search

open3dengineering / i3_Berlin

Revised and improved version of Prusa-i3
42 stars 29 forks source link

Y-Beltholder + ZMotor need rework #5

Closed morriswinkler closed 10 years ago

morriswinkler commented 10 years ago

This small wall on the Y-Beltholder has to be made 2-3 times thicker 20140410_130039

Here the Z-MotorRight needs a little spare out here to let the motor connector pass also the left side would need that. 20140410_125836

vela3 commented 10 years ago

ok, this should work

also updated on the git blend file

On 04/10/2014 01:04 PM, morriswinkler wrote:

This small wall on the Y-Beltholder has to be made 2-3 times thicker 20140410_130039 https://cloud.githubusercontent.com/assets/4302527/2666557/89f42382-c09f-11e3-8247-ba2a43487294.jpg

Here the Z-MotorRight needs a little spare out here to let the motor connector pass also the left side would need that. 20140410_125836 https://cloud.githubusercontent.com/assets/4302527/2666558/8ecd2822-c09f-11e3-958c-e557fa72e3b3.jpg

— Reply to this email directly or view it on GitHub https://github.com/open3dengineering/i3_Berlin/issues/5.