It's been a while since I tried CrankShaft, so wanting to use it; I imaged a card with the latest build as of 8/20/19, installed, and started it up. Everything seems to work great including bluetooth & AA over USB - everything except WiFi. My RPi doesn't have WiFi integrated, but have tried 3 different USB adapters - all of which I've used with RPis in the past and no matter what I try, the wlan0 interface is shown as "down."
Below are environmental details, what I've tried without luck and a debug log...
Environment Specs
RasPi: 3 B v1.2
Screen: Official Touch Screen
Power: 5V 2.1A -> RPi (Screen powered by pins on RasPi - No lightning bolt)
USB Bluetooth: Startech USBBT1EDR4
USB WiFi: DB-Link RTL8188CU / D-Link DWA-125 / Alfa AWUS036H
(I am 90% sure that I used the DWA-125 with an older build of CrankShaft a few months ago)
Phone: Samsung S9+ /w Latest OS build
CrankShaft Build: E2B068B 2019-08-08
What I've Tried
All 3 of the USB adapters above with shutting down & removing power in between each test
Powering the RPi & Screen separately using 5V/2.1A for each (Never get lightning bolt)
Enabling DEV mode and configuring WiFi within file in crankshaft folder of SD
Starting with only WiFi attached (no BT or phone) to ensure it wasn't a power issue
Verified CrankShaft was set to default of Client mode (not Hotspot)
Hey Guys -
It's been a while since I tried CrankShaft, so wanting to use it; I imaged a card with the latest build as of 8/20/19, installed, and started it up. Everything seems to work great including bluetooth & AA over USB - everything except WiFi. My RPi doesn't have WiFi integrated, but have tried 3 different USB adapters - all of which I've used with RPis in the past and no matter what I try, the wlan0 interface is shown as "down."
Below are environmental details, what I've tried without luck and a debug log...
Environment Specs
What I've Tried
Debug Log debug.zip
Any suggestions and/or is there an official HCL which lists compatible USB adapters?
Thanks!