search

open-sdr / openwifi-hw

open-source IEEE 802.11 WiFi baseband FPGA (chip) design: FPGA, hardware
GNU Affero General Public License v3.0
675 stars 233 forks source link

Bitstream Generation Problem #59

Closed chubohao closed 2 years ago

chubohao commented 2 years ago

image

Hello,

I did all step successfully, but when I generated the bitstream, I have these problem? Do you konw what should I do?

Thanks in advance

Bohao

JiaoXianjun commented 2 years ago

If you did all steps correctly, then you should not have any issue.

To answer your question, you have to paste here what you have done exactly in each step starting from "git clone": what is your command, what is the output, etc.

Only having that, we can help you.

chubohao commented 2 years ago

Hi Dr.Jiao,

thanks for your reply.

Here are my steps.

OS: Ubuntu 20.04 LTS, Vivdao : 2018.3 (At first I downloaded 2022, but some scripts don't work)

  1. git clone image

  2. Export 2 environment variables image

  3. Pepare ADI IP library image

  4. Compile ADI IP image Building is OK image

  5. Get the openofdm_rx into ip directory image

  6. Generate ip_repo for the top level FPGA project image VIVADO GUI is open and it is turned on and off several times in a row. image

  7. source ./openwifi.tcl This command was inputed into the tcl console of VIVADO. image

  8. Generate Bitstream Here is the message. image image

Thanks in advance.

Bohao

JiaoXianjun commented 2 years ago

what about "Pre-conditions" we listed in the README?

chubohao commented 2 years ago

what about "Pre-conditions" we listed in the README?

Ohhh! '' Install the evaluation license of [Xilinx Viterbi Decoder] into Vivado. "

Thanks Dr.Jiao

chenmo234 commented 4 months ago

I am using E310 to deploy openwifi. Can I ask you some questions? Here is my contact information: c2385405729.