TimeCard not visible on PCI bus after updating to FPGA rel 10

[MaciekMachni]

I tried to update my TimeCard to FPGA release 10, but it is not showing on the bus after the update.

Hardware:

Time Card Xilinx Platform Cable (Waveshare clone)

Software

Vivado Lab Edition 2022.1

Image

Factory_TimeCardProduction.bin release 10

Steps tested

• upgrade full flash to raw Factory_TimeCardProduction.bin
• Modified original dump and replace content starting @ 0x00400000 with theTimeCardProduction.bin
• Write bitstream directly to the FPGA RAM
• Update using devlink

Result

D14 is constantly lit, and the Time Card does not show on the bus. trying to upgrade with devlink ends up with: ptp_ocp 0000:02:00.0: Can't find Flash SPI adapter

Does this release require some hardware reworks? dmesg info about my HW:

[    4.516617] ptp_ocp 0000:02:00.0: enabling device (0100 -> 0102)
[    4.517114] ptp_ocp 0000:02:00.0: irq 16 out of range, skipping ts4
[    4.526202] ptp_ocp 0000:02:00.0: Version 1.2.0, clock PPS, device ptp0
[    4.526218] ptp_ocp 0000:02:00.0: Time: 1659174202.287690580, in-sync
[    4.526221] ptp_ocp 0000:02:00.0: version 8
[    4.526223] ptp_ocp 0000:02:00.0: regular image, version 8
[    4.526224] ptp_ocp 0000:02:00.0:  GNSS: /dev/ttyS5  @ 115200
[    4.526227] ptp_ocp 0000:02:00.0: GNSS2: /dev/ttyS6  @ 115200
[    4.526229] ptp_ocp 0000:02:00.0:   MAC: /dev/ttyS7  @  57600
[    4.526234] ptp_ocp 0000:02:00.0:  NMEA: /dev/ttyS8  @     -1
[ 2887.195004] ptp_ocp 0000:02:00.0: Can't find Flash SPI adapter

[MaciekMachni]

Using the SOM FPGA fixed the problem.