sdr0 not showing up - Githubissues

sdr0 not showing up for openwifi img on [ADRV9364-Z7020 + ADRV1CRR-BOB (LVDS mode)]. Tried to reflash image, tried retriggering udev, tried re-running ./openwifi/setup_once.sh. Cannot find the problem. Below are some outputs

dmesg output

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.0-98248-g1bbe32fa5182-dirty (jxj@jxj-pc) (arm-xilinx-linux-gnueabi-gcc.real (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.0.20200730) #3 SMP PREEMPT Tue Feb 7 16:53:49 CET 2023 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Analog Devices ADRV9364-Z7020 (Z7020/AD9364) [ 0.000000] OF: fdt: earlycon: stdout-path /amba@0/uart@E0001000 not found [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 128 MiB at 0x16800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 15 pages/cpu s29900 r8192 d23348 u61440 [ 0.000000] pcpu-alloc: s29900 r8192 d23348 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyPS0,115200 root=/dev/mmcblk0p2 rw earlycon rootfstype=ext4 rootwait clk_ignore_unused cpuidle.off=1 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 371420K/524288K available (8192K kernel code, 803K rwdata, 5732K rodata, 1024K init, 151K bss, 21796K reserved, 131072K cma-reserved, 0K highmem) [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] efuse mapped to (ptrval) [ 0.000000] slcr mapped to (ptrval) [ 0.000000] L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 [ 0.000000] random: get_random_bytes called from start_kernel+0x33c/0x4dc with crng_init=0 [ 0.000000] zynq_clock_init: clkc starts at (ptrval) [ 0.000000] Zynq clock init [ 0.000009] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns [ 0.000029] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns [ 0.000056] Switching to timer-based delay loop, resolution 3ns [ 0.000145] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns [ 0.000183] timer #0 at (ptrval), irq=25 [ 0.000762] Console: colour dummy device 80x30 [ 0.000791] Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) [ 0.000808] pid_max: default: 32768 minimum: 301 [ 0.000981] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000995] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001632] CPU: Testing write buffer coherency: ok [ 0.001667] CPU0: Spectre v2: using BPIALL workaround [ 0.001830] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002332] Setting up static identity map for 0x100000 - 0x100060 [ 0.002470] rcu: Hierarchical SRCU implementation. [ 0.002758] smp: Bringing up secondary CPUs ... [ 0.003534] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.003545] CPU1: Spectre v2: using BPIALL workaround [ 0.003683] smp: Brought up 1 node, 2 CPUs [ 0.003696] SMP: Total of 2 processors activated (1333.33 BogoMIPS). [ 0.003703] CPU: All CPU(s) started in SVC mode. [ 0.004172] devtmpfs: initialized [ 0.008437] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.008931] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.008957] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.015085] pinctrl core: initialized pinctrl subsystem [ 0.016222] NET: Registered protocol family 16 [ 0.018355] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.019673] thermal_sys: Registered thermal governor 'step_wise' [ 0.035845] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.035864] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.036014] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0x(ptrval) [ 0.036821] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 33, base_baud = 6249999) is a xuartps [ 0.417174] printk: console [ttyPS0] enabled [ 0.453617] SCSI subsystem initialized [ 0.456322] usbcore: registered new interface driver usbfs [ 0.461145] usbcore: registered new interface driver hub [ 0.465263] usbcore: registered new device driver usb [ 0.469640] mc: Linux media interface: v0.10 [ 0.472733] videodev: Linux video capture interface: v2.00 [ 0.477070] pps_core: LinuxPPS API ver. 1 registered [ 0.480758] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.488607] PTP clock support registered [ 0.491981] jesd204: found 0 devices and 0 topologies [ 0.495786] FPGA manager framework [ 0.497967] Advanced Linux Sound Architecture Driver Initialized. [ 0.505139] clocksource: Switched to clocksource arm_global_timer [ 0.523291] NET: Registered protocol family 2 [ 0.527049] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.534114] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.540625] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.546555] TCP: Hash tables configured (established 4096 bind 4096) [ 0.551667] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.556945] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.562781] NET: Registered protocol family 1 [ 0.566287] hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing. [ 0.573082] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.581862] Initialise system trusted keyrings [ 0.585198] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.697413] Key type asymmetric registered [ 0.700204] Asymmetric key parser 'x509' registered [ 0.703783] io scheduler mq-deadline registered [ 0.707021] io scheduler kyber registered [ 0.710071] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized [ 0.720088] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330 [ 0.725517] dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 [ 0.743549] brd: module loaded [ 0.754181] loop: module loaded [ 0.759755] spi-nor spi1.0: SPI-NOR-UniqueID 104473f8b70a0003f0ff2200b5b018e7ad [ 0.766130] spi-nor spi1.0: found n25q256ax1, expected n25q256a [ 0.771065] spi-nor spi1.0: trying to lock already unlocked area [ 0.776157] spi-nor spi1.0: n25q256ax1 (32768 Kbytes) [ 0.779949] 6 fixed-partitions partitions found on MTD device spi1.0 [ 0.784989] Creating 6 MTD partitions on "spi1.0": [ 0.788568] 0x000000000000-0x0000000e0000 : "qspi-fsbl-uboot" [ 0.796097] 0x0000000e0000-0x000000100000 : "qspi-uboot-env" [ 0.806141] 0x000000100000-0x000000600000 : "qspi-linux" [ 0.816026] 0x000000600000-0x000000620000 : "qspi-device-tree" [ 0.826090] 0x000000620000-0x000001300000 : "qspi-rootfs" [ 0.836109] 0x000001300000-0x000002000000 : "qspi-bitstream" [ 0.846401] MACsec IEEE 802.1AE [ 0.848864] libphy: Fixed MDIO Bus: probed [ 0.854653] tun: Universal TUN/TAP device driver, 1.6 [ 0.860168] libphy: MACB_mii_bus: probed [ 0.863958] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 36 (00:05:f7:80:30:7a) [ 0.873190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.878528] usbcore: registered new interface driver usb-storage [ 0.883354] usbcore: registered new interface driver usbserial_generic [ 0.888630] usbserial: USB Serial support registered for generic [ 0.893373] usbcore: registered new interface driver ftdi_sio [ 0.897854] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.975164] ULPI transceiver vendor/product ID 0x0424/0x0007 [ 0.979517] Found SMSC USB3320 ULPI transceiver. [ 0.982831] ULPI integrity check: passed. [ 0.985561] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 0.989154] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.015151] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.019986] hub 1-0:1.0: USB hub found [ 1.022470] hub 1-0:1.0: 1 port detected [ 1.027328] i2c /dev entries driver [ 1.031111] at24 0-0050: supply vcc not found, using dummy regulator [ 1.037115] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.042987] IR NEC protocol handler initialized [ 1.046279] IR RC5(x/sz) protocol handler initialized [ 1.050015] IR RC6 protocol handler initialized [ 1.053234] IR JVC protocol handler initialized [ 1.056461] IR Sony protocol handler initialized [ 1.059761] IR SANYO protocol handler initialized [ 1.063146] IR Sharp protocol handler initialized [ 1.066563] IR MCE Keyboard/mouse protocol handler initialized [ 1.071080] IR XMP protocol handler initialized [ 1.074636] usbcore: registered new interface driver uvcvideo [ 1.079111] USB Video Class driver (1.1.1) [ 1.081897] gspca_main: v2.14.0 registered [ 1.085776] cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s [ 1.092060] Xilinx Zynq CpuIdle Driver started [ 1.095225] failed to register cpuidle driver [ 1.098599] sdhci: Secure Digital Host Controller Interface driver [ 1.103466] sdhci: Copyright(c) Pierre Ossman [ 1.106532] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.112309] ledtrig-cpu: registered to indicate activity on CPUs [ 1.117137] hid: raw HID events driver (C) Jiri Kosina [ 1.124542] usbcore: registered new interface driver usbhid [ 1.129667] usbhid: USB HID core driver [ 1.138066] mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA [ 1.149183] fpga_manager fpga0: Xilinx Zynq FPGA Manager registered [ 1.159842] xt_time: kernel timezone is -0000 [ 1.163432] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 1.169180] NET: Registered protocol family 17 [ 1.172569] Registering SWP/SWPB emulation handler [ 1.176380] Loading compiled-in X.509 certificates [ 1.190154] mmc0: new high speed SDXC card at address aaaa [ 1.196143] mmcblk0: mmc0:aaaa SC512 477 GiB [ 1.196412] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.201453] mmcblk0: p1 p2 p3 [ 1.205749] clk: Not disabling unused clocks [ 1.209039] ALSA device list: [ 1.210741] No soundcards found. [ 1.249945] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.256832] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.269567] devtmpfs: mounted [ 1.272692] Freeing unused kernel memory: 1024K [ 1.295599] Run /sbin/init as init process [ 1.298387] with arguments: [ 1.298393] /sbin/init [ 1.298397] with environment: [ 1.298402] HOME=/ [ 1.298406] TERM=linux [ 1.432705] random: fast init done [ 1.872948] systemd[1]: System time before build time, advancing clock. [ 1.918946] systemd[1]: Failed to find module 'autofs4' [ 2.553422] NET: Registered protocol family 10 [ 2.557625] Segment Routing with IPv6 [ 2.583212] systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.606738] systemd[1]: Detected architecture arm. [ 2.656393] systemd[1]: Set hostname to . [ 4.435856] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 4.816472] systemd[1]: Queued start job for default target Graphical Interface. [ 4.824720] random: systemd: uninitialized urandom read (16 bytes read) [ 4.830396] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 4.841480] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 4.849806] systemd[1]: Created slice system-getty.slice. [ 4.885374] random: systemd: uninitialized urandom read (16 bytes read) [ 4.891517] systemd[1]: Created slice system-modprobe.slice. [ 4.925346] random: systemd: uninitialized urandom read (16 bytes read) [ 4.931432] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.966103] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.005836] systemd[1]: Created slice User and Session Slice. [ 5.045845] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.085732] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.097351] systemd[1]: Reached target Slices. [ 5.125501] systemd[1]: Reached target Swap. [ 5.156641] systemd[1]: Listening on Syslog Socket. [ 5.186035] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.225707] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.290567] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.298294] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.336270] systemd[1]: Listening on Journal Socket. [ 5.373942] systemd[1]: Listening on udev Control Socket. [ 5.406052] systemd[1]: Listening on udev Kernel Socket. [ 5.446122] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.453599] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. [ 5.464727] systemd[1]: Mounting RPC Pipe File System... [ 5.498655] systemd[1]: Mounting Kernel Debug File System... [ 5.525887] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 5.533307] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 5.546729] systemd[1]: Starting Restore / save the current clock... [ 5.590753] systemd[1]: Starting Set the console keyboard layout... [ 5.625832] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 5.640765] systemd[1]: Starting Load Kernel Module configfs... [ 5.678891] systemd[1]: Starting Load Kernel Module drm... [ 5.708787] systemd[1]: Starting Load Kernel Module fuse... [ 5.739192] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.747440] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.759141] systemd[1]: Starting Journal Service... [ 5.791249] systemd[1]: Starting Load Kernel Modules... [ 5.838636] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.879419] systemd[1]: Starting Coldplug All udev Devices... [ 5.936097] systemd[1]: run-rpc_pipefs.mount: Mount process exited, code=exited, status=32/n/a [ 5.955313] systemd[1]: run-rpc_pipefs.mount: Failed with result 'exit-code'. [ 5.973215] systemd[1]: Failed to mount RPC Pipe File System. [ 6.055500] systemd[1]: Dependency failed for RPC security service for NFS server. [ 6.095566] systemd[1]: rpc-svcgssd.service: Job rpc-svcgssd.service/start failed with result 'dependency'. [ 6.104108] systemd[1]: Dependency failed for RPC security service for NFS client and server. [ 6.145390] systemd[1]: rpc-gssd.service: Job rpc-gssd.service/start failed with result 'dependency'. [ 6.170197] systemd[1]: Started Journal Service. [ 6.200759] random: crng init done [ 6.202862] random: 7 urandom warning(s) missed due to ratelimiting [ 6.579283] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.886484] systemd-journald[1088]: Received client request to flush runtime journal. [ 6.890683] systemd-journald[1088]: File /var/log/journal/9a314adf4f7b4c659ada5035385c9b39/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 9.190175] Registered mathworks_ip class [ 9.232380] mwipcore 43c00000.mwipcore: IRQ index 0 not found [ 9.232402] mwipcore 43c00000.mwipcore: Dev memory resource found at c380a01a 0000FFFF. [ 9.232432] mwipcore 43c00000.mwipcore: 'mwipcore' device not found, creating [ 9.232446] mwipcore 43c00000.mwipcore: Char dev region registered: major num:240 [ 9.232455] mwipcore 43c00000.mwipcore: 'mwipcore' device created [ 11.752526] macb e000b000.ethernet eth0: PHY [e000b000.ethernet-ffffffff:00] driver [Marvell 88E1510] (irq=POLL) [ 11.752545] macb e000b000.ethernet eth0: configuring for phy/rgmii-id link mode [ 12.103311] 8021q: 802.1Q VLAN Support v1.8 [ 12.664100] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.725216] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS [ 12.808376] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.829103] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 15.939739] macb e000b000.ethernet eth0: Link is Up - 1Gbps/Full - flow control tx [ 15.939787] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

./wgd.sh output

root@analog:~/openwifi# ./wgd.sh usage: Script for load (or download+load) different driver and FPGA img without rebooting no argument: Load .ko driver files and FPGA img (if system_top.bit.bin exist) in current dir with test_mode=0. 1st argument: If it is a NUMBER, it will be assigned to test_mode. Then load everything from current dir. 1st argument: If it is a string called "remote", it will download driver/FPGA and load everything.

2nd argument (if exist) is the target directory name for downloading and reloading
3rd argument (if exist) is the value for test_mode 1st argument: neither NUMBER nor "remote" nor a .tar.gz file, it is regarded as a directory and load everything from it.
2nd argument (if exist) is the value for test_mode 1st argument: a .tar.gz file, it will be unpacked then load from that unpacked directory
2nd argument (if exist) is the value for test_mode

Module Size Used by mac80211 565248 0 libarc4 16384 1 mac80211 xilinx_dma 28672 0 ad9361_drv 163840 2 cfg80211 319488 1 mac80211 8021q 24576 0 mwipcore 16384 0 mwipcore_iio_streaming 16384 1 mwipcore mwipcore_dma_streaming 20480 1 mwipcore mathworks_ip_common 16384 1 mwipcore ipv6 397312 28 TARGET_DIR ./ DOWNLOAD_FLAG 0 test_mode 0 tx_offset_tuning_enable 0 $TARGET_DIR is found!

hostapd: no process found dhcpd: no process found sdr0: ERROR while getting interface flags: No such device rmmod: ERROR: Module sdr is not currently loaded .//system_top.bit.bin not found. Skip reloading FPGA. tx_offset_tuning_enable 0 openwifi_ad9361_fir_tx_0MHz_11n.ftr tx_fir_enable 1 Found openwifi_ad9361_fir_tx_0MHz_11n.ftr

test -f /sys/bus/iio/devices/iio:device0/in_voltage_rf_bandwidth
test -f /sys/bus/iio/devices/iio:device1/in_voltage_rf_bandwidth
test -f /sys/bus/iio/devices/iio:device2/in_voltage_rf_bandwidth
test -f /sys/bus/iio/devices/iio:device3/in_voltage_rf_bandwidth
cd /sys/bus/iio/devices/iio:device3/
set +x FIR Rx: 48,1 Tx: 48,1 1 1 rx0 agc fast_attack slow_attack fast_attack rx1 agc fast_attack cat: in_voltage1_gain_control_mode: No such file or directory ./rf_init_11n.sh: 85: cannot create in_voltage1_gain_control_mode: Permission denied cat: in_voltage1_gain_control_mode: No such file or directory 40000000 25215513 40000000 25215414 rssi 97.75 dB cat: in_voltage1_rssi: No such file or directory rx0 gain to 70 72.000000 dB ./rf_init_11n.sh: 101: echo: echo: I/O error 72.000000 dB rx1 gain to 70 cat: in_voltage1_hardwaregain: No such file or directory ./rf_init_11n.sh: 106: cannot create in_voltage1_hardwaregain: Permission denied cat: in_voltage1_hardwaregain: No such file or directory tx0 gain -89dB -10.000000 dB -89.000000 dB tx1 gain 0dB cat: out_voltage1_hardwaregain: No such file or directory ./rf_init_11n.sh: 116: cannot create out_voltage1_hardwaregain: Permission denied cat: out_voltage1_hardwaregain: No such file or directory rmmod: ERROR: Module tx_intf is not currently loaded
insmod .//tx_intf.ko tx_intf is loaded! rmmod: ERROR: Module rx_intf is not currently loaded
insmod .//rx_intf.ko rx_intf is loaded! rmmod: ERROR: Module openofdm_tx is not currently loaded
insmod .//openofdm_tx.ko openofdm_tx is loaded! rmmod: ERROR: Module openofdm_rx is not currently loaded
insmod .//openofdm_rx.ko openofdm_rx is loaded! rmmod: ERROR: Module xpu is not currently loaded
insmod .//xpu.ko xpu is loaded! rmmod: ERROR: Module sdr is not currently loaded
insmod .//sdr.ko test_mode=0 sdr is loaded! the end

udevadm test ... output

root@analog:~# udevadm test ... This program is for debugging only, it does not run any program specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run.

Load module index Skipping empty file: /etc/systemd/network/99-default.link Skipping empty file: /etc/systemd/network/73-usb-net-by-mac.link Created link configuration context. Reading rules file: /usr/lib/udev/rules.d/10-local-rpi.rules Reading rules file: /etc/udev/rules.d/10-network-device.rules Reading rules file: /usr/lib/udev/rules.d/15-i2c-modprobe.rules Reading rules file: /usr/lib/udev/rules.d/40-usb_modeswitch.rules Reading rules file: /usr/lib/udev/rules.d/50-firmware.rules Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules Reading rules file: /etc/udev/rules.d/53-adi-m2k-usb.rules Reading rules file: /usr/lib/udev/rules.d/55-dm.rules Reading rules file: /usr/lib/udev/rules.d/56-hpmud.rules Reading rules file: /usr/lib/udev/rules.d/60-autosuspend.rules Reading rules file: /usr/lib/udev/rules.d/60-block.rules Reading rules file: /usr/lib/udev/rules.d/60-bridge-network-interface.rules Reading rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules Reading rules file: /usr/lib/udev/rules.d/60-crda.rules Reading rules file: /usr/lib/udev/rules.d/60-drm.rules Reading rules file: /usr/lib/udev/rules.d/60-evdev.rules Reading rules file: /usr/lib/udev/rules.d/60-fido-id.rules Reading rules file: /usr/lib/udev/rules.d/60-flashrom.rules Reading rules file: /usr/lib/udev/rules.d/60-gpsd.rules Reading rules file: /usr/lib/udev/rules.d/60-i2c-tools.rules Reading rules file: /usr/lib/udev/rules.d/60-input-id.rules Reading rules file: /usr/lib/udev/rules.d/60-libgphoto2-6.rules Reading rules file: /usr/lib/udev/rules.d/60-libsane1.rules Reading rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules Reading rules file: /usr/lib/udev/rules.d/60-persistent-input.rules Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage-dm.rules Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules Reading rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules Reading rules file: /usr/lib/udev/rules.d/60-rpi.gpio-common.rules Reading rules file: /usr/lib/udev/rules.d/60-sensor.rules Reading rules file: /usr/lib/udev/rules.d/60-serial.rules Reading rules file: /usr/lib/udev/rules.d/60-triggerhappy.rules Reading rules file: /usr/lib/udev/rules.d/61-gnome-settings-daemon-rfkill.rules Reading rules file: /usr/lib/udev/rules.d/61-mutter.rules Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules Reading rules file: /usr/lib/udev/rules.d/64-xorg-xkb.rules Reading rules file: /usr/lib/udev/rules.d/65-libwacom.rules Reading rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules Reading rules file: /usr/lib/udev/rules.d/69-libmtp.rules Reading rules file: /usr/lib/udev/rules.d/70-joystick.rules Reading rules file: /usr/lib/udev/rules.d/70-microbit.rules Reading rules file: /usr/lib/udev/rules.d/70-mouse.rules Reading rules file: /etc/udev/rules.d/70-persistent-net.rules Reading rules file: /usr/lib/udev/rules.d/70-power-switch.rules Reading rules file: /usr/lib/udev/rules.d/70-printers.rules Reading rules file: /usr/lib/udev/rules.d/70-touchpad.rules Reading rules file: /usr/lib/udev/rules.d/70-uaccess.rules Reading rules file: /usr/lib/udev/rules.d/71-ipp-usb.rules Reading rules file: /usr/lib/udev/rules.d/71-seat.rules Reading rules file: /usr/lib/udev/rules.d/73-seat-late.rules Reading rules file: /usr/lib/udev/rules.d/73-special-net-names.rules Reading rules file: /usr/lib/udev/rules.d/75-net-description.rules Reading rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules Reading rules file: /usr/lib/udev/rules.d/78-sound-card.rules Reading rules file: /usr/lib/udev/rules.d/80-debian-compat.rules Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules Reading rules file: /usr/lib/udev/rules.d/80-ifupdown.rules Reading rules file: /usr/lib/udev/rules.d/80-libinput-device-groups.rules Reading rules file: /usr/lib/udev/rules.d/80-net-setup-link.rules Reading rules file: /usr/lib/udev/rules.d/80-noobs.rules Reading rules file: /usr/lib/udev/rules.d/80-udisks2.rules Reading rules file: /usr/lib/udev/rules.d/85-hwclock.rules Reading rules file: /usr/lib/udev/rules.d/85-regulatory.rules Reading rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules Reading rules file: /usr/lib/udev/rules.d/90-console-setup.rules Reading rules file: /usr/lib/udev/rules.d/90-libiio.rules Reading rules file: /usr/lib/udev/rules.d/90-libinput-fuzz-override.rules Reading rules file: /usr/lib/udev/rules.d/90-pi-bluetooth.rules Reading rules file: /usr/lib/udev/rules.d/90-pipewire-alsa.rules Reading rules file: /usr/lib/udev/rules.d/95-cd-devices.rules Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules Reading rules file: /usr/lib/udev/rules.d/96-e2scrub.rules Reading rules file: /usr/lib/udev/rules.d/97-hid2hci.rules Reading rules file: /etc/udev/rules.d/99-com.rules Reading rules file: /usr/lib/udev/rules.d/99-libsane1.rules Reading rules file: /usr/lib/udev/rules.d/99-systemd.rules Reading rules file: /etc/udev/rules.d/99-udc.rules Failed to open device '/sys...': Invalid argument Unload module index Unloaded link configuration context.

root@analog:~/openwifi# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.0-98248-g1bbe32fa5182-dirty (jxj@jxj-pc) (arm-xilinx-linux-gnueabi-gcc.real (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.0.20200730) #3 SMP PREEMPT Tue Feb 7 16:53:49 CET 2023 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Analog Devices ADRV9364-Z7020 (Z7020/AD9364) [ 0.000000] OF: fdt: earlycon: stdout-path /amba@0/uart@E0001000 not found [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 128 MiB at 0x16800000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 15 pages/cpu s29900 r8192 d23348 u61440 [ 0.000000] pcpu-alloc: s29900 r8192 d23348 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyPS0,115200 root=/dev/mmcblk0p2 rw earlycon rootfstype=ext4 rootwait clk_ignore_unused cpuidle.off=1 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 371420K/524288K available (8192K kernel code, 803K rwdata, 5732K rodata, 1024K init, 151K bss, 21796K reserved, 131072K cma-reserved, 0K highmem) [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] efuse mapped to (ptrval) [ 0.000000] slcr mapped to (ptrval) [ 0.000000] L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 [ 0.000000] L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 [ 0.000000] random: get_random_bytes called from start_kernel+0x33c/0x4dc with crng_init=0 [ 0.000000] zynq_clock_init: clkc starts at (ptrval) [ 0.000000] Zynq clock init [ 0.000010] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns [ 0.000029] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns [ 0.000055] Switching to timer-based delay loop, resolution 3ns [ 0.000144] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns [ 0.000182] timer #0 at (ptrval), irq=25 [ 0.000760] Console: colour dummy device 80x30 [ 0.000788] Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) [ 0.000805] pid_max: default: 32768 minimum: 301 [ 0.000983] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000998] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001633] CPU: Testing write buffer coherency: ok [ 0.001668] CPU0: Spectre v2: using BPIALL workaround [ 0.001833] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002335] Setting up static identity map for 0x100000 - 0x100060 [ 0.002475] rcu: Hierarchical SRCU implementation. [ 0.002763] smp: Bringing up secondary CPUs ... [ 0.003543] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.003552] CPU1: Spectre v2: using BPIALL workaround [ 0.003688] smp: Brought up 1 node, 2 CPUs [ 0.003701] SMP: Total of 2 processors activated (1333.33 BogoMIPS). [ 0.003709] CPU: All CPU(s) started in SVC mode. [ 0.004174] devtmpfs: initialized [ 0.008426] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.008918] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.008946] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.015076] pinctrl core: initialized pinctrl subsystem [ 0.016208] NET: Registered protocol family 16 [ 0.018431] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.019778] thermal_sys: Registered thermal governor 'step_wise' [ 0.035878] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.035896] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.036043] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0x(ptrval) [ 0.036852] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 33, base_baud = 6249999) is a xuartps [ 0.417221] printk: console [ttyPS0] enabled [ 0.454128] SCSI subsystem initialized [ 0.456882] usbcore: registered new interface driver usbfs [ 0.462069] usbcore: registered new interface driver hub [ 0.466178] usbcore: registered new device driver usb [ 0.470232] mc: Linux media interface: v0.10 [ 0.473317] videodev: Linux video capture interface: v2.00 [ 0.477639] pps_core: LinuxPPS API ver. 1 registered [ 0.481317] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 0.489164] PTP clock support registered [ 0.492225] jesd204: found 0 devices and 0 topologies [ 0.496024] FPGA manager framework [ 0.498196] Advanced Linux Sound Architecture Driver Initialized. [ 0.504526] clocksource: Switched to clocksource arm_global_timer [ 0.519713] NET: Registered protocol family 2 [ 0.524924] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.531994] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.538678] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.544592] TCP: Hash tables configured (established 4096 bind 4096) [ 0.549719] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.555525] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.561392] NET: Registered protocol family 1 [ 0.564905] hw perfevents: no interrupt-affinity property for /pmu@f8891000, guessing. [ 0.571700] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.579837] Initialise system trusted keyrings [ 0.583116] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.698581] Key type asymmetric registered [ 0.701372] Asymmetric key parser 'x509' registered [ 0.704970] io scheduler mq-deadline registered [ 0.708193] io scheduler kyber registered [ 0.711252] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized [ 0.720443] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330 [ 0.725870] dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 [ 0.743330] brd: module loaded [ 0.753599] loop: module loaded [ 0.759139] spi-nor spi1.0: SPI-NOR-UniqueID 104473f8b70a0003f0ff2200b5b018e7ad [ 0.765185] spi-nor spi1.0: found n25q256ax1, expected n25q256a [ 0.770111] spi-nor spi1.0: trying to lock already unlocked area [ 0.774864] spi-nor spi1.0: n25q256ax1 (32768 Kbytes) [ 0.778656] 6 fixed-partitions partitions found on MTD device spi1.0 [ 0.783700] Creating 6 MTD partitions on "spi1.0": [ 0.787218] 0x000000000000-0x0000000e0000 : "qspi-fsbl-uboot" [ 0.795390] 0x0000000e0000-0x000000100000 : "qspi-uboot-env" [ 0.805590] 0x000000100000-0x000000600000 : "qspi-linux" [ 0.815376] 0x000000600000-0x000000620000 : "qspi-device-tree" [ 0.825413] 0x000000620000-0x000001300000 : "qspi-rootfs" [ 0.835435] 0x000001300000-0x000002000000 : "qspi-bitstream" [ 0.845649] MACsec IEEE 802.1AE [ 0.848103] libphy: Fixed MDIO Bus: probed [ 0.851734] tun: Universal TUN/TAP device driver, 1.6 [ 0.857258] libphy: MACB_mii_bus: probed [ 0.861054] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 36 (00:05:f7:80:30:7a) [ 0.870331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.875669] usbcore: registered new interface driver usb-storage [ 0.880505] usbcore: registered new interface driver usbserial_generic [ 0.885781] usbserial: USB Serial support registered for generic [ 0.890521] usbcore: registered new interface driver ftdi_sio [ 0.895009] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.954551] ULPI transceiver vendor/product ID 0x0424/0x0007 [ 0.958907] Found SMSC USB3320 ULPI transceiver. [ 0.962220] ULPI integrity check: passed. [ 0.964965] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 0.968556] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 0.994571] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 0.999420] hub 1-0:1.0: USB hub found [ 1.001902] hub 1-0:1.0: 1 port detected [ 1.006751] i2c /dev entries driver [ 1.010526] at24 0-0050: supply vcc not found, using dummy regulator [ 1.016528] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.022421] IR NEC protocol handler initialized [ 1.025711] IR RC5(x/sz) protocol handler initialized [ 1.029447] IR RC6 protocol handler initialized [ 1.032666] IR JVC protocol handler initialized [ 1.035893] IR Sony protocol handler initialized [ 1.039194] IR SANYO protocol handler initialized [ 1.042579] IR Sharp protocol handler initialized [ 1.045996] IR MCE Keyboard/mouse protocol handler initialized [ 1.050513] IR XMP protocol handler initialized [ 1.054073] usbcore: registered new interface driver uvcvideo [ 1.058543] USB Video Class driver (1.1.1) [ 1.061329] gspca_main: v2.14.0 registered [ 1.065209] cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer with timeout 10s [ 1.071481] Xilinx Zynq CpuIdle Driver started [ 1.074649] failed to register cpuidle driver [ 1.078028] sdhci: Secure Digital Host Controller Interface driver [ 1.082899] sdhci: Copyright(c) Pierre Ossman [ 1.085964] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.091751] ledtrig-cpu: registered to indicate activity on CPUs [ 1.096575] hid: raw HID events driver (C) Jiri Kosina [ 1.103716] usbcore: registered new interface driver usbhid [ 1.109028] usbhid: USB HID core driver [ 1.117451] mmc0: SDHCI controller on e0100000.mmc [e0100000.mmc] using ADMA [ 1.128519] fpga_manager fpga0: Xilinx Zynq FPGA Manager registered [ 1.139122] xt_time: kernel timezone is -0000 [ 1.142728] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 1.148073] NET: Registered protocol family 17 [ 1.151420] Registering SWP/SWPB emulation handler [ 1.155193] Loading compiled-in X.509 certificates [ 1.161481] mmc0: new high speed SDXC card at address aaaa [ 1.166892] mmcblk0: mmc0:aaaa SC512 477 GiB [ 1.169236] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.172121] mmcblk0: p1 p2 p3 [ 1.175772] clk: Not disabling unused clocks [ 1.180430] ALSA device list: [ 1.182095] No soundcards found. [ 1.220383] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.227488] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.240205] devtmpfs: mounted [ 1.243336] Freeing unused kernel memory: 1024K [ 1.284969] Run /sbin/init as init process [ 1.287754] with arguments: [ 1.287760] /sbin/init [ 1.287764] with environment: [ 1.287768] HOME=/ [ 1.287773] TERM=linux [ 1.417760] random: fast init done [ 1.846971] systemd[1]: System time before build time, advancing clock. [ 1.890353] systemd[1]: Failed to find module 'autofs4' [ 2.514777] NET: Registered protocol family 10 [ 2.518939] Segment Routing with IPv6 [ 2.543943] systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.565983] systemd[1]: Detected architecture arm. [ 2.615781] systemd[1]: Set hostname to . [ 4.351228] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 4.714278] systemd[1]: Queued start job for default target Graphical Interface. [ 4.722485] random: systemd: uninitialized urandom read (16 bytes read) [ 4.728134] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 4.739212] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 4.747468] systemd[1]: Created slice system-getty.slice. [ 4.784742] random: systemd: uninitialized urandom read (16 bytes read) [ 4.790835] systemd[1]: Created slice system-modprobe.slice. [ 4.824713] random: systemd: uninitialized urandom read (16 bytes read) [ 4.830781] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.865464] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 4.905217] systemd[1]: Created slice User and Session Slice. [ 4.945198] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.985081] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 4.996764] systemd[1]: Reached target Slices. [ 5.024861] systemd[1]: Reached target Swap. [ 5.056000] systemd[1]: Listening on Syslog Socket. [ 5.085383] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.125063] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.189430] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 5.197157] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.235673] systemd[1]: Listening on Journal Socket. [ 5.273093] systemd[1]: Listening on udev Control Socket. [ 5.305391] systemd[1]: Listening on udev Kernel Socket. [ 5.345443] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.352910] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped. [ 5.364000] systemd[1]: Mounting RPC Pipe File System... [ 5.397952] systemd[1]: Mounting Kernel Debug File System... [ 5.425270] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 5.432686] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 5.445938] systemd[1]: Starting Restore / save the current clock... [ 5.489943] systemd[1]: Starting Set the console keyboard layout... [ 5.525042] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 5.539787] systemd[1]: Starting Load Kernel Module configfs... [ 5.578298] systemd[1]: Starting Load Kernel Module drm... [ 5.608221] systemd[1]: Starting Load Kernel Module fuse... [ 5.638316] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.646568] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.657832] systemd[1]: Starting Journal Service... [ 5.690533] systemd[1]: Starting Load Kernel Modules... [ 5.737968] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.768196] systemd[1]: Starting Coldplug All udev Devices... [ 5.803830] systemd[1]: run-rpc_pipefs.mount: Mount process exited, code=exited, status=32/n/a [ 5.832461] systemd[1]: run-rpc_pipefs.mount: Failed with result 'exit-code'. [ 5.855769] systemd[1]: Failed to mount RPC Pipe File System. [ 5.924742] systemd[1]: Dependency failed for RPC security service for NFS client and server. [ 5.944739] systemd[1]: rpc-gssd.service: Job rpc-gssd.service/start failed with result 'dependency'. [ 5.952730] systemd[1]: Dependency failed for RPC security service for NFS server. [ 6.014101] random: crng init done [ 6.016198] random: 7 urandom warning(s) missed due to ratelimiting [ 6.024737] systemd[1]: rpc-svcgssd.service: Job rpc-svcgssd.service/start failed with result 'dependency'. [ 6.056371] systemd[1]: Mounted Kernel Debug File System. [ 6.095381] systemd[1]: Started Journal Service. [ 6.301765] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 6.736615] systemd-journald[1088]: Received client request to flush runtime journal. [ 6.741062] systemd-journald[1088]: File /var/log/journal/9a314adf4f7b4c659ada5035385c9b39/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 9.028232] Registered mathworks_ip class [ 9.091508] mwipcore 43c00000.mwipcore: IRQ index 0 not found [ 9.091529] mwipcore 43c00000.mwipcore: Dev memory resource found at 93db221b 0000FFFF. [ 9.091558] mwipcore 43c00000.mwipcore: 'mwipcore' device not found, creating [ 9.091571] mwipcore 43c00000.mwipcore: Char dev region registered: major num:240 [ 9.091579] mwipcore 43c00000.mwipcore: 'mwipcore' device created [ 11.539757] macb e000b000.ethernet eth0: PHY [e000b000.ethernet-ffffffff:00] driver [Marvell 88E1510] (irq=POLL) [ 11.539775] macb e000b000.ethernet eth0: configuring for phy/rgmii-id link mode [ 11.844116] 8021q: 802.1Q VLAN Support v1.8 [ 12.424139] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.454750] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS [ 12.492139] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.522212] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 15.697973] macb e000b000.ethernet eth0: Link is Up - 1Gbps/Full - flow control tx [ 15.698018] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 215.785180] ad9361 spi0.0: ad9361_probe : enter (ad9364) [ 216.098466] ad9361 spi0.0: ad9361_probe : AD936x Rev 0 successfully initialized [ 217.321149] cf_axi_adc 79020000.cf-ad9361-lpc: ADI AIM (10.01.b) at 0x79020000 mapped to 0xd202e27f, probed ADC AD9364 as MASTER [ 217.345286] cf_axi_dds 79024000.cf-ad9361-dds-core-lpc: Analog Devices CF_AXI_DDS_DDS MASTER (9.01.b) at 0x79024000 mapped to 0x6f5b9a0d, probed DDS AD9364 [ 227.605164] tx_intf: loading out-of-tree module taints kernel.

open-sdr / openwifi

sdr0 not showing up #280