search

openFyde / overlay-orangepi5-openfyde

openFyde supported hardware Orange Pi 5 build artefacts and pre-built image releases.
BSD 3-Clause "New" or "Revised" License
69 stars 5 forks source link

OPI 5 nvme SSD setup stucks on loading screen after installing to SSD from SD card. #37

Closed thadeustr closed 1 year ago

thadeustr commented 1 year ago

r114-r1. OPI 5 nvme SSD setup stucks on loading screen after installing to SSD from SD card. I tried... 2 different sd card. A1 high speed sd cards 2 different system to compile run file to img file Reseating nvme Formatting nvme... Tried with unformatted nvme Tried with ext4 formatted nvme

Every time setup stucks on loading screen

starwolf80 commented 1 year ago

Same this is happening to me with r114-r1 on standard Orange Pi 5, using NVME boot. It's just stuck there but not frozen, since I can click around and change date/time, It just doesn't want to leave loading screen, no matter how many times I reboot or how long I wait. Did it work on previous release?

thadeustr commented 1 year ago

Yes. İt is not frozen. But stuck on while first nvme boot. Activity led is blinking but it won't pass through loading screen. I did install first r114 version. But now version r114 and r108 instal stucks at loading like r114-r1

starwolf80 commented 1 year ago

Not sure what's going on, I've hooked it up again after few days, didn't change anything (maybe rearranged USB devices a bit) and now it boots up normally every single time. Strange.

Damenly commented 1 year ago

First boot requires loading fydeos EULA but something wrong happened on the page which blocks the page. It's fixed now.

carrie0105 commented 1 year ago

It's fixed now.

niels1voo commented 1 year ago

This is happening for me with 114-R1 on Orange Pi 5 plus. Burned with rpi imager to SD, wiped partition table on NVME, booted to SD with USB-C connected NVME, installed to NVME. Made it to wifi network, then "Loading..." ... stuck.

Update: cycled the power and it worked.