus, address 0xca8 Chip `IPMI BMC SMIC' (confidence: 4)

Note: there is no driver for IPMI BMC KCS yet. Check http://www.lm-sensors.org/wiki/Devices for updates.

No modules to load, skipping modules configuration.

[SOL Session operational. Use ~? for help]

[ 2465.052182] INFO: rcu_sched detected stalls on CPUs/tasks: { 62} (detected by 28, t=24010 jiffies, g=6274, c=6273, q=0) [ 2465.052380] Task dump for CPU 62: [ 2465.052495] swapper/62 R running task 0 0 1 0x00000800 [ 2465.052534] Call Trace: [ 2465.052550] [c000003c5cb23b80] [000001128d5664f7] 0x1128d5664f7 (unreliable) [ 2465.052596] [c000003c5cb23d50] [c0000000000164f8] __switch_to+0x268/0x450 [ 2465.052634] [c000003c5cb23d70] [c0000000001234f4] finish_task_switch+0x74/0x210 [ 2465.052679] [c000003c5cb23db0] [c0000000009425c8] __schedule+0x338/0xa40 [ 2465.052718] [c000003c5cb23e80] [c0000000009442c4] schedule_preempt_disabled+0x34/0xb0 [ 2465.052762] [c000003c5cb23ea0] [c00000000015d560] cpu_startup_entry+0x180/0x300 [ 2465.052807] [c000003c5cb23f20] [c00000000004be00] start_secondary+0x310/0x340 [ 2465.052846] [c000003c5cb23f90] [c000000000009a6c] start_secondary_prolog+0x10/0x14

[ 2645.102172] INFO: rcu_sched detected stalls on CPUs/tasks: { 62} (detected by 24, t=42015 jiffies, g=6274, c=6273, q=0) [ 2645.102522] Task dump for CPU 62: [ 2645.102574] swapper/62 R running task 0 0 1 0x00000800 [ 2645.102633] Call Trace: [ 2645.102657] [c000003c5cb23b80] [000001128d5664f7] 0x1128d5664f7 (unreliable) [ 2645.102727] [c000003c5cb23d50] [c0000000000164f8] __switch_to+0x268/0x450 [ 2645.102787] [c000003c5cb23d70] [c0000000001234f4] finish_task_switch+0x74/0x210 [ 2645.102858] [c000003c5cb23db0] [c0000000009425c8] __schedule+0x338/0xa40 [ 2645.102918] [c000003c5cb23e80] [c0000000009442c4] schedule_preempt_disabled+0x34/0xb0 [ 2645.102989] [c000003c5cb23ea0] [c00000000015d560] cpu_startup_entry+0x180/0x300 [ 2645.103058] [c000003c5cb23f20] [c00000000004be00] start_secondary+0x310/0x340 [ 2645.103119] [c000003c5cb23f90] [c000000000009a6c] start_secondary_prolog+0x10/0x14


Not sure , this issue persists with OP810.30 GA'ed FW, will try on it

Reproduced with OP810.30 as well. Below are my findings.

ipmitool fru print 43
 Product Name          : OpenPOWER Firmware
 Product Version       : IBM-habanero-ibm-OP8_v1.7_1.62
 Product Extra         :    hostboot-bc98d0b-1a29dff
 Product Extra         :    occ-0362706-16fdfa7
 Product Extra         :    skiboot-5.1.13
 Product Extra         :    hostboot-binaries-43d5a59
 Product Extra         :    habanero-xml-a71550e-cdd3b31
 Product Extra         :    capp-ucode-105cb8f
cd skiboot/external/xscom-utils/
 ./getscom -l
Chip ID  | Rev   | Chip type
---------|-------|--------
80000005 | DD2.0 | Centaur memory buffer
80000004 | DD2.0 | Centaur memory buffer
80000001 | DD2.0 | Centaur memory buffer
80000000 | DD2.0 | Centaur memory buffer
00000000 | DD2.0 | P8 (Venice) processor
sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.

# modprobe ibmpowernv

# sensors

ibmpowernv-isa-0000
Adapter: ISA adapter
Core 0-7:     +53.0°C  
Core 8-15:    +53.0°C  
Core 16-23:   +53.0°C  
Core 24-31:   +53.0°C  
Core 32-39:   +56.0°C  
Core 40-47:   +57.0°C  
Core 48-55:   +56.0°C  
Core 56-63:   +59.0°C  
Core 64-71:   +57.0°C  
Core 72-79:   +56.0°C  
Centaur 0:    +41.0°C  
Centaur 1:    +45.0°C  
Centaur 4:    +39.0°C  
Centaur 5:    +41.0°C  

 ipmitool mc reset cold
Sent cold reset command to MC

# [  277.749623] usb 1-1.1: USB disconnect, device number 3

[  278.773611] usb 1-1.2: USB disconnect, device number 4
[  279.799243] usb 1-1.3: USB disconnect, device number 5
[  280.769250] usb 1-1.4: USB disconnect, device number 6
Error: No response to keepalive - Terminating session
Error: No response de-activating SOL payload
[SOL Session operational.  Use ~? for help]

# sensors

ibmpowernv-isa-0000
Adapter: ISA adapter
Core 0-7:     +48.0°C  
Core 8-15:    +48.0°C  
Core 16-23:   +47.0°[236280079001,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[236280082957,6] IPMI: dropping non severe PEL event
C [236281611180,3] MFSI 0:0: XSCOM error -6 writing OPB CMD

Co[236282608104,3] MFSI 0:0: Access error on port 3, stat=000100000000
re 24-31: [236283679855,3] CENTAUR 80000000: MFSI write error -6 writing CMD
  +48.0°C  
Core 32-39:   +50.0°C  
Core 40-47:   +51.0�[236285804646,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[236285807880,6] IPMI: dropping non severe PEL event
�C[236287731791,3] MFSI 0:0: XSCOM error -6 writing OPB CMD

C[236288765173,3] MFSI 0:0: Access error on port 2, stat=000100000000
ore 48-55:[236291766340,3] CENTAUR 80000001: MFSI write error -6 writing CMD
   +52.0°C  
Core 56-63:   +53.0°C  
Cor[236292926143,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[236292929289,6] IPMI: dropping non severe PEL event
e [236295708940,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
64-71[236296813403,3] MFSI 0:0: Access error on port 7, stat=000100000000
:   +52.0�[236297845268,3] CENTAUR 80000004: MFSI write error -6 writing CMD
�C  
Core 72-79:   +51.0°C  
ERROR: Can't get value of su[236300159807,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[236300162981,6] IPMI: dropping non severe PEL event
bf[236302131151,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
eatur[236303155125,3] MFSI 0:0: Access error on port 6, stat=000100000000
e temp11_i[236305977587,3] CENTAUR 80000005: MFSI write error -6 writing CMD
nput: I/O error
Centaur 0:        N/A  
ERROR: Can't get value of subfeature temp12_input: I/O error
Centaur 1:        N/A  
ERROR: Can't get value of subfeature temp13_input: I/O error
Centaur 4:        N/A  
ERROR: Can't get value of subfeature temp14_input: I/O error
Centaur 5:        N/A  

# echo YES | sensors-detect

# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)

# DMI data unavailable, please consider installing dmidecode 2.7

# or later for better results.

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): modprobe: FATAL: Module cpuid not found.
Failed to load module cpuid.
Silicon Integrated Systems SIS5595...                    [247468910929,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247468914724,6] IPMI: dropping non severe PEL event
  [247470471080,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
 No
[247471841007,3] MFSI 0:0: Access error on port 3, stat=000100000000
VIA VT82C6[247472863889,3] CENTAUR 80000000: MFSI write error -6 writing CMD
86 Integrate[247475009085,3] I2C: Failed to disable the sensor cache
d Sensors...                          No
VIA VT8231 I[247477077387,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247477080889,6] IPMI: dropping non severe PEL event
[247479700527,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247481049295,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247482749210,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247484104010,3] I2C: Failed to read the MODE_REG
[247485782633,3] I2C: Failed to program the MODE_REG
[247487995311,3] SLW: Stuck with odd generation !
[247489291690,3] SLW: Register state:
[247489319503,3] SLW:  e0000 = 0201000800000ad8
[247491110994,3] SLW:  e0001 = 8000ffffffffffff
[247493008029,3] SLW:  e0002 = 0000000000000000
[247493043418,3] SLW:  e0003 = 00bff00000000000
[247494603808,3] SLW:  e0004 = 0000000000000000
[247496171706,3] SLW:  e0005 = 0000000000000000
[247497801576,3] SLW:  e0006 = 0000000004ba052d
[247497839375,3] SLW:  e0007 = 000000000000000a
[247499434264,3] SLW:  e0008 = 0000000800000000
[247501013270,3] SLW:  e0009 = 0000000000000000
[247503302152,3] SLW:  e000a = 0000000000000000
[247505239148,3] SLW:  e000b = 0000000000000000
[247505277903,3] SLW:  e000c = 0000000000000000
[247507379670,3] SLW:  e000d = 0000000000000000
[247509002063,3] SLW:  e000e = 0000000000000000
[247509038986,3] SLW:  e000f = 0005003a70000000
[247510920402,3] SLW:  e0010 = 000800000ad40001
[247512505434,3] SLW:  e0011 = 0000000000000000
[247514138121,3] SLW:  e0012 = 0000000000000000
[247514175542,3] SLW:  e0013 = 0000000000000000
[247515764639,3] SLW:  e0014 = 0000000070000904
[247517629718,3] SLW:  e0015 = 0000000300000000
[247517665654,3] SLW:  e0016 = 0000000280002000
[247519409774,3] SLW:  e0017 = c200510500000000
[247521159828,3] SLW:  e0018 = b400000300000000
[247523148624,3] SLW:  e0019 = 0000000000000000
[247523215637,3] XSCOM: read error gcid=0x0 pcb_addr=0x5001c stat=0x7
[247523218568,6] IPMI: dropping non severe PEL event
[247526822570,3] SLW: XSCOM error -6 reading reg 0x5001c
ntegrated[247529079564,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247529082692,6] IPMI: dropping non severe PEL event
[247532796842,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247533805039,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247534832913,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247535844320,3] I2C: Failed to read the MODE_REG
[247536850494,3] I2C: Failed to program the MODE_REG
 Sensors...                         [247538503628,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247538506742,6] IPMI: dropping non severe PEL event
  [247541852790,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247543459540,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247545031343,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247546535983,3] I2C: Failed to read the MODE_REG
[247548430921,3] I2C: Failed to program the MODE_REG
 No
AMD K8 thermal sensors...    [247550069206,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247550072319,6] IPMI: dropping non severe PEL event
[247553987548,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247555548655,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247557303864,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247559121808,3] I2C: Failed to read the MODE_REG
[247560860653,3] I2C: Failed to program the MODE_REG
                               No
A[247562488414,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247562491554,6] IPMI: dropping non severe PEL event
[247566724483,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247572588837,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247573693477,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247574788763,3] I2C: Failed to read the MODE_REG
[247575779406,3] I2C: Failed to program the MODE_REG
MD Family 10h thermal sensors...    [247576939453,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247576942582,6] IPMI: dropping non severe PEL event
[247579012675,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247580006813,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247581039599,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247582057143,3] I2C: Failed to read the MODE_REG
[247583051856,3] I2C: Failed to program the MODE_REG
                       No
AMD Famil[247584488425,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247584491523,6] IPMI: dropping non severe PEL event
[247587589999,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247588584611,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247590612047,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247591644517,3] I2C: Failed to read the MODE_REG
[247592716202,3] I2C: Failed to program the MODE_REG
y 11h thermal sensors...            [247594003884,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247594006990,6] IPMI: dropping non severe PEL event
[247596078489,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247597108723,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247598112463,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247599228727,3] I2C: Failed to read the MODE_REG
[247600225011,3] I2C: Failed to program the MODE_REG
               No
AMD Family 12h an[247601339318,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247601342401,6] IPMI: dropping non severe PEL event
[247603375571,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247604715631,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247605723967,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247606734442,3] I2C: Failed to read the MODE_REG
[247607723715,3] I2C: Failed to program the MODE_REG
d 14h thermal sensors...            [247608875488,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247608878591,6] IPMI: dropping non severe PEL event
[247610967519,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247612005855,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247613072255,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247615145445,3] I2C: Failed to read the MODE_REG
[247615185647,3] I2C: Failed to program the MODE_REG
       No
AMD Family 15h thermal se[247616295537,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247616298655,6] IPMI: dropping non severe PEL event
[247618291559,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247619312931,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247620628339,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247621654890,3] I2C: Failed to read the MODE_REG
[247622711281,3] I2C: Failed to program the MODE_REG
nsors...                           N[247623825992,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247623829103,6] IPMI: dropping non severe PEL event
[247626019433,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247627063138,3] MFSI 0:0: Access error on port 3, stat=000100000000
o[247628073244,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247629106955,3] I2C: Failed to read the MODE_REG
[247630192209,3] I2C: Failed to program the MODE_REG

AMD Family 15h power sensors...  [247631319044,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247631322143,6] IPMI: dropping non severe PEL event
[247633330522,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247634342558,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247635663231,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247636688040,3] I2C: Failed to read the MODE_REG
[247637679679,3] I2C: Failed to program the MODE_REG
                           No
AMD F[247638866637,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247638869743,6] IPMI: dropping non severe PEL event
[247644480898,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247645657693,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247646689467,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247647748652,3] I2C: Failed to read the MODE_REG
[247648696730,3] I2C: Failed to program the MODE_REG
amily 16h power sensors...          [247649796770,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247649799885,6] IPMI: dropping non severe PEL event
[247652392746,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247653436963,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247654462904,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247656285743,3] I2C: Failed to read the MODE_REG
[247657245965,3] I2C: Failed to program the MODE_REG
                   No
Intel digital[247658352783,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247658355875,6] IPMI: dropping non severe PEL event
[247660611349,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247661622625,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247662643717,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247663659533,3] I2C: Failed to read the MODE_REG
[247664655983,3] I2C: Failed to program the MODE_REG
 thermal sensor...                  [247666036879,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247666039992,6] IPMI: dropping non severe PEL event
[247668118513,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
       [247669323460,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247671477528,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247671530227,3] I2C: Failed to read the MODE_REG
[247672523400,3] I2C: Failed to program the MODE_REG
    No
Intel AMB FB-DIMM the[247673703466,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247673706597,6] IPMI: dropping non severe PEL event
[247675885467,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247676893547,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247677969272,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247678989743,3] I2C: Failed to read the MODE_REG
[247680002052,3] I2C: Failed to program the MODE_REG
rmal sensor...                      [247687890543,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247687893680,6] IPMI: dropping non severe PEL event
  [247692786185,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247693828850,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247694834731,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247695849855,3] I2C: Failed to read the MODE_REG
[247706854297,3] I2C: Failed to program the MODE_REG
 No
VIA C7 thermal sensor...     [247707923211,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247707926360,6] IPMI: dropping non severe PEL event
  [247709922883,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247711007549,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247713353753,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247713404783,3] I2C: Failed to read the MODE_REG
[247714397181,3] I2C: Failed to program the MODE_REG
                             No
V[247715506156,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247715509250,6] IPMI: dropping non severe PEL event
[247723448684,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247724495412,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247725485501,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247726502989,3] I2C: Failed to read the MODE_REG
[247732680318,3] I2C: Failed to program the MODE_REG
IA Nano thermal sensor...           [247733735958,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247733739090,6] IPMI: dropping non severe PEL event
[247735742292,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247736803253,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247738448158,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247740475100,3] I2C: Failed to read the MODE_REG
[247740513913,3] I2C: Failed to program the MODE_REG
                       No

Some Su[247745274628,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247745277752,6] IPMI: dropping non severe PEL event
[247747560295,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247748577584,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247749624330,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247750615668,3] I2C: Failed to read the MODE_REG
[247751613896,3] I2C: Failed to program the MODE_REG
per I/O chips contain embedded senso[247752814166,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247752817278,6] IPMI: dropping non severe PEL event
[247754805161,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247755815657,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247756838905,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247759189477,3] I2C: Failed to read the MODE_REG
[247759227137,3] I2C: Failed to program the MODE_REG
rs. We have to write to
standard I/[247760304201,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247760307291,6] IPMI: dropping non severe PEL event
[247762337511,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247763406303,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247764426495,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247766403819,3] I2C: Failed to read the MODE_REG
[247766444085,3] I2C: Failed to program the MODE_REG
O ports to probe the[247767679149,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247767682351,6] IPMI: dropping non severe PEL event
[247769612907,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247770662707,3] MFSI 0:0: Access error on port 3, stat=000100000000
m[247771684880,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247772708684,3] I2C: Failed to read the MODE_REG
[247774028473,3] I2C: Failed to program the MODE_REG
. This is usually safe.
Do you wan[247775212644,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247775215774,6] IPMI: dropping non severe PEL event
[247777273945,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247778341300,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247779379680,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247780388843,3] I2C: Failed to read the MODE_REG
[247781470660,3] I2C: Failed to program the MODE_REG
t to scan for Super I/O sensors? (YE[247782592333,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247782595428,6] IPMI: dropping non severe PEL event
[247785078227,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247786090479,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247787104655,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247788125564,3] I2C: Failed to read the MODE_REG
[247789507950,3] I2C: Failed to program the MODE_REG
S/no): Probing for Super-I/O at 0x2e[247790628478,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247790631199,3] ELOG: Error getting buffer to log error
/0x2f
Trying [247792692349,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247793750331,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247795745680,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247796764143,3] I2C: Failed to read the MODE_REG
[247796801804,3] I2C: Failed to program the MODE_REG
[247797848193,3] ELOG: Error getting buffer to log error
family `National Semiconductor/ITE'...  [247798962454,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247798965166,3] ELOG: Error getting buffer to log error
[247801917133,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247801959010,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247802985074,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247804240872,3] I2C: Failed to read the MODE_REG
[247805307762,3] I2C: Failed to program the MODE_REG
[247806313784,3] ELOG: Error getting buffer to log error
             No
Trying family`SMSC'.[247807513679,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247807516426,3] ELOG: Error getting buffer to log error
[247810652647,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247810696178,3] MFSI 0:0: Access error on port 3, stat=000100000000
..           [247815671862,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247817729423,3] I2C: Failed to read the MODE_REG
[247817768323,3] I2C: Failed to program the MODE_REG
[247818960446,3] ELOG: Error getting buffer to log error
                         [247820332415,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247820335146,3] ELOG: Error getting buffer to log error
[247823470831,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247823515246,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247824681090,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247825701823,3] I2C: Failed to read the MODE_REG
[247826752302,3] I2C: Failed to program the MODE_REG
[247827734381,3] ELOG: Error getting buffer to log error
 No
Trying family `VIA/Winbond/Nuvoto[247828869567,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247828872276,3] ELOG: Error getting buffer to log error
[247830965054,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247831971619,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247832989347,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247834007736,3] I2C: Failed to read the MODE_REG
[247835309589,3] I2C: Failed to program the MODE_REG
[247836443934,3] ELOG: Error getting buffer to log error
n/Fintek'...               No
Trying family`ITE'... [247837545059,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247837547778,3] ELOG: Error getting buffer to log error
[247840655957,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247840698718,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247842731767,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247843749437,3] I2C: Failed to read the MODE_REG
[247843786111,3] I2C: Failed to program the MODE_REG
[247844900291,3] ELOG: Error getting buffer to log error
                                     N[247845968866,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247845971575,3] ELOG: Error getting buffer to log error
[247849001860,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247849043746,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247851568195,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247851618102,3] I2C: Failed to read the MODE_REG
[247853631359,3] I2C: Failed to program the MODE_REG
[247854670850,3] ELOG: Error getting buffer to log error
o
[247856577236,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247856579949,3] ELOG: Error getting buffer to log error
[247859637179,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247859679455,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247861825545,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247861876986,3] I2C: Failed to read the MODE_REG
[247862899821,3] I2C: Failed to program the MODE_REG
[247863939176,3] ELOG: Error getting buffer to log error

Trying family `National Semiconductor[247865032343,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247865035067,3] ELOG: Error getting buffer to log error
[247868289766,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247868331677,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247870364473,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247870417336,3] I2C: Failed to read the MODE_REG
[247871417660,3] I2C: Failed to program the MODE_REG
[247872451959,3] ELOG: Error getting buffer to log error
/ITE'...               No
Trying fami[247873529541,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247873532255,3] ELOG: Error getting buffer to log error
[247876713492,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247876755908,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247877770773,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247878790065,3] I2C: Failed to read the MODE_REG
[247879786935,3] I2C: Failed to program the MODE_REG
[247881139657,3] ELOG: Error getting buffer to log error
ly`SMSC'...                          [247882263448,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247882266154,3] ELOG: Error getting buffer to log error
[247888235259,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247889312209,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247890337749,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247891483951,3] I2C: Failed to read the MODE_REG
[247892484284,3] I2C: Failed to program the MODE_REG
[247893524427,3] ELOG: Error getting buffer to log error
           No
Trying family `VIA/Winb[247894599460,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247894602175,3] ELOG: Error getting buffer to log error
[247896979546,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247897987700,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247899001321,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247900016171,3] I2C: Failed to read the MODE_REG
[247901040617,3] I2C: Failed to program the MODE_REG
[247902055407,3] ELOG: Error getting buffer to log error
ond/Nuvoton/Fintek'...               N[247903144466,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247903147166,3] ELOG: Error getting buffer to log error
[247905183657,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247906289128,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247907358511,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247908378299,3] I2C: Failed to read the MODE_REG
[247912657855,3] I2C: Failed to program the MODE_REG
[247913714882,3] ELOG: Error getting buffer to log error
o
Trying family`ITE'...                             [247914818487,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247914821185,3] ELOG: Error getting buffer to log error
[247918356359,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247918400095,3] MFSI 0:0: Access error on port 3, stat=000100000000
         No
[247920415882,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247921450729,3] I2C: Failed to read the MODE_REG
[247922548491,3] I2C: Failed to program the MODE_REG
[247922589807,3] ELOG: Error getting buffer to log error

Some systems (mainly se[247923732803,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247923735503,3] ELOG: Error getting buffer to log error
[247927091887,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247927136481,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247929175482,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247929230142,3] I2C: Failed to read the MODE_REG
[247930198413,3] I2C: Failed to program the MODE_REG
[247931242404,3] ELOG: Error getting buffer to log error
rvers) implement IPMI, a set of common[247932359201,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247932361906,3] ELOG: Error getting buffer to log error
[247935307311,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247935352503,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247936382702,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247937496815,3] I2C: Failed to read the MODE_REG
[247938472644,3] I2C: Failed to program the MODE_REG
[247939549376,3] ELOG: Error getting buffer to log error
 interfaces
through which system heal[247940632300,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247940635007,3] ELOG: Error getting buffer to log error
[247943995930,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247944037166,3] MFSI 0:0: Access error on port 3, stat=000100000000
th data may b[247946044608,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247947096591,3] I2C: Failed to read the MODE_REG
[247947134780,3] I2C: Failed to program the MODE_REG
[247948169238,3] ELOG: Error getting buffer to log error
e retrieved, amongst othe[247949233299,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247949236020,3] ELOG: Error getting buffer to log error
[247952293485,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247952336864,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247953344561,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247954370605,3] I2C: Failed to read the MODE_REG
[247955405493,3] I2C: Failed to program the MODE_REG
[247956427135,3] ELOG: Error getting buffer to log error
r things.
We first try to get the inf[247958271525,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247958274243,3] ELOG: Error getting buffer to log error
[247960308776,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247961329505,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247962352174,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247963423919,3] I2C: Failed to read the MODE_REG
[247964373887,3] I2C: Failed to program the MODE_REG
[247965384639,3] ELOG: Error getting buffer to log error
ormation from SMBIOS. If we don't find[247966471055,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247966473774,3] ELOG: Error getting buffer to log error
[247968529596,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247969549167,3] MFSI 0:0: Access error on port 3, stat=000100000000
 it
there, w[247970646188,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247972998511,3] I2C: Failed to read the MODE_REG
[247973038295,3] I2C: Failed to program the MODE_REG
[247974061301,3] ELOG: Error getting buffer to log error
e have to read from arbit[247975321695,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247975325222,3] ELOG: Error getting buffer to log error
[247977394367,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247978435318,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247979453167,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247980469951,3] I2C: Failed to read the MODE_REG
[247981434856,3] I2C: Failed to program the MODE_REG
[247982453595,3] ELOG: Error getting buffer to log error
rary I/O ports to probe for such
inte[247984054303,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247984057035,3] ELOG: Error getting buffer to log error
[247987118737,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247989198475,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247990204026,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[247991271079,3] I2C: Failed to read the MODE_REG
[247992269974,3] I2C: Failed to program the MODE_REG
[247993371560,3] ELOG: Error getting buffer to log error
rfaces. This is normally safe. Do you [247994479432,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[247994482158,3] ELOG: Error getting buffer to log error
want to scan for IPMI
interfaces? (YES/no): P[247997455438,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[247998561417,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247999581638,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248000605102,3] I2C: Failed to read the MODE_REG
[248001638607,3] I2C: Failed to program the MODE_REG
[248002697186,3] ELOG: Error getting buffer to log error
robing for `IPMI BMC KCS' at 0xca0...                   [248004121970,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248004124681,3] ELOG: Error getting buffer to log error
[248006201507,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248007224994,3] MFSI 0:0: Access error on port 3, stat=000100000000
[247484182412,3] CHIPTOD: Chip to TB timeout
[247484179516,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a04000
[247484180750,3] OPAL: Resync timebase failed on CPU 0x0050
[248099418546,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248101011034,3] I2C: Failed to read the MODE_REG
[248102584552,3] I2C: Failed to program the MODE_REG
[248104176537,3] ELOG: Error getting buffer to log error
   Success!
[248105887979,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248105890687,3] ELOG: Error getting buffer to log error
[248108957274,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248111434861,3] MFSI 0:0: Access error on port 3, stat=000100000000
[248113046084,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248114651951,3] I2C: Failed to read the MODE_REG
[248116729530,3] I2C: Failed to program the MODE_REG
[248119554039,3] ELOG: Error getting buffer to log error

Probing for `IPMI BMC SMIC' at 0xca8.[248122189687,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248122193199,3] ELOG: Error getting buffer to log error
[248130322942,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248132106319,3] MFSI 0:0: Access error on port 3, stat=000100000000
[248133677265,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248135234049,3] I2C: Failed to read the MODE_REG
[248136888579,3] I2C: Failed to program the MODE_REG
[248138430159,3] ELOG: Error getting buffer to log error
..                     Success!
    ([248140090237,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248140093004,3] ELOG: Error getting buffer to log error
confidence 4, [248145435796,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248145494753,3] MFSI 0:0: Access error on port 3, stat=000100000000
[248148900918,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248150469383,3] I2C: Failed to read the MODE_REG
[248150509197,3] I2C: Failed to program the MODE_REG
[248152183316,3] ELOG: Error getting buffer to log error
[248153271122,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248153273854,3] ELOG: Error getting buffer to log error
[248155270914,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248156292232,3] MFSI 0:0: Access error on port 3, stat=000100000000
[248157634043,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248159404843,3] I2C: Failed to read the MODE_REG
[248160911636,3] I2C: Failed to program the MODE_REG
[248162828937,3] ELOG: Error getting buffer to log error

Some hardware monitoring chips are accessible throu[248164150431,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248164153199,3] ELOG: Error getting buffer to log error
gh the ISA I/O[248167002362,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248169392323,3] MFSI 0:0: Access error on port 3, stat=000100000000
[248170977998,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248172792013,3] I2C: Failed to read the MODE_REG
[248172831293,3] I2C: Failed to program the MODE_REG
[248174448815,3] ELOG: Error getting buffer to log error
 ports.
We have to writ[248176780526,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248176783262,3] ELOG: Error getting buffer to log error
[248180097179,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248180141685,3] MFSI 0:0: Access error on port 3, stat=000100000000
[248181166795,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248182245118,3] I2C: Failed to read the MODE_REG
[248183585522,3] I2C: Failed to program the MODE_REG
[248184637805,3] ELOG: Error getting buffer to log error
e to arbitrary I/O ports to probe them[248185706246,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248185708957,3] ELOG: Error getting buffer to log error
[248188866895,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248188911855,3] MFSI 0:0: Access error on port 3, stat=000100000000
[248189926014,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248190942999,3] I2C: Failed to read the MODE_REG
[248191946879,3] I2C: Failed to program the MODE_REG
[248193251452,3] ELOG: Error getting buffer to log error
. This is usually
safe though. Yes, y[248194319373,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248194322083,3] ELOG: Error getting buffer to log error
ou do have ISA[248196419119,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248197438104,3] MFSI 0:0: Access error on port 3, stat=000100000000
[248204995719,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248209617471,3] I2C: Failed to read the MODE_REG
[248209656093,3] I2C: Failed to program the MODE_REG
[248210725692,3] ELOG: Error getting buffer to log error
 I/O ports even if you d[248211787341,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248211790059,3] ELOG: Error getting buffer to log error
[248214991435,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248216867507,3] MFSI 0:0: Access error on port 3, stat=000100000000
[248224009039,3] CENTAUR 80000000: MFSI write error -6 writing CMD
[248225034845,3] I2C: Failed to read the MODE_REG
[248226035007,3] I2C: Failed to program the MODE_REG
[248227047312,3] ELOG: Error getting buffer to log error
o not have any
ISA slots! Do you want[248232462901,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248232465689,3] ELOG: Error getting buffer to log error
[248244832071,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248246004923,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248247036197,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248248072559,3] I2C: Failed to disable the sensor cache
[248249076548,3] ELOG: Error getting buffer to log error
 to scan the ISA I/O ports? (YES/no):[248250576879,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248250579604,3] ELOG: Error getting buffer to log error
[248257588273,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248257632297,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248259751401,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248259802118,3] I2C: Failed to read the MODE_REG
[248260806149,3] I2C: Failed to program the MODE_REG
[248261867405,3] ELOG: Error getting buffer to log error
 Probing for `National Semiconductor L[248262926939,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248262929678,3] ELOG: Error getting buffer to log error
[248266415156,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248266458589,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248268458342,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248269473020,3] I2C: Failed to read the MODE_REG
[248269512809,3] I2C: Failed to program the MODE_REG
[248270836600,3] ELOG: Error getting buffer to log error
M78' at 0x290...       No
Probing for[248271900563,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248271903286,3] ELOG: Error getting buffer to log error
[248274964171,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248275007603,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248277071023,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248277122409,3] I2C: Failed to read the MODE_REG
[248278164980,3] I2C: Failed to program the MODE_REG
[248279246786,3] ELOG: Error getting buffer to log error
`National Semiconductor LM79' at 0x29[248280413442,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248280416155,3] ELOG: Error getting buffer to log error
[248283378092,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248283423600,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248285730692,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248285781773,3] I2C: Failed to read the MODE_REG
[248286777602,3] I2C: Failed to program the MODE_REG
[248287794805,3] ELOG: Error getting buffer to log error
0...       No
Probing for `Winbond W8[248288846666,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248288849392,3] ELOG: Error getting buffer to log error
[248292025935,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248292070952,3] MFSI 0:0: Access error on port 2, stat=000100000000
3781D' at 0x2[248294119103,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248295146948,3] I2C: Failed to read the MODE_REG
[248295204140,3] I2C: Failed to program the MODE_REG
[248296254645,3] ELOG: Error getting buffer to log error
90...                   N[248297426538,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248297429270,3] ELOG: Error getting buffer to log error
[248300766810,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248300811087,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248302812853,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248302865208,3] I2C: Failed to read the MODE_REG
[248303860491,3] I2C: Failed to program the MODE_REG
[248304872798,3] ELOG: Error getting buffer to log error
o
Probing for`Winbond W83782D' at 0x[248306106360,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248306109067,3] ELOG: Error getting buffer to log error
[248309157287,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248309200672,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248311324003,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248311374443,3] I2C: Failed to read the MODE_REG
[248316439561,3] I2C: Failed to program the MODE_REG
[248317453445,3] ELOG: Error getting buffer to log error
290...                   No

Lastly,[248318531621,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248318534337,3] ELOG: Error getting buffer to log error
[248320790351,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248321946997,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248322941757,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248323972563,3] I2C: Failed to read the MODE_REG
[248324973215,3] I2C: Failed to program the MODE_REG
[248326138990,3] ELOG: Error getting buffer to log error
 we can probe the I2C/SMBus adapters f[248327224990,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248327227724,3] ELOG: Error getting buffer to log error
[248330286317,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248330328287,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248331598536,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248332638376,3] I2C: Failed to read the MODE_REG
[248333707503,3] I2C: Failed to program the MODE_REG
[248334724970,3] ELOG: Error getting buffer to log error
or connected hardware
monitoring devi[248335810927,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248335813639,3] ELOG: Error getting buffer to log error
[248338866828,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248338911011,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248340572145,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248341601064,3] I2C: Failed to read the MODE_REG
[248342666546,3] I2C: Failed to program the MODE_REG
[248343677342,3] ELOG: Error getting buffer to log error
ces. This is the most risky part, and [248344822303,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248344825007,3] ELOG: Error getting buffer to log error
[248347166636,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248348156850,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248349172528,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248350197939,3] I2C: Failed to read the MODE_REG
[248351198878,3] I2C: Failed to program the MODE_REG
[248352325952,3] ELOG: Error getting buffer to log error
while it works
reasonably well on mos[248353422744,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248353425452,3] ELOG: Error getting buffer to log error
t systems, it [248355458636,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248356531278,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248358651097,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248359669191,3] I2C: Failed to read the MODE_REG
[248359708911,3] I2C: Failed to program the MODE_REG
[248360793932,3] ELOG: Error getting buffer to log error
has been reported to cause trouble
on s[248362171139,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248362173855,3] ELOG: Error getting buffer to log error
[248365220829,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248365265313,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248367396554,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248368415849,3] I2C: Failed to read the MODE_REG
[248368453681,3] I2C: Failed to program the MODE_REG
[248369533886,3] ELOG: Error getting buffer to log error
ome systems.
Do you want to probe the[248370605979,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248370608687,3] ELOG: Error getting buffer to log error
[248373699406,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248373744543,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248375793007,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248376841381,3] I2C: Failed to read the MODE_REG
[248376880069,3] I2C: Failed to program the MODE_REG
[248378202295,3] ELOG: Error getting buffer to log error
 I2C/SMBus adapters now? (YES/no): Sor[248379298127,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248379300842,3] ELOG: Error getting buffer to log error
[248382568748,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248382611034,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248389488381,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248389541204,3] I2C: Failed to read the MODE_REG
[248390516441,3] I2C: Failed to program the MODE_REG
[248391526879,3] ELOG: Error getting buffer to log error
ry, no supported PCI bus adapters foun[248393628768,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248393631494,3] ELOG: Error getting buffer to log error
[248396626401,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248396670640,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248397809343,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248398967733,3] I2C: Failed to read the MODE_REG
[248399959729,3] I2C: Failed to program the MODE_REG
[248401031728,3] ELOG: Error getting buffer to log error
d.

Next adapter: AST i2c bit bus (i[248402120810,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248402123535,3] ELOG: Error getting buffer to log error
[248404192925,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248405200255,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248406214837,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248407237739,3] I2C: Failed to read the MODE_REG
[248408506305,3] I2C: Failed to program the MODE_REG
[248409530183,3] ELOG: Error getting buffer to log error
2c-0)
Do you want to scan it? (yes/NO[248410619077,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248410621786,3] ELOG: Error getting buffer to log error
[248412689004,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248413817018,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248414886979,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248415899804,3] I2C: Failed to read the MODE_REG
[248416890308,3] I2C: Failed to program the MODE_REG
[248417944416,3] ELOG: Error getting buffer to log error
/selectively): 
Next adapter: cen_80000000_e0p0 (i2c-[248419113205,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248419115903,3] ELOG: Error getting buffer to log error
1)
Do you wan[248422075310,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248423113983,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248424507618,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248425515631,3] I2C: Failed to read the MODE_REG
[248425554615,3] I2C: Failed to program the MODE_REG
[248426674517,3] ELOG: Error getting buffer to log error
t to scan it? (YES/no/se[248427746034,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248427748748,3] ELOG: Error getting buffer to log error
[248430928303,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248430973344,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248432964865,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248433014507,3] I2C: Failed to read the MODE_REG
[248434954957,3] I2C: Failed to program the MODE_REG
[248436051944,3] ELOG: Error getting buffer to log error
lectively): Client found at address 0x[248437139449,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248437142159,3] ELOG: Error getting buffer to log error
[248440425994,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248440469471,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248441572895,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248442570600,3] I2C: Failed to read the MODE_REG
[248443621699,3] I2C: Failed to program the MODE_REG
[248444714495,3] ELOG: Error getting buffer to log error
52
Handled by driver `at24' (already [248445832121,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248445834860,3] ELOG: Error getting buffer to log error
[248449117485,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248449160800,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248451204351,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248451253162,3] I2C: Failed to read the MODE_REG
[248452244608,3] I2C: Failed to program the MODE_REG
[248453252102,3] ELOG: Error getting buffer to log error
loaded), chip type`24c02'
    (note:[248454679951,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248454682687,3] ELOG: Error getting buffer to log error
[248461823907,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248461866787,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248462897920,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248463901992,3] I2C: Failed to read the MODE_REG
[248464955394,3] I2C: Failed to program the MODE_REG
[248466049289,3] ELOG: Error getting buffer to log error
[248467124558,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248467127263,3] ELOG: Error getting buffer to log error
[248470517741,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248470562097,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248471591731,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248472620972,3] I2C: Failed to read the MODE_REG
[248473622281,3] I2C: Failed to program the MODE_REG
[248474728898,3] ELOG: Error getting buffer to log error

Next adapter: cen_80000000_e0p1 (i2[248475795596,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248475798297,3] ELOG: Error getting buffer to log error
[248478754355,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248478797920,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248479906437,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248480920956,3] I2C: Failed to read the MODE_REG
[248481981105,3] I2C: Failed to program the MODE_REG
[248482998451,3] ELOG: Error getting buffer to log error
c-2)
Do you want to scan it? (YES/no/[248484260064,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248484262847,3] ELOG: Error getting buffer to log error
[248486414552,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248487522931,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248488556791,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248489648757,3] I2C: Failed to read the MODE_REG
[248490734772,3] I2C: Failed to program the MODE_REG
[248491775687,3] ELOG: Error getting buffer to log error
selectively): Client found at address [248492879806,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248492882552,3] ELOG: Error getting buffer to log error
[248494882722,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248496151782,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248497181635,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248498243062,3] I2C: Failed to read the MODE_REG
[248499240849,3] I2C: Failed to program the MODE_REG
[248958740835,3] ELOG: Error getting buffer to log error
0x52
Handled by driver `at24' (alread[248968112839,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248968115577,3] ELOG: Error getting buffer to log error
[248971473110,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[248972522281,3] MFSI 0:0: Access error on port 2, stat=000100000000
[248973545349,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[248974561717,3] I2C: Failed to read the MODE_REG
[248975628184,3] I2C: Failed to program the MODE_REG
[248977087711,3] ELOG: Error getting buffer to log error
y loaded), chip type`24c02'
    (not[248978823478,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[248978827010,3] ELOG: Error getting buffer to log error
[249008129031,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[249009690163,3] MFSI 0:0: Access error on port 2, stat=000100000000
[249011526127,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[249024353294,3] I2C: Failed to read the MODE_REG
[249025902351,3] I2C: Failed to program the MODE_REG
[249034749718,3] ELOG: Error getting buffer to log error
e: this is probably NOT a sensor chip!)

Next adapte[249036632567,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[249036635310,3] ELOG: Error getting buffer to log error
[249041915191,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[249041967919,3] MFSI 0:0: Access error on port 2, stat=000100000000
[249046127567,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[249047168042,3] I2C: Failed to read the MODE_REG
[249047213679,3] I2C: Failed to program the MODE_REG
[249048350003,3] ELOG: Error getting buffer to log error
r: cen_80000001_e0p0 (i2c-3)
Do you w[249054152632,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[249054155391,3] ELOG: Error getting buffer to log error
[249057093476,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[249057145368,3] MFSI 0:0: Access error on port 2, stat=000100000000
[249059200387,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[249069510680,3] I2C: Failed to read the MODE_REG
[249069561583,3] I2C: Failed to program the MODE_REG
[249070636287,3] ELOG: Error getting buffer to log error
ant to scan it? (YES/no/selectively): [249071736766,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[249071739501,3] ELOG: Error getting buffer to log error
[249083045071,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[249083098383,3] MFSI 0:0: Access error on port 2, stat=000100000000
[249086483788,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[249087522751,3] I2C: Failed to read the MODE_REG
[249087569311,3] I2C: Failed to program the MODE_REG
[249088625531,3] ELOG: Error getting buffer to log error
Client found at address 0x52
Handled [249089785962,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[249089788677,3] ELOG: Error getting buffer to log error
[249092821003,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[249092876740,3] MFSI 0:0: Access error on port 2, stat=000100000000
[249095011489,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[249096046142,3] I2C: Failed to read the MODE_REG
[249096095673,3] I2C: Failed to program the MODE_REG
[249097193868,3] ELOG: Error getting buffer to log error
by driver `at24' (already loaded), chi[249098304926,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[249098307627,3] ELOG: Error getting buffer to log error
p type`24c02'[248779525287,3] CHIPTOD: Chip to TB timeout
[248779522313,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a04000
[248779523298,3] OPAL: Resync timebase failed on CPU 0x004e

[249729908667,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[249730914921,3] MFSI 0:0: Access error on port 2, stat=000100000000
[249732918747,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[249732972528,3] I2C: Failed to read the MODE_REG
    (not[249863237231,3] I2C: Failed to program the MODE_REG
[249864263576,3] ELOG: Error getting buffer to log error
e: this is probably NOT a sensor[249865440918,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[249865443672,3] ELOG: Error getting buffer to log error
[250007351160,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[250007397455,3] MFSI 0:0: Access error on port 2, stat=000100000000
[250149617423,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[250149672239,3] I2C: Failed to read the MODE_REG
[250150681608,3] I2C: Failed to program the MODE_REG
[250151700045,3] ELOG: Error getting buffer to log error
 chip!)

Next adapter: cen_80000001_[250152825953,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[250152828979,3] ELOG: Error getting buffer to log error
[250284777503,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
e0p[250284824995,3] MFSI 0:0: Access error on port 2, stat=000100000000
[250415929420,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[250417027770,3] I2C: Failed to read the MODE_REG

[250417069095,3] I2C: Failed to program the MODE_REG
[250418173920,3] ELOG: Error getting buffer to log error
[250419222623,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[250419225375,3] ELOG: Error getting buffer to log error
[250550145402,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[250551193364,3] MFSI 0:0: Access error on port 2, stat=000100000000
[250681213398,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[250682260882,3] I2C: Failed to read the MODE_REG
[250683283157,3] I2C: Failed to program the MODE_REG
[250684338660,3] ELOG: Error getting buffer to log error
[250815354559,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[250815357305,3] ELOG: Error getting buffer to log error
[250817364887,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[250817408625,3] MFSI 0:0: Access error on port 2, stat=000100000000
[250822788791,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[250943308090,3] I2C: Failed to read the MODE_REG
[250944310525,3] I2C: Failed to program the MODE_REG
[250945362619,3] ELOG: Error getting buffer to log error
[250946411847,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[250946414575,3] ELOG: Error getting buffer to log error
[250540794959,3] CHIPTOD: Chip to TB timeout
[250540795768,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a04000
[250540796673,3] OPAL: Resync timebase failed on CPU 0x0057
[251219814783,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[251220832133,3] MFSI 0:0: Access error on port 2, stat=000100000000
[251221890511,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[251352847988,3] I2C: Failed to read the MODE_REG
[251352886317,3] I2C: Failed to program the MODE_REG
[251353977444,3] ELOG: Error getting buffer to log error
[251355044890,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[251355047655,3] ELOG: Error getting buffer to log error
[251485983892,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[251487013409,3] MFSI 0:0: Access error on port 2, stat=000100000000
[251488013807,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[251489039919,3] I2C: Failed to read the MODE_REG
[251619125758,3] I2C: Failed to program the MODE_REG
[251619167500,3] ELOG: Error getting buffer to log error
[251620295112,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[251620297849,3] ELOG: Error getting buffer to log error
[251752265426,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[251753265775,3] MFSI 0:0: Access error on port 2, stat=000100000000
[251754309900,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[251755332802,3] I2C: Failed to read the MODE_REG
[251885378674,3] I2C: Failed to program the MODE_REG
[251886419181,3] ELOG: Error getting buffer to log error
[251887486737,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[251887489487,3] ELOG: Error getting buffer to log error
[252018452223,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[252019477023,3] MFSI 0:0: Access error on port 2, stat=000100000000
[252020588579,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[252021690671,3] I2C: Failed to read the MODE_REG
[252021728370,3] I2C: Failed to program the MODE_REG
[252146529074,3] ELOG: Error getting buffer to log error
[252147634271,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[252147636991,3] ELOG: Error getting buffer to log error
[252289832204,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[252290837089,3] MFSI 0:0: Access error on port 2, stat=000100000000
[252291862015,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[252292876927,3] I2C: Failed to read the MODE_REG
[252422950546,3] I2C: Failed to program the MODE_REG
[252423995551,3] ELOG: Error getting buffer to log error
[252424091849,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[252424094591,3] ELOG: Error getting buffer to log error
[252426078591,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[252556118950,3] MFSI 0:0: Access error on port 2, stat=000100000000
[252557139679,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[252559238344,3] I2C: Failed to read the MODE_REG
[252559276375,3] I2C: Failed to program the MODE_REG
[252689252129,3] ELOG: Error getting buffer to log error
[252690354488,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[252690357221,3] ELOG: Error getting buffer to log error
[252822349750,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[252823363988,3] MFSI 0:0: Access error on port 2, stat=000100000000
[252824392175,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[252825411633,3] I2C: Failed to read the MODE_REG
[252825448885,3] I2C: Failed to program the MODE_REG
[252955461523,3] ELOG: Error getting buffer to log error
[252956510631,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[252956513374,3] ELOG: Error getting buffer to log error
[252958522331,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[252747842255,3] CHIPTOD: Chip to TB timeout
[252747842938,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a04000
[252747843773,3] OPAL: Resync timebase failed on CPU 0x0057
[253216341999,3] MFSI 0:0: Access error on port 2, stat=000100000000
[253217404511,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[253218431732,3] I2C: Failed to read the MODE_REG
[253219482533,3] I2C: Failed to program the MODE_REG
[253219523160,3] ELOG: Error getting buffer to log error
[253349706808,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[253349709555,3] ELOG: Error getting buffer to log error
[253351788671,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[253352792518,3] MFSI 0:0: Access error on port 2, stat=000100000000
[253493008214,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[253494009192,3] I2C: Failed to read the MODE_REG
[253495038981,3] I2C: Failed to program the MODE_REG
[253496081239,3] ELOG: Error getting buffer to log error
[253632461538,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[253632464287,3] ELOG: Error getting buffer to log error
[253634479170,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[253634522750,3] MFSI 0:0: Access error on port 2, stat=000100000000
[253765416473,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[253766418883,3] I2C: Failed to read the MODE_REG
[253766459022,3] I2C: Failed to program the MODE_REG
[253767510957,3] ELOG: Error getting buffer to log error
[253907800585,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[253907803331,3] ELOG: Error getting buffer to log error
[253909801225,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[253910811753,3] MFSI 0:0: Access error on port 2, stat=000100000000
[254040859520,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[254041881969,3] I2C: Failed to read the MODE_REG
[254042988183,3] I2C: Failed to program the MODE_REG
[254044032082,3] ELOG: Error getting buffer to log error
[254044113977,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[254044116768,3] ELOG: Error getting buffer to log error
[254175085399,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[254176119358,3] MFSI 0:0: Access error on port 2, stat=000100000000
[254307214684,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[254308243797,3] I2C: Failed to read the MODE_REG
[254309241183,3] I2C: Failed to program the MODE_REG
[254310263054,3] ELOG: Error getting buffer to log error
[254440260505,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[254440263234,3] ELOG: Error getting buffer to log error
[254442226632,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[254443227252,3] MFSI 0:0: Access error on port 2, stat=000100000000
[254573331711,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[254574354111,3] I2C: Failed to read the MODE_REG
[254575457437,3] I2C: Failed to program the MODE_REG
[254575500797,3] ELOG: Error getting buffer to log error
[254576555250,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[254576558740,3] ELOG: Error getting buffer to log error
[254707590485,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[254708725129,3] MFSI 0:0: Access error on port 2, stat=000100000000
[254839587744,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[254840619484,3] I2C: Failed to read the MODE_REG
[254841616776,3] I2C: Failed to program the MODE_REG
[254842667015,3] ELOG: Error getting buffer to log error
[254972755552,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[254972758279,3] ELOG: Error getting buffer to log error
[254974745819,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[254975765940,3] MFSI 0:0: Access error on port 2, stat=000100000000
[254636819647,3] CHIPTOD: Chip to TB timeout
[254636820408,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a04000
[254636821274,3] OPAL: Resync timebase failed on CPU 0x0057
[255108077199,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[255109103908,3] I2C: Failed to read the MODE_REG
[255238997338,3] I2C: Failed to program the MODE_REG
[255240039970,3] ELOG: Error getting buffer to log error
[255244870063,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[255244873556,3] ELOG: Error getting buffer to log error
[255367954597,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[255368971721,3] MFSI 0:0: Access error on port 2, stat=000100000000
[255369984452,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[255510298217,3] I2C: Failed to read the MODE_REG
[255511445016,3] I2C: Failed to program the MODE_REG
[255511488684,3] ELOG: Error getting buffer to log error
[255512559814,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[255512562633,3] ELOG: Error getting buffer to log error
[255643419518,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[255644501275,3] MFSI 0:0: Access error on port 2, stat=000100000000
[255645512474,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[255646575983,3] I2C: Failed to read the MODE_REG
[255776579786,3] I2C: Failed to program the MODE_REG
[255777665745,3] ELOG: Error getting buffer to log error
[255778713295,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[255778716038,3] ELOG: Error getting buffer to log error
[255909656717,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[255909700447,3] MFSI 0:0: Access error on port 2, stat=000100000000
[255911683084,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[256043252845,3] I2C: Failed to read the MODE_REG
[256043291631,3] I2C: Failed to program the MODE_REG
[256044328335,3] ELOG: Error getting buffer to log error
Do you want to scan it[256045538783,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[256045541558,3] ELOG: Error getting buffer to log error
? (YES/no/sele[256175935551,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[256177026564,3] MFSI 0:0: Access error on port 2, stat=000100000000
ctively): Clien[256179069807,3] CENTAUR 80000001: MFSI write error -6 writing CMD
t found at address 0x52
Han[256309010581,3] I2C: Failed to read the MODE_REG
dled by drive[256310109390,3] I2C: Failed to program the MODE_REG
r `at24' ([256311135846,3] ELOG: Error getting buffer to log error
already loaded), chip type`24c02'
  [256312242934,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[256312245726,3] ELOG: Error getting buffer to log error
[256444200846,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
  ([256444247024,3] MFSI 0:0: Access error on port 2, stat=000100000000
[256576381510,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[256576435260,3] I2C: Failed to read the MODE_REG
[256577436701,3] I2C: Failed to program the MODE_REG
[256578485907,3] ELOG: Error getting buffer to log error
note: this is probably NOT a sensor[256708463326,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[256708466087,3] ELOG: Error getting buffer to log error
[256711492655,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[256711533149,3] MFSI 0:0: Access error on port 2, stat=000100000000
[256838425156,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[256838477689,3] I2C: Failed to read the MODE_REG
[256839464612,3] I2C: Failed to program the MODE_REG
[256973714134,3] ELOG: Error getting buffer to log error
 chip!)
[256974781292,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[256974784812,3] ELOG: Error getting buffer to log error
[256976770547,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[257107753941,3] MFSI 0:0: Access error on port 2, stat=000100000000
[257108787841,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[257109803201,3] I2C: Failed to read the MODE_REG
[257110818433,3] I2C: Failed to program the MODE_REG
[257240887881,3] ELOG: Error getting buffer to log error
[257240972817,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[257240975549,3] ELOG: Error getting buffer to log error
[257243137746,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[257244196895,3] MFSI 0:0: Access error on port 2, stat=000100000000
[257374065422,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[257375171575,3] I2C: Failed to read the MODE_REG
[257376179839,3] I2C: Failed to program the MODE_REG
[257506213870,3] ELOG: Error getting buffer to log error

Next adapter: cen_80000004_e0p0 (i2c-5)[257511001058,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[257511003806,3] ELOG: Error getting buffer to log error

[257636060143,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[257636104079,3] MFSI 0:0: Access error on port 7, stat=000100000000
[257637116495,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[257638144099,3] I2C: Failed to disable the sensor cache
[257639143374,3] ELOG: Error getting buffer to log error
[257773741325,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[257773744843,3] ELOG: Error getting buffer to log error
[257775733104,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[257776717032,3] MFSI 0:0: Access error on port 7, stat=000100000000
[257906607238,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[257907620820,3] I2C: Failed to read the MODE_REG
[257908654591,3] I2C: Failed to program the MODE_REG
[258039653210,3] ELOG: Error getting buffer to log error
[258040718102,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[258040720847,3] ELOG: Error getting buffer to log error
[258041709540,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[258042724333,3] MFSI 0:0: Access error on port 7, stat=000100000000
[258005797948,3] CHIPTOD: Chip to TB timeout
[258005798662,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a04000
[258005795431,3] OPAL: Resync timebase failed on CPU 0x0037
[258175762946,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[258300765271,3] I2C: Failed to read the MODE_REG
[258301771066,3] I2C: Failed to program the MODE_REG
[258302808223,3] ELOG: Error getting buffer to log error
[258302893554,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[258302896264,3] ELOG: Error getting buffer to log error
[258445148453,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[258445194904,3] MFSI 0:0: Access error on port 7, stat=000100000000
[258577172447,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[258578227720,3] I2C: Failed to read the MODE_REG
[258578267548,3] I2C: Failed to program the MODE_REG
[258579279938,3] ELOG: Error getting buffer to log error
[258580350557,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[258580353551,3] ELOG: Error getting buffer to log error
[258711343103,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[258712341261,3] MFSI 0:0: Access error on port 7, stat=000100000000
[258713365680,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[258843416453,3] I2C: Failed to read the MODE_REG
[258844462927,3] I2C: Failed to program the MODE_REG
[258844505167,3] ELOG: Error getting buffer to log error
[258845560335,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[258845563856,3] ELOG: Error getting buffer to log error
[258976665363,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[258977682868,3] MFSI 0:0: Access error on port 7, stat=000100000000
[258978748462,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[259109683041,3] I2C: Failed to read the MODE_REG
[259110711521,3] I2C: Failed to program the MODE_REG
[259111756159,3] ELOG: Error getting buffer to log error
[259112822457,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[259112825199,3] ELOG: Error getting buffer to log error
[258727685960,3] CHIPTOD: Chip to TB timeout
[258727682543,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a04000
[258727683402,3] OPAL: Resync timebase failed on CPU 0x0037
[259245909772,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[259375950204,3] MFSI 0:0: Access error on port 7, stat=000100000000
[259376974895,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[259378946284,3] I2C: Failed to read the MODE_REG
[259378984911,3] I2C: Failed to program the MODE_REG
[259509160207,3] ELOG: Error getting buffer to log error
[259510219830,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[259510222561,3] ELOG: Error getting buffer to log error
[259642143716,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[259643190479,3] MFSI 0:0: Access error on port 7, stat=000100000000
[259644212015,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[259649101889,3] I2C: Failed to read the MODE_REG
[259770851007,3] I2C: Failed to program the MODE_REG
[259771939919,3] ELOG: Error getting buffer to log error
[259772025845,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[259772028575,3] ELOG: Error getting buffer to log error
[259774103858,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[259908678299,3] MFSI 0:0: Access error on port 7, stat=000100000000
[259909699108,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[259910695347,3] I2C: Failed to read the MODE_REG
[259911683194,3] I2C: Failed to program the MODE_REG
[260041941345,3] ELOG: Error getting buffer to log error
[260043014490,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[260043017226,3] ELOG: Error getting buffer to log error
[260045016023,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[260174612090,3] MFSI 0:0: Access error on port 7, stat=000100000000
[260175635398,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[260180240497,3] I2C: Failed to read the MODE_REG
[260302617863,3] I2C: Failed to program the MODE_REG
[260302661567,3] ELOG: Error getting buffer to log error
[260303789487,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[260303792294,3] ELOG: Error getting buffer to log error
[260305817857,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[260446033507,3] MFSI 0:0: Access error on port 7, stat=000100000000
[260447069460,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[260448050027,3] I2C: Failed to read the MODE_REG
[260449073071,3] I2C: Failed to program the MODE_REG
[260579161594,3] ELOG: Error getting buffer to log error
[260580220399,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[260580223151,3] ELOG: Error getting buffer to log error
[260582308843,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[260712221931,3] MFSI 0:0: Access error on port 7, stat=000100000000
[260712278222,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[260714258934,3] I2C: Failed to read the MODE_REG
[260714299712,3] I2C: Failed to program the MODE_REG
[260845402206,3] ELOG: Error getting buffer to log error
[260846528383,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[260846531113,3] ELOG: Error getting buffer to log error
[260848543786,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[260978890653,3] MFSI 0:0: Access error on port 7, stat=000100000000
[260979923911,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[260980937210,3] I2C: Failed to read the MODE_REG
[260981962815,3] I2C: Failed to program the MODE_REG
[261111630411,3] ELOG: Error getting buffer to log error
[261112686979,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[261112689702,3] ELOG: Error getting buffer to log error
[261114677839,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[261114730067,3] MFSI 0:0: Access error on port 7, stat=000100000000
[260780794863,3] CHIPTOD: Chip to TB timeout
[260780795518,3] CHIPTOD: Resync failed ! TFMR=0x3612200760a04000
[260780796383,3] OPAL: Resync timebase failed on CPU 0x004f
[261372737492,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[261373824522,3] I2C: Failed to read the MODE_REG
[261374833791,3] I2C: Failed to program the MODE_REG
[261375916725,3] ELOG: Error getting buffer to log error
[261516123895,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[261516126638,3] ELOG: Error getting buffer to log error
[261517157995,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[261518174659,3] MFSI 0:0: Access error on port 7, stat=000100000000
[261519187337,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[261649249492,3] I2C: Failed to read the MODE_REG
[261650252111,3] I2C: Failed to program the MODE_REG
[261651246087,3] ELOG: Error getting buffer to log error
[261652375263,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[261652378014,3] ELOG: Error getting buffer to log error
[261783393343,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[261784549846,3] MFSI 0:0: Access error on port 7, stat=000100000000
[261915410809,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[261919908175,3] I2C: Failed to read the MODE_REG
[261920995609,3] I2C: Failed to program the MODE_REG
[261922011129,3] ELOG: Error getting buffer to log error
[261922095500,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[261922098255,3] ELOG: Error getting buffer to log error
[262044500488,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[262045512495,3] MFSI 0:0: Access error on port 7, stat=000100000000
[262046517744,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[262186917649,3] I2C: Failed to read the MODE_REG
[262187898287,3] I2C: Failed to program the MODE_REG
[262188889333,3] ELOG: Error getting buffer to log error
[262189944735,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[262189947467,3] ELOG: Error getting buffer to log error
[262320973103,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[262321997891,3] MFSI 0:0: Access error on port 7, stat=000100000000
[262893458847,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[262894487442,3] I2C: Failed to read the MODE_REG
[262895572995,3] I2C: Failed to program the MODE_REG
[262895618462,3] ELOG: Error getting buffer to log error
[262896651481,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[262896654228,3] ELOG: Error getting buffer to log error
[263022422249,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[263023434895,3] MFSI 0:0: Access error on port 7, stat=000100000000
[263024430607,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[263164746787,3] I2C: Failed to read the MODE_REG
[263165775805,3] I2C: Failed to program the MODE_REG
[263166833879,3] ELOG: Error getting buffer to log error
[263167890646,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[263167894207,3] ELOG: Error getting buffer to log error
[263298915444,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[263298963174,3] MFSI 0:0: Access error on port 7, stat=000100000000
[263299976634,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[263432018054,3] I2C: Failed to read the MODE_REG
[263432058737,3] I2C: Failed to program the MODE_REG
[263433139694,3] ELOG: Error getting buffer to log error
[263434170217,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[263434172954,3] ELOG: Error getting buffer to log error
[263565171977,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[263566178331,3] MFSI 0:0: Access error on port 7, stat=000100000000
[263567202959,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[263697224831,3] I2C: Failed to read the MODE_REG
[263698237887,3] I2C: Failed to program the MODE_REG
[263699246820,3] ELOG: Error getting buffer to log error
[263699331853,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[263699334575,3] ELOG: Error getting buffer to log error
[263830418431,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[263831513662,3] MFSI 0:0: Access error on port 7, stat=000100000000
[263832522556,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[263963550040,3] I2C: Failed to read the MODE_REG
[263964544237,3] I2C: Failed to program the MODE_REG
[263965583056,3] ELOG: Error getting buffer to log error
[263966651828,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[263966654561,3] ELOG: Error getting buffer to log error
[264097645827,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[264098669145,3] MFSI 0:0: Access error on port 7, stat=000100000000
[264099654229,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[264229722709,3] I2C: Failed to read the MODE_REG
[264230759283,3] I2C: Failed to program the MODE_REG
[264230802543,3] ELOG: Error getting buffer to log error
[264231853506,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[264231856233,3] ELOG: Error getting buffer to log error
[264362841512,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[264363881317,3] MFSI 0:0: Access error on port 7, stat=000100000000
[264364886087,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[264495972783,3] I2C: Failed to read the MODE_REG
[264496995957,3] I2C: Failed to program the MODE_REG
[264498065665,3] ELOG: Error getting buffer to log error
[264502875341,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[264502878077,3] ELOG: Error getting buffer to log error
[264626000975,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[264626047889,3] MFSI 0:0: Access error on port 7, stat=000100000000
[264627054911,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[264762440968,3] I2C: Failed to read the MODE_REG
[264762482674,3] I2C: Failed to program the MODE_REG
[264763562930,3] ELOG: Error getting buffer to log error
[264764624287,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[264764627804,3] ELOG: Error getting buffer to log error
[264895313256,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[264896340488,3] MFSI 0:0: Access error on port 7, stat=000100000000
[264897415006,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[265028500045,3] I2C: Failed to read the MODE_REG
[265029506056,3] I2C: Failed to program the MODE_REG
[265030552623,3] ELOG: Error getting buffer to log error
Do you want to scan it? (YES/no/selectively): Client found at a[265031852822,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[265031855606,3] ELOG: Error getting buffer to log error
ddress 0x52
H[265163650424,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
andled by driver `at2[265164736352,3] MFSI 0:0: Access error on port 7, stat=000100000000
4' (alread[265294718359,3] CENTAUR 80000004: MFSI write error -6 writing CMD
y loaded), c[265295769101,3] I2C: Failed to read the MODE_REG
hip type`24c[265296815835,3] I2C: Failed to program the MODE_REG
02'
    (note: this is pr[265297875114,3] ELOG: Error getting buffer to log error
obably[265427874849,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[265427877612,3] ELOG: Error getting buffer to log error
[265560910469,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[265560954755,3] MFSI 0:0: Access error on port 7, stat=000100000000
[265561978810,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[265563006434,3] I2C: Failed to read the MODE_REG
[265564070047,3] I2C: Failed to program the MODE_REG
[265694030423,3] ELOG: Error getting buffer to log error
 NOT a sensor chip!)
[265695142263,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[265695145023,3] ELOG: Error getting buffer to log error
[265697170703,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[265827176435,3] MFSI 0:0: Access error on port 7, stat=000100000000
[265828198669,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[265829218228,3] I2C: Failed to read the MODE_REG
[265830245081,3] I2C: Failed to program the MODE_REG
[265960358740,3] ELOG: Error getting buffer to log error
[265961423240,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[265961425972,3] ELOG: Error getting buffer to log error
[266093397071,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[266093443883,3] MFSI 0:0: Access error on port 7, stat=000100000000
[266094461954,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[266096490543,3] I2C: Failed to read the MODE_REG
[266096529783,3] I2C: Failed to program the MODE_REG
[266231792947,3] ELOG: Error getting buffer to log error
[266232824848,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[266232827589,3] ELOG: Error getting buffer to log error
[266234839262,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[266374991733,3] MFSI 0:0: Access error on port 7, stat=000100000000
[266376004159,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[266377023864,3] I2C: Failed to read the MODE_REG
[266378025407,3] I2C: Failed to program the MODE_REG
[266509079807,3] ELOG: Error getting buffer to log error

[266509262686,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[266509265453,3] ELOG: Error getting buffer to log error
[266651478959,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[266651524998,3] MFSI 0:0: Access error on port 7, stat=000100000000
[266652534126,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[266653618246,3] I2C: Failed to read the MODE_REG
[266654610927,3] I2C: Failed to program the MODE_REG
[266784659630,3] ELOG: Error getting buffer to log error
Next adapter: cen_80000004_e0p1 (i2c-6[266789679116,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[266789682636,3] ELOG: Error getting buffer to log error
[266913576421,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[266913620406,3] MFSI 0:0: Access error on port 7, stat=000100000000
[266914629111,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[266915662133,3] I2C: Failed to read the MODE_REG
[266916661356,3] I2C: Failed to program the MODE_REG
[267051102516,3] ELOG: Error getting buffer to log error
)
[267052136718,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[267052139434,3] ELOG: Error getting buffer to log error
[267183941545,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[267184964428,3] MFSI 0:0: Access error on port 7, stat=000100000000
[267185975857,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[267186997892,3] I2C: Failed to read the MODE_REG
[267317038225,3] I2C: Failed to program the MODE_REG
[267317080314,3] ELOG: Error getting buffer to log error
[267318134785,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[267318137517,3] ELOG: Error getting buffer to log error
[267320210386,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[267450248701,3] MFSI 0:0: Access error on port 7, stat=000100000000
[267451261454,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[267452309978,3] I2C: Failed to read the MODE_REG
[267453311915,3] I2C: Failed to program the MODE_REG
[267578417150,3] ELOG: Error getting buffer to log error
[267579475107,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[267579477836,3] ELOG: Error getting buffer to log error
[267721524747,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[267721569711,3] MFSI 0:0: Access error on port 7, stat=000100000000
[267723556767,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[267724585002,3] I2C: Failed to read the MODE_REG
[267724624888,3] I2C: Failed to program the MODE_REG
[267854773172,3] ELOG: Error getting buffer to log error
[267855819196,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[267855821967,3] ELOG: Error getting buffer to log error
[267857858797,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[267987825014,3] MFSI 0:0: Access error on port 7, stat=000100000000
[267988849844,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[267989888365,3] I2C: Failed to read the MODE_REG
[267990889023,3] I2C: Failed to program the MODE_REG
[267990932921,3] ELOG: Error getting buffer to log error
[268121004173,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[268121006911,3] ELOG: Error getting buffer to log error
[268122979268,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[268254082076,3] MFSI 0:0: Access error on port 7, stat=000100000000
[268255086137,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[268256102148,3] I2C: Failed to read the MODE_REG
[268257104900,3] I2C: Failed to program the MODE_REG
[268387242259,3] ELOG: Error getting buffer to log error
[268388311084,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[268388314215,3] ELOG: Error getting buffer to log error
[268390339192,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[268520282387,3] MFSI 0:0: Access error on port 7, stat=000100000000
[268521309409,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[268522317896,3] I2C: Failed to read the MODE_REG
[268522358733,3] I2C: Failed to program the MODE_REG
[268683222070,3] ELOG: Error getting buffer to log error
[268684279268,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[268684281994,3] ELOG: Error getting buffer to log error
[268686278036,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[268817246338,3] MFSI 0:0: Access error on port 7, stat=000100000000
[268818249887,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[268819341493,3] I2C: Failed to read the MODE_REG
[268820377019,3] I2C: Failed to program the MODE_REG
[268950430764,3] ELOG: Error getting buffer to log error
[268951561556,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[268951564294,3] ELOG: Error getting buffer to log error
[268958068248,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[268958112799,3] MFSI 0:0: Access error on port 7, stat=000100000000
[269080351319,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[269081367564,3] I2C: Failed to read the MODE_REG
[269081407165,3] I2C: Failed to program the MODE_REG
[269093268865,3] ELOG: Error getting buffer to log error
[269216683344,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[269216686084,3] ELOG: Error getting buffer to log error
[269218675990,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[269349710257,3] MFSI 0:0: Access error on port 7, stat=000100000000
[269350738465,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[269351768799,3] I2C: Failed to read the MODE_REG
[269352802399,3] I2C: Failed to program the MODE_REG
[269352845457,3] ELOG: Error getting buffer to log error
[269482894783,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[269482897522,3] ELOG: Error getting buffer to log error
[269484937764,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[269485994233,3] MFSI 0:0: Access error on port 7, stat=000100000000
[269616065203,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[269617111698,3] I2C: Failed to read the MODE_REG
[269618116145,3] I2C: Failed to program the MODE_REG
[269619134983,3] ELOG: Error getting buffer to log error
[269749118944,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[269749121684,3] ELOG: Error getting buffer to log error
[269751113453,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[269882241767,3] MFSI 0:0: Access error on port 7, stat=000100000000
[269883266991,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[269884297038,3] I2C: Failed to read the MODE_REG
[269885291855,3] I2C: Failed to program the MODE_REG
[270015304469,3] ELOG: Error getting buffer to log error
[270015386082,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[270015388831,3] ELOG: Error getting buffer to log error
[270017437801,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[270018501743,3] MFSI 0:0: Access error on port 7, stat=000100000000
[270148472463,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[270149491886,3] I2C: Failed to read the MODE_REG
[270150525420,3] I2C: Failed to program the MODE_REG
[270151565412,3] ELOG: Error getting buffer to log error
[270281611342,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[270281614077,3] ELOG: Error getting buffer to log error
[270283604050,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[270414639091,3] MFSI 0:0: Access error on port 7, stat=000100000000
[270415658652,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[270416682175,3] I2C: Failed to read the MODE_REG
[270416722575,3] I2C: Failed to program the MODE_REG
[270417773664,3] ELOG: Error getting buffer to log error
[270547849765,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[270547852498,3] ELOG: Error getting buffer to log error
[270549922767,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[270550946653,3] MFSI 0:0: Access error on port 7, stat=000100000000
[270680993584,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[270682095359,3] I2C: Failed to read the MODE_REG
[270683169910,3] I2C: Failed to program the MODE_REG
[270683212103,3] ELOG: Error getting buffer to log error
[270813171709,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[270813174446,3] ELOG: Error getting buffer to log error
[270815159069,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[270816180692,3] MFSI 0:0: Access error on port 7, stat=000100000000
[270947474507,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[270948501295,3] I2C: Failed to read the MODE_REG
[270949494828,3] I2C: Failed to program the MODE_REG
[270950606147,3] ELOG: Error getting buffer to log error
[271080341838,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[271080351580,3] ELOG: Error getting buffer to log error
[271082481583,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[271083546179,3] MFSI 0:0: Access error on port 7, stat=000100000000
[271213446959,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[271216049559,3] I2C: Failed to read the MODE_REG
[271217100431,3] I2C: Failed to program the MODE_REG
[271217157608,3] ELOG: Error getting buffer to log error
[271218297124,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[271218299855,3] ELOG: Error getting buffer to log error
[271343194570,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[271344187815,3] MFSI 0:0: Access error on port 7, stat=000100000000
[271475281846,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[271476314705,3] I2C: Failed to read the MODE_REG
[271477398870,3] I2C: Failed to program the MODE_REG
[271478447519,3] ELOG: Error getting buffer to log error
[271608501084,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[271608503807,3] ELOG: Error getting buffer to log error
[271610527892,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[271611547340,3] MFSI 0:0: Access error on port 7, stat=000100000000
[271740785284,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[271741807780,3] I2C: Failed to read the MODE_REG
[271742860489,3] I2C: Failed to program the MODE_REG
[271742902586,3] ELOG: Error getting buffer to log error
[271743943361,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[271743946063,3] ELOG: Error getting buffer to log error
[271885267155,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[271886284927,3] MFSI 0:0: Access error on port 7, stat=000100000000
[272017240376,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[272018247067,3] I2C: Failed to read the MODE_REG
[272019337743,3] I2C: Failed to program the MODE_REG
[272020380214,3] ELOG: Error getting buffer to log error
[272020461372,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[272020464095,3] ELOG: Error getting buffer to log error
[272151499757,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[272152542452,3] MFSI 0:0: Access error on port 7, stat=000100000000
[272153706545,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[272278449254,3] I2C: Failed to read the MODE_REG
[272279477169,3] I2C: Failed to program the MODE_REG
[272280486916,3] ELOG: Error getting buffer to log error
[272421745178,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[272421747893,3] ELOG: Error getting buffer to log error
[272423755023,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[272424774241,3] MFSI 0:0: Access error on port 7, stat=000100000000
[272554893807,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[272555888367,3] I2C: Failed to read the MODE_REG
[272555927170,3] I2C: Failed to program the MODE_REG
[272557003738,3] ELOG: Error getting buffer to log error
[272558047037,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[272558049743,3] ELOG: Error getting buffer to log error
[272689054839,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[272690078504,3] MFSI 0:0: Access error on port 7, stat=000100000000
[272691106502,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[272821170194,3] I2C: Failed to read the MODE_REG
[272822193663,3] I2C: Failed to program the MODE_REG
[272823248671,3] ELOG: Error getting buffer to log error
[272954264255,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[272954266975,3] ELOG: Error getting buffer to log error
[272956324229,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[272957326450,3] MFSI 0:0: Access error on port 7, stat=000100000000
[272957378481,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[273087395982,3] I2C: Failed to read the MODE_REG
[273088400847,3] I2C: Failed to program the MODE_REG
[273089469387,3] ELOG: Error getting buffer to log error
[273090546337,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[273090557371,3] ELOG: Error getting buffer to log error
[273221479593,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[273222512948,3] MFSI 0:0: Access error on port 7, stat=000100000000
[273223554471,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[273353603120,3] I2C: Failed to read the MODE_REG
[273354644410,3] I2C: Failed to program the MODE_REG
[273359983502,3] ELOG: Error getting buffer to log error
Do [273360384082,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[273360395443,3] ELOG: Error getting buffer to log error
you want to sc[273482650239,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[273483684862,3] MFSI 0:0: Access error on port 7, stat=000100000000
[273624957827,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[273625997207,3] I2C: Failed to read the MODE_REG
[273627072916,3] I2C: Failed to program the MODE_REG
[273627123898,3] ELOG: Error getting buffer to log error
an it? ([273628219064,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[273628228847,3] ELOG: Error getting buffer to log error
[273754001894,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[273755017607,3] MFSI 0:0: Access error on port 7, stat=000100000000
[273756052891,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[273896327124,3] I2C: Failed to read the MODE_REG
[273897331029,3] I2C: Failed to program the MODE_REG
[273898357302,3] ELOG: Error getting buffer to log error
YES/no[273899468239,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[273899478770,3] ELOG: Error getting buffer to log error
[274030517942,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[274031524790,3] MFSI 0:0: Access error on port 7, stat=000100000000
[274162539822,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[274163570591,3] I2C: Failed to read the MODE_REG
[274164623445,3] I2C: Failed to program the MODE_REG
[274164678046,3] ELOG: Error getting buffer to log error
/selec[274165788287,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[274165796983,3] ELOG: Error getting buffer to log error
[274297965855,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[274298024812,3] MFSI 0:0: Access error on port 7, stat=000100000000
[274299061961,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[274429324863,3] I2C: Failed to read the MODE_REG
[274430335646,3] I2C: Failed to program the MODE_REG
[274431408214,3] ELOG: Error getting buffer to log error
[274432533652,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[274432542765,3] ELOG: Error getting buffer to log error
[274432939667,7] opal_ipmi_send(cmd: 0x30 netfn: 0x04 len: 0x0a)
[274715475496,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[274715531125,3] MFSI 0:0: Access error on port 7, stat=000100000000
[274716591671,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[274717621267,3] I2C: Failed to read the MODE_REG
[274718638545,3] I2C: Failed to program the MODE_REG
[274848627034,3] ELOG: Error getting buffer to log error

Handled by driver `at24' (already l[274849922443,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[274849933702,3] ELOG: Error getting buffer to log error
oaded), chip type`24c02'
   [274981725146,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
 (not[274982780142,3] MFSI 0:0: Access error on port 6, stat=000100000000
e: this is[274983822724,3] CENTAUR 80000005: MFSI write error -6 writing CMD
 probably NO[274984864086,3] I2C: Failed to disable the sensor cache
T a sensor chip!)

N[275114989346,3] ELOG: Error getting buffer to log error
ext ad[275116083764,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[275116094703,3] ELOG: Error getting buffer to log error
[275248015071,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[275248070126,3] MFSI 0:0: Access error on port 6, stat=000100000000
[275250101760,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[275381070703,3] I2C: Failed to read the MODE_REG
[275381120035,3] I2C: Failed to program the MODE_REG
[275382194204,3] ELOG: Error getting buffer to log error
apter: cen_80000005_e0p0 (i2c-7)
[275383308479,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[275383318697,3] ELOG: Error getting buffer to log error
[275514246640,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[275515336683,3] MFSI 0:0: Access error on port 6, stat=000100000000
[275516519803,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[275647538954,3] I2C: Failed to read the MODE_REG
[275647589151,3] I2C: Failed to program the MODE_REG
[275652969021,3] ELOG: Error getting buffer to log error
[275654097263,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[275654106895,3] ELOG: Error getting buffer to log error
[276115151366,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[276116180649,3] MFSI 0:0: Access error on port 6, stat=000100000000
[276117206911,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[276256617759,3] I2C: Failed to read the MODE_REG
[276257654450,3] I2C: Failed to program the MODE_REG
[276258681997,3] ELOG: Error getting buffer to log error
[276258789245,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[276258798971,3] ELOG: Error getting buffer to log error
[276390792831,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[276390850335,3] MFSI 0:0: Access error on port 6, stat=000100000000
[276391881407,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[276392897303,3] I2C: Failed to read the MODE_REG
[276522935381,3] I2C: Failed to program the MODE_REG
[276523935282,3] ELOG: Error getting buffer to log error
[276525227631,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[276525237899,3] ELOG: Error getting buffer to log error
[276656259750,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[276657280535,3] MFSI 0:0: Access error on port 6, stat=000100000000
[276658449053,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[276659474352,3] I2C: Failed to read the MODE_REG
[276789240991,3] I2C: Failed to program the MODE_REG
[276789293795,3] ELOG: Error getting buffer to log error
[276790364665,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[276790375167,3] ELOG: Error getting buffer to log error
[276917158455,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[276918185003,3] MFSI 0:0: Access error on port 6, stat=000100000000
[276919296205,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[276920329961,3] I2C: Failed to read the MODE_REG
[277060519954,3] I2C: Failed to program the MODE_REG
[277061551443,3] ELOG: Error getting buffer to log error
[277062662639,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[277062672463,3] ELOG: Error getting buffer to log error
[277193615259,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[277194640703,3] MFSI 0:0: Access error on port 6, stat=000100000000
[277195692920,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[277196723027,3] I2C: Failed to read the MODE_REG
[277196772879,3] I2C: Failed to program the MODE_REG
[277326784334,3] ELOG: Error getting buffer to log error
[277327847837,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[277327857963,3] ELOG: Error getting buffer to log error
[277459843791,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[277460878335,3] MFSI 0:0: Access error on port 6, stat=000100000000
[277462044864,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[277463087646,3] I2C: Failed to read the MODE_REG
[277593042561,3] I2C: Failed to program the MODE_REG
[277594092509,3] ELOG: Error getting buffer to log error
[277595199164,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[277595209720,3] ELOG: Error getting buffer to log error
[277726052663,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[277726110491,3] MFSI 0:0: Access error on port 6, stat=000100000000
[277728094396,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[277729131989,3] I2C: Failed to read the MODE_REG
[277729183054,3] I2C: Failed to program the MODE_REG
[277859256354,3] ELOG: Error getting buffer to log error
[277860322910,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[277860333140,3] ELOG: Error getting buffer to log error
[277992312494,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[277993339364,3] MFSI 0:0: Access error on port 6, stat=000100000000
[277994433585,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[277995461663,3] I2C: Failed to read the MODE_REG
[278125498828,3] I2C: Failed to program the MODE_REG
[278126555231,3] ELOG: Error getting buffer to log error
[278127644983,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[278127654737,3] ELOG: Error getting buffer to log error
[278132459289,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[278253479741,3] MFSI 0:0: Access error on port 6, stat=000100000000
[278254572543,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[278255585856,3] I2C: Failed to read the MODE_REG
[278256644791,3] I2C: Failed to program the MODE_REG
[278391687059,3] ELOG: Error getting buffer to log error
[278392824306,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[278392833613,3] ELOG: Error getting buffer to log error
[278534115140,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[278535157155,3] MFSI 0:0: Access error on port 6, stat=000100000000
[278536208006,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[278537214614,3] I2C: Failed to read the MODE_REG
[278668157119,3] I2C: Failed to program the MODE_REG
[278668213701,3] ELOG: Error getting buffer to log error
[278669354124,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[278669363965,3] ELOG: Error getting buffer to log error
[278671378393,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[278801331839,3] MFSI 0:0: Access error on port 6, stat=000100000000
[278802432465,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[278804488767,3] I2C: Failed to read the MODE_REG
[278804535350,3] I2C: Failed to program the MODE_REG
[278934416500,3] ELOG: Error getting buffer to log error
[278935540076,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[278935543599,3] ELOG: Error getting buffer to log error
[278937659989,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[279067527080,3] MFSI 0:0: Access error on port 6, stat=000100000000
[279068557290,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[279069588588,3] I2C: Failed to read the MODE_REG
[279200687613,3] I2C: Failed to program the MODE_REG
[279201749800,3] ELOG: Error getting buffer to log error
[279201864010,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[279201872482,3] ELOG: Error getting buffer to log error
[279203851124,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[279333795164,3] MFSI 0:0: Access error on port 6, stat=000100000000
[279334903567,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[279335937770,3] I2C: Failed to read the MODE_REG
[279336999726,3] I2C: Failed to program the MODE_REG
[279466880145,3] ELOG: Error getting buffer to log error
[279467977139,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[279467986153,3] ELOG: Error getting buffer to log error
[279470057484,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[279600029914,3] MFSI 0:0: Access error on port 6, stat=000100000000
[279601081188,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[279602114468,3] I2C: Failed to read the MODE_REG
[279732179384,3] I2C: Failed to program the MODE_REG
[279732239717,3] ELOG: Error getting buffer to log error
[279733328919,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[279733337619,3] ELOG: Error getting buffer to log error
[279735422367,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[279866263189,3] MFSI 0:0: Access error on port 6, stat=000100000000
[279867373128,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[279868383087,3] I2C: Failed to read the MODE_REG
[279869476335,3] I2C: Failed to program the MODE_REG
[279999398622,3] ELOG: Error getting buffer to log error
[280000501065,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[280000510237,3] ELOG: Error getting buffer to log error
[280002612668,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[280132512071,3] MFSI 0:0: Access error on port 6, stat=000100000000
[280133543768,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[280134589407,3] I2C: Failed to read the MODE_REG
[280135654377,3] I2C: Failed to program the MODE_REG
[280135714607,3] ELOG: Error getting buffer to log error
[280265678437,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[280265687110,3] ELOG: Error getting buffer to log error
[280267781569,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[280398746211,3] MFSI 0:0: Access error on port 6, stat=000100000000
[280403335887,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[280404378591,3] I2C: Failed to read the MODE_REG
[280405423979,3] I2C: Failed to program the MODE_REG
[280527695047,3] ELOG: Error getting buffer to log error
[280528783811,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[280528792271,3] ELOG: Error getting buffer to log error
[280530874975,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[280530935996,3] MFSI 0:0: Access error on port 6, stat=000100000000
[280666223764,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[280667332484,3] I2C: Failed to read the MODE_REG
[280667385021,3] I2C: Failed to program the MODE_REG
[280668443866,3] ELOG: Error getting buffer to log error
[280798185251,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[280798194517,3] ELOG: Error getting buffer to log error
[280800348343,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[280931212395,3] MFSI 0:0: Access error on port 6, stat=000100000000
[280932281535,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[280933313683,3] I2C: Failed to read the MODE_REG
[280934369820,3] I2C: Failed to program the MODE_REG
[281064345396,3] ELOG: Error getting buffer to log error
[281065435069,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[281065444058,3] ELOG: Error getting buffer to log error
[281067465711,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[281197420583,3] MFSI 0:0: Access error on port 6, stat=000100000000
[281198465467,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[281199560092,3] I2C: Failed to read the MODE_REG
[281199616947,3] I2C: Failed to program the MODE_REG
[281200750742,3] ELOG: Error getting buffer to log error
[281330809135,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[281330818262,3] ELOG: Error getting buffer to log error
[281332861855,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[281333891686,3] MFSI 0:0: Access error on port 6, stat=000100000000
[281473966140,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[281475006336,3] I2C: Failed to read the MODE_REG
[281476057389,3] I2C: Failed to program the MODE_REG
[281607059031,3] ELOG: Error getting buffer to log error
[281608160737,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[281608169206,3] ELOG: Error getting buffer to log error
[281610193459,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[281740173857,3] MFSI 0:0: Access error on port 6, stat=000100000000
[281740249020,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[281741284874,3] I2C: Failed to read the MODE_REG
[281742368437,3] I2C: Failed to program the MODE_REG
[281743422772,3] ELOG: Error getting buffer to log error
[281873393167,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[281873401933,3] ELOG: Error getting buffer to log error
[281875486255,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[281876516306,3] MFSI 0:0: Access error on port 6, stat=000100000000
[282006440024,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[282007480879,3] I2C: Failed to read the MODE_REG
[282008526799,3] I2C: Failed to program the MODE_REG
[282138599563,3] ELOG: Error getting buffer to log error
Do y[282138976677,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[282138985305,3] ELOG: Error getting buffer to log error
ou want to sca[282141747663,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
n it? (YES/no/selecti[282272624110,3] MFSI 0:0: Access error on port 6, stat=000100000000
[282273697427,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[282274798911,3] I2C: Failed to read the MODE_REG
[282275851250,3] I2C: Failed to program the MODE_REG
[282405847650,3] ELOG: Error getting buffer to log error
[282405958565,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[282405968335,3] ELOG: Error getting buffer to log error
[282408002767,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[282409027122,3] MFSI 0:0: Access error on port 6, stat=000100000000
[282538926943,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[282540936953,3] I2C: Failed to read the MODE_REG
[282540984667,3] I2C: Failed to program the MODE_REG
[282545665310,3] ELOG: Error getting buffer to log error
vely): Client found at ad[282677266117,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[282677275823,3] ELOG: Error getting buffer to log error
[282679274922,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[282820471404,3] MFSI 0:0: Access error on port 6, stat=000100000000
[282821504719,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[282822596918,3] I2C: Failed to read the MODE_REG
[282823601873,3] I2C: Failed to program the MODE_REG
[282953678510,3] ELOG: Error getting buffer to log error
dress 0x52
Handled by driver `at24' ([282954831078,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[282954840300,3] ELOG: Error getting buffer to log error
[283081595590,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[283081652986,3] MFSI 0:0: Access error on port 6, stat=000100000000
[283082688856,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[283083716393,3] I2C: Failed to read the MODE_REG
[283084722321,3] I2C: Failed to program the MODE_REG
[283225015972,3] ELOG: Error getting buffer to log error
already loaded), chip type`24c02'
  [283226265295,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[283226275159,3] ELOG: Error getting buffer to log error
  (note: this [283359401359,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[283360492641,3] MFSI 0:0: Access error on port 6, stat=000100000000
[283361522682,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[283491230335,3] I2C: Failed to read the MODE_REG
[283491271887,3] I2C: Failed to program the MODE_REG
[283492314553,3] ELOG: Error getting buffer to log error
is probably NOT a sensor[283493565849,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[283493575631,3] ELOG: Error getting buffer to log error
 chip!)

Next adapter: cen_8[283625332703,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[283626390624,3] MFSI 0:0: Access error on port 6, stat=000100000000
[283627416328,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[283757467621,3] I2C: Failed to read the MODE_REG
[283758491343,3] I2C: Failed to program the MODE_REG
[283758534082,3] ELOG: Error getting buffer to log error
[283759568047,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[283759576921,3] ELOG: Error getting buffer to log error
000000[283890623052,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[283891719750,3] MFSI 0:0: Access error on port 6, stat=000100000000
[284023696126,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[284023750863,3] I2C: Failed to read the MODE_REG
[284024758676,3] I2C: Failed to program the MODE_REG
[284025794463,3] ELOG: Error getting buffer to log error
5_e0p1 ([284026852959,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[284026856834,3] ELOG: Error getting buffer to log error
i2c-8)
[284157849175,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[284158878377,3] MFSI 0:0: Access error on port 6, stat=000100000000
[284159889968,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[284289950960,3] I2C: Failed to read the MODE_REG
[284291068628,3] I2C: Failed to program the MODE_REG
[284292090143,3] ELOG: Error getting buffer to log error
[284423196879,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[284423207310,3] ELOG: Error getting buffer to log error
[284424338656,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[284425429354,3] MFSI 0:0: Access error on port 6, stat=000100000000
[284426604607,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[284566451155,3] I2C: Failed to read the MODE_REG
[284567460359,3] I2C: Failed to program the MODE_REG
[284568490989,3] ELOG: Error getting buffer to log error
[284569549315,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[284569559799,3] ELOG: Error getting buffer to log error
[284700581065,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[284701610570,3] MFSI 0:0: Access error on port 6, stat=000100000000
[284702646881,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[284832704112,3] I2C: Failed to read the MODE_REG
[284837797497,3] I2C: Failed to program the MODE_REG
[284837851654,3] ELOG: Error getting buffer to log error
[284838920213,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[284838930556,3] ELOG: Error getting buffer to log error
[284960697297,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[284961726613,3] MFSI 0:0: Access error on port 6, stat=000100000000
[284962735791,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[285104101827,3] I2C: Failed to read the MODE_REG
[285105103135,3] I2C: Failed to program the MODE_REG
[285106321967,3] ELOG: Error getting buffer to log error
[285107373191,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[285107382381,3] ELOG: Error getting buffer to log error
[285238185803,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[285239215399,3] MFSI 0:0: Access error on port 6, stat=000100000000
[285240242167,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[285370294337,3] I2C: Failed to read the MODE_REG
[285371346770,3] I2C: Failed to program the MODE_REG
[285371401364,3] ELOG: Error getting buffer to log error
[285372452635,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[285372463032,3] ELOG: Error getting buffer to log error
[285503401117,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[285504512268,3] MFSI 0:0: Access error on port 6, stat=000100000000
[285505541153,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[285636615759,3] I2C: Failed to read the MODE_REG
[285637661834,3] I2C: Failed to program the MODE_REG
[285638747089,3] ELOG: Error getting buffer to log error
[285639831906,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[285639842060,3] ELOG: Error getting buffer to log error
[285770668131,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[285771774259,3] MFSI 0:0: Access error on port 6, stat=000100000000
[285772786055,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[285902735359,3] I2C: Failed to read the MODE_REG
[285902783126,3] I2C: Failed to program the MODE_REG
[285903837791,3] ELOG: Error getting buffer to log error
[285904911314,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[285904920812,3] ELOG: Error getting buffer to log error
[286035890825,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[286036984705,3] MFSI 0:0: Access error on port 6, stat=000100000000
[286037992951,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[286162951471,3] I2C: Failed to read the MODE_REG
[286164004316,3] I2C: Failed to program the MODE_REG
[286165080856,3] ELOG: Error getting buffer to log error
[286166203866,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[286166207373,3] ELOG: Error getting buffer to log error
[286308243889,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[286309274200,3] MFSI 0:0: Access error on port 6, stat=000100000000
[286309341312,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[286310348198,3] I2C: Failed to read the MODE_REG
[286440375341,3] I2C: Failed to program the MODE_REG
[286441425087,3] ELOG: Error getting buffer to log error
[286442506284,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[286442514991,3] ELOG: Error getting buffer to log error
[286573482391,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[286574593190,3] MFSI 0:0: Access error on port 6, stat=000100000000
[286575613826,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[286576822368,3] I2C: Failed to read the MODE_REG
[286706629655,3] I2C: Failed to program the MODE_REG
[286707730030,3] ELOG: Error getting buffer to log error
[286708817881,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[286708826779,3] ELOG: Error getting buffer to log error
[286839753170,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[286840804660,3] MFSI 0:0: Access error on port 6, stat=000100000000
[286841846818,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[286972796943,3] I2C: Failed to read the MODE_REG
[286972851400,3] I2C: Failed to program the MODE_REG
[286973914815,3] ELOG: Error getting buffer to log error
[286975006662,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[286975013951,3] ELOG: Error getting buffer to log error
[287100854896,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[287101903596,3] MFSI 0:0: Access error on port 6, stat=000100000000
[287102997850,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[287104011650,3] I2C: Failed to read the MODE_REG
[287244219157,3] I2C: Failed to program the MODE_REG
[287245278501,3] ELOG: Error getting buffer to log error
[287245385887,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[287245395095,3] ELOG: Error getting buffer to log error
[287377397508,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[287377459621,3] MFSI 0:0: Access error on port 6, stat=000100000000
[287379560639,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[287510440977,3] I2C: Failed to read the MODE_REG
[287510493369,3] I2C: Failed to program the MODE_REG
[287511610060,3] ELOG: Error getting buffer to log error
[287512682777,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[287512691729,3] ELOG: Error getting buffer to log error
[287649672337,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[287650692723,3] MFSI 0:0: Access error on port 6, stat=000100000000
[287651812531,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[287653160063,3] I2C: Failed to read the MODE_REG
[287787379961,3] I2C: Failed to program the MODE_REG
[287788415485,3] ELOG: Error getting buffer to log error
[287788523424,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[287788532759,3] ELOG: Error getting buffer to log error
[287790539615,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[287920435732,3] MFSI 0:0: Access error on port 6, stat=000100000000
[287921478399,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[287922577325,3] I2C: Failed to read the MODE_REG
[288053215352,3] I2C: Failed to program the MODE_REG
[288054358783,3] ELOG: Error getting buffer to log error
[288055493253,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[288055502303,3] ELOG: Error getting buffer to log error
[288186294623,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[288187331485,3] MFSI 0:0: Access error on port 6, stat=000100000000
[288188341772,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[288189384314,3] I2C: Failed to read the MODE_REG
[288319398052,3] I2C: Failed to program the MODE_REG
[288319458765,3] ELOG: Error getting buffer to log error
[288320524713,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[288320533834,3] ELOG: Error getting buffer to log error
[288322557943,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[288452524220,3] MFSI 0:0: Access error on port 6, stat=000100000000
[288453571167,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[288454697310,3] I2C: Failed to read the MODE_REG
[288455705166,3] I2C: Failed to program the MODE_REG
[288585741140,3] ELOG: Error getting buffer to log error
[288586824681,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[288586833701,3] ELOG: Error getting buffer to log error
[288718732620,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[288719788716,3] MFSI 0:0: Access error on port 6, stat=000100000000
[288720825156,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[288721867519,3] I2C: Failed to read the MODE_REG
[288851885560,3] I2C: Failed to program the MODE_REG
[288852912661,3] ELOG: Error getting buffer to log error
[288853020403,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[288853029740,3] ELOG: Error getting buffer to log error
[288855027386,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[288985042751,3] MFSI 0:0: Access error on port 6, stat=000100000000
[288986082428,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[288987118975,3] I2C: Failed to read the MODE_REG
[288988130486,3] I2C: Failed to program the MODE_REG
[289118193883,3] ELOG: Error getting buffer to log error
[289119276424,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[289119284975,3] ELOG: Error getting buffer to log error
[289246077497,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[289247217158,3] MFSI 0:0: Access error on port 6, stat=000100000000
[289249799915,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[289251593443,3] I2C: Failed to read the MODE_REG
[289251647562,3] I2C: Failed to program the MODE_REG
[289385088188,3] ELOG: Error getting buffer to log error
[289386148410,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[289386156715,3] ELOG: Error getting buffer to log error
[289388177611,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[289518460038,3] MFSI 0:0: Access error on port 6, stat=000100000000
[289519477695,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[289520505600,3] I2C: Failed to read the MODE_REG
[289521655759,3] I2C: Failed to program the MODE_REG
[289655760095,3] ELOG: Error getting buffer to log error
[289656893656,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[289656902751,3] ELOG: Error getting buffer to log error
[289658942927,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[289788828452,3] MFSI 0:0: Access error on port 6, stat=000100000000
[289789885154,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[289790921208,3] I2C: Failed to read the MODE_REG
[289921969593,3] I2C: Failed to program the MODE_REG
[289922030920,3] ELOG: Error getting buffer to log error
[289923111960,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[289923121190,3] ELOG: Error getting buffer to log error
[289925123266,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[290055087140,3] MFSI 0:0: Access error on port 6, stat=000100000000
[290056113900,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[290057135295,3] I2C: Failed to read the MODE_REG
[290058247695,3] I2C: Failed to program the MODE_REG
[290188230079,3] ELOG: Error getting buffer to log error
[290189366607,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[290189375923,3] ELOG: Error getting buffer to log error
[290191514059,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[290321277238,3] MFSI 0:0: Access error on port 6, stat=000100000000
[290322334255,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[290323362396,3] I2C: Failed to read the MODE_REG
[290323418735,3] I2C: Failed to program the MODE_REG
[290454532197,3] ELOG: Error getting buffer to log error
Do you want to scan it? [290455953725,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[290455962940,3] ELOG: Error getting buffer to log error
(YES/no/selectively): Client f[290587519990,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[290588571318,3] MFSI 0:0: Access error on port 6, stat=000100000000
[290589620154,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[290590733535,3] I2C: Failed to read the MODE_REG
[290720700879,3] I2C: Failed to program the MODE_REG
[290720759395,3] ELOG: Error getting buffer to log error
[290721892653,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[290721901025,3] ELOG: Error getting buffer to log error
ound a[290724011342,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
t add[290853967776,3] MFSI 0:0: Access error on port 6, stat=000100000000
[290855976449,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[290857010095,3] I2C: Failed to read the MODE_REG
[290857063592,3] I2C: Failed to program the MODE_REG
[290997243593,3] ELOG: Error getting buffer to log error
ress 0x52
Handled by driver `at24'[290998345983,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[290998355044,3] ELOG: Error getting buffer to log error
 (already loaded), chip type`[291131308591,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[291136261494,3] MFSI 0:0: Access error on port 6, stat=000100000000
[291137304994,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[291258317578,3] I2C: Failed to read the MODE_REG
[291259340596,3] I2C: Failed to program the MODE_REG
[291260396607,3] ELOG: Error getting buffer to log error
24c02'
    (note: this is probably NOT a sensor chip!)
[291261557677,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[291261568191,3] ELOG: Error getting buffer to log error
[291402810701,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[291403907698,3] MFSI 0:0: Access error on port 6, stat=000100000000
[291409022266,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[291867615423,3] I2C: Failed to read the MODE_REG
[291868617800,3] I2C: Failed to program the MODE_REG
[291869737844,3] ELOG: Error getting buffer to log error
[292000734630,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[292000745343,3] ELOG: Error getting buffer to log error
[292002763389,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[292003962991,3] MFSI 0:0: Access error on port 6, stat=000100000000
[292133804218,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[292134825504,3] I2C: Failed to read the MODE_REG
[292135862232,3] I2C: Failed to program the MODE_REG
[292135919823,3] ELOG: Error getting buffer to log error

Next adapter: p8_00000000_e0p0 (i2c-9)
Do you want to scan it? (YES/no/selectively): Client found at address 0x50
Handled by driver `at24' (already loaded), chip type`24c128'
    (note: this is probably NOT a sensor chip!)
Client found at address 0x51
Handled by driver `at24' (already loaded), chip type`24c128'
    (note: this is probably NOT a sensor chip!)

Next adapter: p8_00000000_e0p1 (i2c-10)
Do you want to scan it? (YES/no/selectively): Client found at address 0x50
Handled by driver `at24' (already loaded), chip type`24c128'
    (note: this is probably NOT a sensor chip!)
Client found at address 0x51
Handled by driver `at24' (already loaded), chip type`24c128'
    (note: this is probably NOT a sensor chip!)

Next adapter: p8_00000000_e1p2 (i2c-11)
Do you want to scan it? (YES/no/selectively): Client found at address 0x50
Handled by driver `at24' (already loaded), chip type`24c128'
    (note: this is probably NOT a sensor chip!)

Now follows a summary of the probes I have just done.
Just press ENTER to continue: 
Driver `to-be-written':
- ISA bus, address 0xca0
  Chip `IPMI BMC KCS' (confidence: 4)
- ISA bus, address 0xca8
  Chip `IPMI BMC SMIC' (confidence: 4)

Note: there is no driver for IPMI BMC KCS yet.
Check http://www.lm-sensors.org/wiki/Devices for updates.

No modules to load, skipping modules configuration.

[root@ite037 xscom-utils]# [  485.998195] INFO: rcu_sched detected stalls on CPUs/tasks: { 39} (detected by 9, t=6004 jiffies, g=1298, c=1297, q=0)
[  485.998284] Task dump for CPU 39:
[  485.998309] swapper/39      R  running task        0     0      1 0x00000808
[  485.998356] Call Trace:
[  485.998374] [c000003c5cac7b80] [c000000001123130] .TOC.+0x0/0xed0 (unreliable)

[root@ite037 xscom-utils]# 
[root@ite037 xscom-utils]# 
[root@ite037 xscom-utils]# ./getscom -l
Chip ID  | Rev   | Chip type
---------|-------|--------
[345007029178,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[345007039565,3] ELOG: Error getting buffer to log error
[345008897727,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[345010099039,3] MFSI 0:0: Access error on port 6, stat=000100000000
[345011132377,3] CENTAUR 80000005: MFSI write error -6 writing CMD
[345012309830,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[345012320006,3] ELOG: Error getting buffer to log error
[345014550672,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[345015569423,3] MFSI 0:0: Access error on port 7, stat=000100000000
[345016579078,3] CENTAUR 80000004: MFSI write error -6 writing CMD
[345022035348,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[345022044892,3] ELOG: Error getting buffer to log error
[345024876148,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[345025897397,3] MFSI 0:0: Access error on port 2, stat=000100000000
[345026986994,3] CENTAUR 80000001: MFSI write error -6 writing CMD
[345029374895,3] XSCOM: write error gcid=0x0 pcb_addr=0x20000 stat=0x7
[345029384446,3] ELOG: Error getting buffer to log error
[345034655037,3] MFSI 0:0: XSCOM error -6 writing OPB CMD
[345035688603,3] MFSI 0:0: Access error on port 3, stat=000100000000
[345036721007,3] CENTAUR 80000000: MFSI write error -6 writing CMD
00000000 | DD2.0 | P8 (Venice) processor
[root@ite037 xscom-utils]# [  666.068189] INFO: rcu_sched detected stalls on CPUs/tasks: { 39} (detected by 49, t=24011 jiffies, g=1298, c=1297, q=0)
[  666.068392] Task dump for CPU 39:
[  666.068546] swapper/39      R  running task        0     0      1 0x00000808
[  666.068591] Call Trace:
[  666.068609] [c000003c5cac7b80] [c000000001123130] .TOC.+0x0/0xed0 (unreliable)

[root@ite037 xscom-utils]# 
[root@ite037 xscom-utils]# 
[root@ite037 xscom-utils]# 
[root@ite037 xscom-utils]# 
[root@ite037 xscom-utils]# 
[root@ite037 xscom-utils]# 
[root@ite037 xscom-utils]# reboot
[  758.995964] INFO: task opal-prd:3266 blocked for more than 120 seconds.
[  758.996117] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  758.996190] opal-prd        D 00003fff7e912d38     0  3266      1 0x00040080
[  758.996305] Call Trace:
[  758.996339] [c000003c3df4b790] [c000003c3df4b7d0] 0xc000003c3df4b7d0 (unreliable)
[  758.996392] [c000003c3df4b960] [c0000000000164f8] __switch_to+0x268/0x450
[  758.996441] [c000003c3df4b9c0] [c0000000009425b4] __schedule+0x324/0xa40
[  758.996486] [c000003c3df4ba90] [c00000000093eba8] schedule_timeout+0x388/0x460
[  758.996537] [c000003c3df4bb90] [c000000000943328] wait_for_completion+0x148/0x1d0
[  758.996593] [c000003c3df4bc10] [c00000000010ba98] wait_rcu_gp+0x68/0x80
[  758.996638] [c000003c3df4bc70] [c0000000001d395c] synchronize_sched+0x5c/0x80
[  758.996688] [c000003c3df4bc90] [d00000001ce736f8] ipmi_destroy_user+0x3b8/0x3c0 [ipmi_msghandler]
[  758.996748] [c000003c3df4bd10] [d00000001d5c030c] ipmi_release+0x2c/0xa0 [ipmi_devintf]
[  758.996801] [c000003c3df4bd50] [c0000000002fe824] ____fput+0xd4/0x2e0
[  758.996846] [c000003c3df4bdb0] [c00000000010b714] task_work_run+0xe4/0x160
[  758.996891] [c000003c3df4be00] [c0000000000186ec] do_notify_resume+0xcc/0x100
[  758.996936] [c000003c3df4be30] [c00000000000a730] ret_from_except_lite+0x5c/0x60
PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
[  OK  ] Started Show Plymouth Reboot Screen.
[  846.158186] INFO: rcu_sched detected stalls on CPUs/tasks: { 39} (detected by 12, t=42020 jiffies, g=1298, c=1297, q=0)
[  846.158593] Task dump for CPU 39:
[  846.158660] swapper/39      R  running task        0     0      1 0x0000080c
[  846.158743] Call Trace:
[  846.158778] [c000003c5cac7b80] [c000000001123130] .TOC.+0x0/0xed0 (unreliable)
[  878.988305] INFO: task opal-prd:3266 blocked for more than 120 seconds.
[  878.988512] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  878.988723] opal-prd        D 00003fff7e912d38     0  3266      1 0x00040082
[  878.988794] Call Trace:
[  878.988834] [c000003c3df4b790] [c000003c3df4b7d0] 0xc000003c3df4b7d0 (unreliable)
[  878.988915] [c000003c3df4b960] [c0000000000164f8] __switch_to+0x268/0x450
[  878.988986] [c000003c3df4b9c0] [c0000000009425b4] __schedule+0x324/0xa40
[  878.989056] [c000003c3df4ba90] [c00000000093eba8] schedule_timeout+0x388/0x460
[  878.989134] [c000003c3df4bb90] [c000000000943328] wait_for_completion+0x148/0x1d0
[  878.989215] [c000003c3df4bc10] [c00000000010ba98] wait_rcu_gp+0x68/0x80
[  878.989286] [c000003c3df4bc70] [c0000000001d395c] synchronize_sched+0x5c/0x80
[  878.989358] [c000003c3df4bc90] [d00000001ce736f8] ipmi_destroy_user+0x3b8/0x3c0 [ipmi_msghandler]
[  878.989450] [c000003c3df4bd10] [d00000001d5c030c] ipmi_release+0x2c/0xa0 [ipmi_devintf]
[  878.989531] [c000003c3df4bd50] [c0000000002fe824] ____fput+0xd4/0x2e0
[  878.989600] [c000003c3df4bdb0] [c00000000010b714] task_work_run+0xe4/0x160
[  878.989668] [c000003c3df4be00] [c0000000000186ec] do_notify_resume+0xcc/0x100
[  878.989739] [c000003c3df4be30] [c00000000000a730] ret_from_except_lite+0x5c/0x60
[  976.218179] BUG: soft lockup - CPU#10 stuck for 23s! [systemd-journal:1226]
[  976.218386] Modules linked in: ibmpowernv ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ipmi_devintf i2c_dev ses enclosure sg rtc_opal ofpart ipmi_powernv at24 powernv_flash ipmi_msghandler mtd powernv_rng opal_prd i2c_opal shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c tg3 ptp sr_mod cdrom sd_mod crc_t10dif crct10dif_generic crct10dif_common ast syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm ahci libahci libata usb_storage aacraid i2c_core pps_core dm_mirror dm_region_hash dm_log dm_mod
[  976.219615] CPU: 10 PID: 1226 Comm: systemd-journal Not tainted 3.10.0-327.el7.ppc64le #1
[  976.219684] task: c000003c52d81390 ti: c000003c52104000 task.ti: c000003c52104000
[  976.219755] NIP: c000000000945b10 LR: c0000000008bd708 CTR: c0000000008bd340
[  976.219823] REGS: c000003c521076d0 TRAP: 0901   Not tainted  (3.10.0-327.el7.ppc64le)
[  976.219892] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 24002444  XER: 20000000
[  976.220066] CFAR: c000000000945b28 SOFTE: 1 
GPR00: c0000000008bd708 c000003c52107950 c000000001123130 c000000003982b58 
GPR04: 0000000000000001 c000003c521079cc c000003c521079d8 c000003c521079e0 
GPR08: c000003c59740680 0000000080000020 0000000000000000 0000000000000001 
GPR12: 0000000024002442 c000000007b65a00 
[  976.220488] NIP [c000000000945b10] _raw_spin_lock+0x60/0xc0
[  976.220663] LR [c0000000008bd708] unix_dgram_recvmsg+0x3c8/0x580
[  976.220720] Call Trace:
[  976.220749] [c000003c52107950] [0000000040000040] 0x40000040 (unreliable)
[  976.220820] [c000003c52107980] [c0000000008bd708] unix_dgram_recvmsg+0x3c8/0x580
[  976.220904] [c000003c52107a50] [c00000000078d1c4] sock_recvmsg+0x104/0x150
[  976.220975] [c000003c52107bc0] [c00000000078dc30] ___sys_recvmsg+0x140/0x310
[  976.221045] [c000003c52107d50] [c000000000793fc4] SyS_recvmsg+0xc4/0x130
[  976.221115] [c000003c52107dd0] [c00000000079487c] SyS_socketcall+0x3cc/0x430
[  976.221186] [c000003c52107e30] [c00000000000a17c] system_call+0x38/0xb4
[  976.221253] Instruction dump:
[  976.221289] 40c20010 7d40192d 40c2fff0 7c2004ac 2fa90000 40de0018 38210030 e8010010 
[  976.221406] ebe1fff8 7c0803a6 4e800020 7c210b78 <e92d0000> 89290009 792affe3 4082003c 
[  979.588176] INFO: rcu_sched detected stalls on CPUs/tasks: { 39} (detected by 10, t=109779 jiffies, g=1298, c=1297, q=0)
[  979.588527] Task dump for CPU 39:
[  979.588602] swapper/39      R  running task        0     0      1 0x0000080c
[  979.588671] Call Trace:
[  979.588698] [c000003c5cac7b80] [c000000001123130] .TOC.+0x0/0xed0 (unreliable)
[  979.588869] INFO: task kworker/0:2:974 blocked for more than 120 seconds.
[  979.588935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  979.589013] kworker/0:2     D 0000000000000000     0   974      2 0x00000800
[  979.589096] Workqueue: ipv6_addrconf addrconf_verify_work
[  979.589161] Call Trace:
[  979.589192] [c000000003f93840] [c00000000093ea38] schedule_timeout+0x218/0x460 (unreliable)
[  979.589297] [c000000003f93a10] [c0000000000164f8] __switch_to+0x268/0x450
[  979.589378] [c000000003f93a70] [c0000000009425b4] __schedule+0x324/0xa40
[  979.589459] [c000000003f93b40] [c0000000009442c4] schedule_preempt_disabled+0x34/0xb0
[  979.589551] [c000000003f93b60] [c00000000094094c] __mutex_lock_slowpath+0x10c/0x2b0
[  979.589644] [c000000003f93be0] [c000000000940b54] mutex_lock+0x64/0x70
[  979.589725] [c000000003f93c10] [c0000000007d3700] rtnl_lock+0x20/0x40
[  979.589804] [c000000003f93c30] [c0000000008d6098] addrconf_verify_work+0x18/0x40
[  979.589896] [c000000003f93c50] [c000000000103cec] process_one_work+0x1dc/0x680
[  979.589988] [c000000003f93cf0] [c000000000104310] worker_thread+0x180/0x500
[  979.590069] [c000000003f93d80] [c00000000011061c] kthread+0xec/0x100
[  979.590149] [c000000003f93e30] [c00000000000a474] ret_from_kernel_thread+0x5c/0x68
[  979.590243] INFO: task opal-prd:3266 blocked for more than 120 seconds.
[  979.590308] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  979.590385] opal-prd        D 00003fff7e912d38     0  3266      1 0x00040082
[  979.590600] Call Trace:
[  979.590632] [c000003c3df4b790] [c000003c3df4b7d0] 0xc000003c3df4b7d0 (unreliable)
[  979.590725] [c000003c3df4b960] [c0000000000164f8] __switch_to+0x268/0x450
[  979.590805] [c000003c3df4b9c0] [c0000000009425b4] __schedule+0x324/0xa40
[  979.590885] [c000003c3df4ba90] [c00000000093eba8] schedule_timeout+0x388/0x460
[  979.590977] [c000003c3df4bb90] [c000000000943328] wait_for_completion+0x148/0x1d0
[  979.591069] [c000003c3df4bc10] [c00000000010ba98] wait_rcu_gp+0x68/0x80
[  979.591148] [c000003c3df4bc70] [c0000000001d395c] synchronize_sched+0x5c/0x80
[  979.591230] [c000003c3df4bc90] [d00000001ce736f8] ipmi_destroy_user+0x3b8/0x3c0 [ipmi_msghandler]
[  979.591336] [c000003c3df4bd10] [d00000001d5c030c] ipmi_release+0x2c/0xa0 [ipmi_devintf]
[  979.591429] [c000003c3df4bd50] [c0000000002fe824] ____fput+0xd4/0x2e0
[  979.591509] [c000003c3df4bdb0] [c00000000010b714] task_work_run+0xe4/0x160
[  979.591590] [c000003c3df4be00] [c0000000000186ec] do_notify_resume+0xcc/0x100
[  979.591670] [c000003c3df4be30] [c00000000000a730] ret_from_except_lite+0x5c/0x60
[  979.591760] INFO: task dbus-daemon:3273 blocked for more than 120 seconds.
[  979.591825] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  979.591902] dbus-daemon     D 00003fffaa9f22ec     0  3273      1 0x00040080
[  979.591982] Call Trace:
[  979.592012] [c000003c3df53a40] [c0000000000164f8] __switch_to+0x268/0x450
[  979.592092] [c000003c3df53aa0] [c0000000009425b4] __schedule+0x324/0xa40
[  979.592172] [c000003c3df53b70] [c0000000009442c4] schedule_preempt_disabled+0x34/0xb0
[  979.592264] [c000003c3df53b90] [c00000000094094c] __mutex_lock_slowpath+0x10c/0x2b0
[  979.592356] [c000003c3df53c10] [c000000000940b54] mutex_lock+0x64/0x70
[  979.592436] [c000003c3df53c40] [c00000000080043c] netlink_release+0x5c/0x630
[  979.592515] [c000003c3df53ce0] [c00000000078f118] sock_close+0x48/0x130
[  979.592594] [c000003c3df53d50] [c0000000002fe824] ____fput+0xd4/0x2e0
[  979.592805] [c000003c3df53db0] [c00000000010b714] task_work_run+0xe4/0x160
[  979.592886] [c000003c3df53e00] [c0000000000186ec] do_notify_resume+0xcc/0x100
[  979.592966] [c000003c3df53e30] [c00000000000a730] ret_from_except_lite+0x5c/0x60
[  979.593056] INFO: task dbus-daemon:3300 blocked for more than 120 seconds.
[  979.593122] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  979.595585] dbus-daemon     D 00003fffaa8d8058     0  3300      1 0x00042082
[  979.597826] Call Trace:
[  979.597857] [c000003c4588b510] [c000003c4588b5a0] 0xc000003c4588b5a0 (unreliable)
[  979.602132] [c000003c4588b6e0] [c0000000000164f8] __switch_to+0x268/0x450
[  979.604081] [c000003c4588b740] [c0000000009425b4] __schedule+0x324/0xa40
[  979.609177] [c000003c4588b810] [c00000000093eba8] schedule_timeout+0x388/0x460
[  979.611261] [c000003c4588b910] [c000000000943328] wait_for_completion+0x148/0x1d0
[  979.613327] [c000003c4588b990] [c00000000010ba98] wait_rcu_gp+0x68/0x80
[  979.618431] [c000003c4588b9f0] [c0000000001d395c] synchronize_sched+0x5c/0x80
[  979.620857] [c000003c4588ba10] [c0000000004bfbc8] rhashtable_remove+0x258/0x290
[  979.623354] [c000003c4588ba60] [c000000000800460] netlink_release+0x80/0x630
[  979.626345] [c000003c4588bb00] [c00000000078f118] sock_close+0x48/0x130
[  979.628472] [c000003c4588bb70] [c0000000002fe824] ____fput+0xd4/0x2e0
[  979.632861] [c000003c4588bbd0] [c00000000010b714] task_work_run+0xe4/0x160
[  979.635422] [c000003c4588bc20] [c0000000000f383c] get_signal_to_deliver+0x91c/0xa20
[  979.637483] [c000003c4588bd10] [c00000000001828c] do_signal+0x5c/0x320
[  979.639514] [c000003c4588be00] [c0000000000186ac] do_notify_resume+0x8c/0x100
[  979.643602] [c000003c4588be30] [c00000000000a730] ret_from_except_lite+0x5c/0x60
[  979.646083] INFO: task login:3366 blocked for more than 120 seconds.
[  979.660415] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  979.662513] login           D 00003fff9749925c     0  3366      1 0x00040080
[  979.664715] Call Trace:
[  979.666663] [c000003c21eb35a0] [c000003c21eb3630] 0xc000003c21eb3630 (unreliable)
[  979.668864] [c000003c21eb3770] [c0000000000164f8] __switch_to+0x268/0x450
[  979.670884] [c000003c21eb37d0] [c0000000009425b4] __schedule+0x324/0xa40
[  979.675446] [c000003c21eb38a0] [c0000000009442c4] schedule_preempt_disabled+0x34/0xb0
[  979.677556] [c000003c21eb38c0] [c00000000094094c] __mutex_lock_slowpath+0x10c/0x2b0
[  979.679615] [c000003c21eb3940] [c000000000940b54] mutex_lock+0x64/0x70
[  979.683908] [c000003c21eb3970] [c00000000080121c] netlink_autobind.isra.26+0x29c/0x3c0
[  979.686606] [c000003c21eb3a40] [c000000000804b68] netlink_sendmsg+0x2e8/0x970
[  979.688962] [c000003c21eb3b30] [c00000000078d00c] sock_sendmsg+0xec/0x140
[  979.690972] [c000003c21eb3ca0] [c00000000079312c] SyS_sendto+0x15c/0x240
[  979.695070] [c000003c21eb3dd0] [c000000000794788] SyS_socketcall+0x2d8/0x430
[  979.697144] [c000003c21eb3e30] [c00000000000a17c] system_call+0x38/0xb4
[  979.699191] INFO: task NetworkManager:3390 blocked for more than 120 seconds.
[  979.701280] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  979.705557] NetworkManager  D 00003fffa4c42944     0  3390      1 0x00040080
[  979.707583] Call Trace:
[  979.707614] [c000003c21eb6bf0] [c000003c21eb6c80] 0xc000003c21eb6c80 (unreliable)
[  979.709667] [c000003c21eb6dc0] [c0000000000164f8] __switch_to+0x268/0x450
[  979.713867] [c000003c21eb6e20] [c0000000009425b4] __schedule+0x324/0xa40
[  979.716987] [c000003c21eb6ef0] [c00000000093eba8] schedule_timeout+0x388/0x460
[  979.719104] [c000003c21eb6ff0] [c000000000943328] wait_for_completion+0x148/0x1d0
[  979.723200] [c000003c21eb7070] [c0000000001a2578] try_stop_cpus+0xb8/0x120
[  979.723281] [c000003c21eb70e0] [c0000000001d36bc] synchronize_sched_expedited+0x1bc/0x380
[  979.727708] [c000003c21eb7140] [c0000000007b5f64] synchronize_net+0x54/0x70
[  979.729893] [c000003c21eb7160] [c0000000007f0a68] dev_deactivate_many+0x488/0x4b0
[  979.734102] [c000003c21eb71f0] [c0000000007b9238] __dev_close_many+0xd8/0x1b0
[  979.736623] [c000003c21eb7280] [c0000000007b95ec] __dev_close+0x5c/0xa0
[  979.738699] [c000003c21eb72d0] [c0000000007c148c] __dev_change_flags+0x3fc/0x520
[  979.740796] [c000003c21eb7370] [c0000000007c15e4] dev_change_flags+0x34/0x220
[  979.742963] [c000003c21eb73f0] [c0000000007d799c] do_setlink+0x3bc/0x980
[  979.748346] [c000003c21eb74d0] [c0000000007d9e3c] rtnl_newlink+0x8ec/0xa60
[  979.750364] [c000003c21eb77a0] [c0000000007d6bb0] rtnetlink_rcv_msg+0xc0/0x2f0
[  979.752467] [c000003c21eb7830] [c000000000803b98] netlink_rcv_skb+0x128/0x140
[  979.754470] [c000003c21eb7870] [c0000000007d6acc] rtnetlink_rcv+0x3c/0x60
[  979.758675] [c000003c21eb78a0] [c000000000803708] netlink_unicast+0x548/0x610
[  979.760770] [c000003c21eb7950] [c000000000804c40] netlink_sendmsg+0x3c0/0x970
[  979.762826] [c000003c21eb7a40] [c00000000078d00c] sock_sendmsg+0xec/0x140
[  979.765045] [c000003c21eb7bb0] [c00000000078e72c] ___sys_sendmsg+0x36c/0x380
[  979.767149] [c000003c21eb7d50] [c000000000793ad4] SyS_sendmsg+0xc4/0x130
[  979.771103] [c000003c21eb7dd0] [c00000000079485c] SyS_socketcall+0x3ac/0x430
[  979.773190] [c000003c21eb7e30] [c00000000000a17c] system_call+0x38/0xb4
[  979.775918] INFO: task postfix:5818 blocked for more than 120 seconds.
[  979.778010] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  979.782284] postfix         D 00003fff951a8c5c     0  5818      1 0x00040080
[  979.784386] Call Trace:
[  979.784493] [c000003c21ee3990] [c0000000000164f8] __switch_to+0x268/0x450
[  979.786609] [c000003c21ee39f0] [c0000000009425b4] __schedule+0x324/0xa40
[  979.791316] [c000003c21ee3ac0] [c0000000009442c4] schedule_preempt_disabled+0x34/0xb0
[  979.793631] [c000003c21ee3ae0] [c00000000094094c] __mutex_lock_slowpath+0x10c/0x2b0
[  979.804522] [c000003c21ee3b60] [c000000000940b54] mutex_lock+0x64/0x70
[  979.807693] [c000003c21ee3b90] [c00000000080121c] netlink_autobind.isra.26+0x29c/0x3c0
[  979.811820] [c000003c21ee3c60] [c000000000803fc4] netlink_bind+0x414/0x600
[  979.814028] [c000003c21ee3cf0] [c000000000792620] SyS_bind+0x1a0/0x1e0
[  979.816187] [c000003c21ee3dd0] [c00000000079464c] SyS_socketcall+0x19c/0x430
[  979.818284] [c000003c21ee3e30] [c00000000000a17c] system_call+0x38/0xb4
[  OK  ] Unmounted RPC Pipe File System.
[  OK  ] Started Restore /run/initramfs.
[ !!  ] Forcibly rebooting as result of failure.

open-power / op-build

when system in runtime, issuing of mc reset cold results in xscom write/read errors for sensors command. #482

modprobe ibmpowernv

lsmod | grep -i powernv

sensors

sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)

DMI data unavailable, please consider installing dmidecode 2.7

or later for better results.