Feat: OPX3.1-dev1 - Githubissues

GarrickHe commented 6 years ago

Feature: Add interface name and ifindex to the output list when querying for stats
Feature: Adding QSA support for 1G SFP media
Feature: VxLAN Support
Bugfix: Altered tap fd lock access to be called only after event add/del.
Bugfix: Used the right mgmt VRF name macro to skip the VRF object creation in the SAI for mgmt VRF.
Bugfix: Avoid sending multiple set requests for speed to PAS
Bugfix: Sending sequential hwport offset value from port group object to PAS for setting media transciever
Bugfix: Handle the mode change for lag blocked port in netlink handler
Bugfix: Get the port mode before adding port to LAG in kernel
Bugfix: Remove the publish of oper state just after connecting interface to NPU port
Bugfix: Using steady clock for providing independent timestamps
Bugfix: Unable to delete/clear L2MC on removal of port channel as VLAN member
Bugfix: MAC learn disable issue in vlan
Bugfix: The ability to set mac_lear_mode from CPS set for VXLAN
Update: Exclude vlan dir from compilation
Update: Enabled default libevent lock mechanism for multi thread access of event base.
Update: Setting transceiver enable/disable in PAS based on Admin State and not Oper State
Update: Adding port-group breakout mode for ethernet qsfp28 ports
Update: Allow ports to be added/removed from VLAN 1 in scaled vlan mode
Update: Re-apply admin state after membership changes
Update: Consolidate remote endpoint event into a single event with tunnnel ID
Update: Allow ports to be added/removed from VLAN 1 in scaled vlan mode
Update: Use separate service for mac address allocation
Update: Avoid sending multiple set requests for speed to PAS
Update: Set only ingress split horizon for pv subport
Update: Split horizon changes
Update: MAC learn mode for physical port, LAG
Update: set_speed method changed to support QSA adaptor
Update: Check profile type as DDQSFP28 for lane admin up
Update: Publish vlan sub interface event for regular vlan interfaces as well
Update: Support to do get on VXLAN type interface
Update: Send vlan sub interface transaction directly to base
Update: Correctly handle bridge name when deleting vlan
Update: Enable/disable interface packet drop status based on its tagged/untagged membership
Update: Send sequential hwport offset value from port group object to PAS for setting media transciever
Update: Handle the mode change for lag blocked port in netlink handler
Update: Get the port mode before adding port to lag in kernel
Update: Ignore duplex failure while interface creation
Update: Cache the default vlan id use default vlan id for vxlan in pv mode
Update: Use vlan id of 1q vlan for untagged port when ports are being migrated to 1d bridge
Update: Handle tunnel flood disable event and publish an event for the same
Update: Move untagged vlan to 1d bridge
Update: VxLAN changes to program npu first and then kernel

Signed-off-by: Garrick He garrick_he@dell.com

GarrickHe commented 6 years ago

Pull-request updated, HEAD is now d715d24f3e0bd0948a923150e4d479c512ef9568

GarrickHe commented 6 years ago

Pull-request updated, HEAD is now aa380efbc865da1f25b6e74149f331d2d162aff3

GarrickHe commented 6 years ago

Pull-request updated, HEAD is now 7fcf54504333f284ba8c28bebfda61cb2a9d911c

GarrickHe commented 5 years ago

Pull-request updated, HEAD is now 71eaa6f346561445185bf54b7b4ffca6e22ef4d0

GarrickHe commented 5 years ago

Pull-request updated, HEAD is now 71eaa6f346561445185bf54b7b4ffca6e22ef4d0

jeff-yin commented 5 years ago

Admin-merged this due to a buildkite timeout issue.

open-switch / opx-nas-interface

Feat: OPX3.1-dev1 #59