Hello. I'm still unable to upload my trainings to my movescount account. When I click on "Sync now", trainings from my Sunntoo watch are downloaded to my computer, but they are not uploaded to movescount account. I was NOT able to achieve this with v0.3, but also v0.4 don't works for me. This is frustrating. The error message I am getting is this:
Failed to upload log (err code: 202 ), movescount.com replied with " ""Device creation not allowed. Suunto devices must be created by POSTing a new UserDevice."" "
asyncPost: "https://uiservices.movescount.com/moves/?appkey=HpF9f1qV5qrDJ1hY1QK1diXhyPsX10Mh4JvCw9x3QSglJNLdcwr3540zFyLzIC3e&userkey=vwF5AvqrL0wRCt&email=myemail@gmail.com"
In openambit application:
File > Device sync > Device synchronization settings, all the checks (five) are enabled:
* Start sync automatically when the device is connected [ENABLED]
* Sync time from computer [ENABLED]
* Sync orbital data (from movescount) [ENABLED]
* Sync sport modes (from movescount) [ENABLED]
* Sync navigation (from movescount) [ENABLED]
File > Settings > Movescount connectivity, all the checks (three) are enabled:
* Check movescount for new versions [ENABLED]
* Generate debug files (XMLs stored in ~/.openambit/movescount [ENABLED]
* Sync logs with Movescount <myemail@gmail.com> [ENABLED]
I can provide debug (json) files under ~/.openambit/movescount if can be helpful. There are a lot of files generated.
Can some of you provide the full procedure to setup this to work as expected?
Hello. I'm still unable to upload my trainings to my movescount account. When I click on "Sync now", trainings from my Sunntoo watch are downloaded to my computer, but they are not uploaded to movescount account. I was NOT able to achieve this with v0.3, but also v0.4 don't works for me. This is frustrating. The error message I am getting is this:
In openambit application:
File > Device sync > Device synchronization settings, all the checks (five) are enabled:
File > Settings > Movescount connectivity, all the checks (three) are enabled:
I can provide debug (json) files under ~/.openambit/movescount if can be helpful. There are a lot of files generated.
Can some of you provide the full procedure to setup this to work as expected?
Thanks a lot in advance! :-)