Open radiorob opened 6 months ago
This issue sounds more like a user error as opposed to something to chase down. When a mic is left on, it is left on.
But with that in mind, most automation systems can monitor a GPI from one of the many systems that can do GPIO's. Whether that is the Broadcast Tools units, SAS routing switchers, or something else (or even the inputs on a serial or parallel port). Then tie the logic output on a mic channel from a console to the input logic in the playout / automation system to toggle on / off the record (or whatever else you want to toggle on or off). It can provide a little better control then just silence detection which - if you end up with something like a ground hum or other noise coming out of a mic pre-amp or processor, that could really confuse silence detection.
On 2024-02-20 16:09, Rob Hopkins wrote:
Presently obplayer records and uploads live recording back to server. Input is analog line plugged into the 3.5mm jack and through silence detection.
End user left the Mic on for more than 2 months. So as designed, OB did silence detection and uploaded recordings to the server.
Wonder if Maintenance Mode would solve this, or add "also pause line in capture. Toggling this function would override everything and play FB media which is what it is supposed to do?
-- Reply to this email directly, view it on GitHub [1], or unsubscribe [2]. You are receiving this because you are subscribed to this thread.Message ID: @.***>
[1] https://github.com/openbroadcaster/obplayer/issues/125 [2] https://github.com/notifications/unsubscribe-auth/AC5JEH3OHJVV3QHZ3TVRSVDYUUGJ3AVCNFSM6AAAAABDR3WCV2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGE2DKMRYGU3DAMQ
Presently obplayer records and uploads live recording back to server. Input is analog line plugged into the 3.5mm jack and through silence detection.
End user left the Mic on for more than 2 months. So as designed, OB did silence detection and uploaded recordings to the server.
Wonder if Maintenance Mode would solve this, or add "also pause line in capture. Toggling this function would override everything and play FB media which is what it is supposed to do?