Closed causten closed 8 years ago
If I restart the process then it becomes functional again.
[114922032403,7] AST: PNOR LPC offset: 0x0e000000 [114922100756,5] PLAT: Using SuperIO UART [114980667219,5] PLAT: Detected Palmetto platform [114993811755,5] CENTAUR: Found centaur for chip 0x0 channel 1 [114996510097,5] CENTAUR: FSI host: 0x0 cMFSI0 port 2 [114998666513,5] CENTAUR: ChipID 0x80000001 [DD2.0] [115001515171,5] PSI[0x000]: Found PSI bridge [working=1, active=0] [917265479,5] BT: Interface intialized, IO 0x00e4 [2455220760,3] BT seq 0x00 cmd 0x24: Retry sending message [3993730645,3] BT seq 0x00 cmd 0x24: Timeout sending message [5532426390,3] BT seq 0x01 cmd 0x22: Retry sending message
I ran dbus-monitor --system and no ipmi signals occured
Hi Chris,
Well spotted, btbridged was being too smart for its down good.
Thanks,
Cyril
fixed now with pull https://github.com/openbmc/btbridge/pull/3
If I restart the process then it becomes functional again.
[114922032403,7] AST: PNOR LPC offset: 0x0e000000 [114922100756,5] PLAT: Using SuperIO UART [114980667219,5] PLAT: Detected Palmetto platform [114993811755,5] CENTAUR: Found centaur for chip 0x0 channel 1 [114996510097,5] CENTAUR: FSI host: 0x0 cMFSI0 port 2 [114998666513,5] CENTAUR: ChipID 0x80000001 [DD2.0] [115001515171,5] PSI[0x000]: Found PSI bridge [working=1, active=0] [917265479,5] BT: Interface intialized, IO 0x00e4 [2455220760,3] BT seq 0x00 cmd 0x24: Retry sending message [3993730645,3] BT seq 0x00 cmd 0x24: Timeout sending message [5532426390,3] BT seq 0x01 cmd 0x22: Retry sending message