Closed GoogleCodeExporter closed 9 years ago
The chances are, either you have a bad install or your camera is faulty. If you
want me to take a look anyway, post a log.
Original comment by buhitoes...@gmail.com
on 17 Dec 2011 at 3:47
... how can i do a log?
Original comment by Petr.Pav...@gmail.com
on 17 Dec 2011 at 10:40
https://code.google.com/p/atrix-dev-team/wiki/Testing
Original comment by buhitoes...@gmail.com
on 17 Dec 2011 at 10:53
this happened with me once, restarted and never happened with me again. i think
some app like skype is using ur camera and not letting camera app to access
hardware.
Original comment by xat...@gmail.com
on 7 Jan 2012 at 6:57
[deleted comment]
So, here I have (finally) the logfile..
http://www.box.com/files/0/f/0/1/f_1406827339#/files/0/f/0/1/f_1406827339
Original comment by Petr.Pav...@gmail.com
on 8 Jan 2012 at 3:04
[deleted comment]
Same issue, here's my logcat : http://pastebin.com/ptjADbsc
Scroll down to reach the bug as I wasn't able to "> logcat.txt". Had to do it
manually from the command and prefered not to delete anything ! Thanks.
NB : FYI, this used to happen with CM7 ports to the HD2.
Original comment by danielmo...@gmail.com
on 18 Jan 2012 at 12:59
@comment 6: your log link requires me to log in to a box.net account, please
post a public link or use a pastebin
@comment 8: your log is truncated and rather full of twitter spam, but I see
"E/ImagerODM( 1344): NvOdmImagerI2cWrite: Send FAILED (dev:0xa6 err:0x2)".
Without a complete log and more info from you I can't tell for sure, but either
the camera hardware is on a bad state, or faulty. Does it happen always? If it
does, I'd check with a stock ROM (2.3 fruitcake), and take your phone for
warranty service if it doesn't work there either.
Original comment by buhitoes...@gmail.com
on 19 Jan 2012 at 11:58
Sorry for the messy log but like I said I couldn't log it properly.
Until now, I never experienced it with any stock ROM. I'll report if it happens
again...
Original comment by danielmo...@gmail.com
on 19 Jan 2012 at 12:28
Sorry... Here, again. I hope it's fine ;)
http://uploading.com/files/949d6ea8/camera_issue.txt/
Original comment by Petr.Pav...@gmail.com
on 19 Jan 2012 at 5:03
And here on pastebin: http://pastebin.com/RiSY6t0m#
Original comment by Petr.Pav...@gmail.com
on 19 Jan 2012 at 6:19
@comment 12: I see no camera errors on that log. In fact, you didn't even
launch the camera application :/
Original comment by buhitoes...@gmail.com
on 20 Jan 2012 at 7:28
Okay, this is really weird... I was playing with the camera app, and the front
camera works correctly. The LED on the back of Atrix is working correctly too.
The lense of the back camera is not damaged, and i don't know anytime when my
atrix fell down on the floor to me. I did logcat again:
http://www.box.com/s/gb6iekvjj88qx35l1ls4 (sorry, i haven't pro account on
pastebin). Thanks a lot for help. I appreciate it a lot :)
Original comment by Petr.Pav...@gmail.com
on 27 Jan 2012 at 10:54
Anybody? Please look somebody at that logcat.. I would just know if it's
hardware or software problem...
Original comment by Petr.Pav...@gmail.com
on 4 Feb 2012 at 11:55
Well, sounds like hardware to me. The writes over the I2C bus are failing, and
resetting the sensor does nothing. If I were you I'd test with a fruitcake to
confirm, and send it for repair if it doesn't work.
D/ImagerODM-sensor( 1349): Setting resolution to 1296x972, exposure 0.000000,
gains 1.000000
D/ImagerODM( 1349): WriteI2CSequence dev:6c
E/ImagerODM( 1349): FAIL 2 (line 153)
E/ImagerODM( 1349): FAIL 2 (line 153)
E/ImagerODM( 1349): FAIL 2 (line 225)
E/ImagerODM( 1349): FAIL 2 (line 225)
E/ImagerODM( 1349): FAIL 2 (line 225)
E/ImagerODM( 1349): FAIL 2 (line 242)
E/ImagerODM( 1349): WriteI2CSequence: Send FAILED (dev:6c err:0x2)
D/ ( 1349): Hard resetting the sensor.
D/ImagerODM-sensor( 1349): SensorBayer_SetPowerLevel 1
D/ImagerODM( 1349): SetPowerLevelWithPeripheralConnectivity PL=1 HWREV=0x83f0
D/ImagerODM( 1349): - NvOdmImagerPowerLevel_Off
V/ImagerODM( 1349): Power Off
D/ImagerODM-sensor( 1349): SensorBayer_SetPowerLevel 3
D/ImagerODM( 1349): SetPowerLevelWithPeripheralConnectivity PL=3 HWREV=0x83f0
D/ImagerODM( 1349): - NvOdmImagerPowerLevel_On
V/ImagerODM( 1349): Power On (0)
E/ImagerODM( 1349): NvOdmImagerI2cWrite: Send FAILED (dev:0x6c err:0x2)
E/ImagerODM-sensor( 1349): OTP: fail reset1
E/ImagerODM( 1349): NvOdmImagerI2cWrite: Send FAILED (dev:0x6c err:0x2)
E/ImagerODM-sensor( 1349): OTP: fail reset1
E/ImagerODM( 1349): NvOdmImagerI2cWrite: Send FAILED (dev:0x6c err:0x2)
E/ImagerODM-sensor( 1349): OTP: fail reset1
E/ImagerODM( 1349): NvOdmImagerI2cWrite: Send FAILED (dev:0x6c err:0x2)
E/ImagerODM-sensor( 1349): OTP: fail reset1
E/ImagerODM( 1349): NvOdmImagerI2cWrite: Send FAILED (dev:0x6c err:0x2)
E/ImagerODM-sensor( 1349): OTP: fail reset1
E/ImagerODM-sensor( 1349): FAILED to fetch OTP data
E/ImagerODM-sensor( 1349): unable to transfer focuser calibration data
D/ImagerODM-sensor( 1349): Setting resolution to 1296x972, exposure 0.000000,
gains 1.000000
Original comment by buhitoes...@gmail.com
on 5 Feb 2012 at 3:20
Oh, I was afraid of that... Thanks for help anyway ;)
Sadly, my phone is from USA (ebay) and i am from Czech republic, so i wil just
have phone without working cam... Or sometime i will try to change he camera
self...
Here is for interest logcat from 1.8.3 ATT fruitcake...
http://www.box.com/s/gb6iekvjj88qx35l1ls4
Thanks for all help :)
Original comment by Petr.Pav...@gmail.com
on 5 Feb 2012 at 2:05
Hi Petr,
I have just bought an Atrix off eBay just like you and am having the exact same
problem. Did you manage to fix your problem?
Here is my logfile if anyone can help me out: http://pastebin.com/e27CwbTB
Thanks
Original comment by lne...@gmail.com
on 6 Mar 2012 at 4:06
Original issue reported on code.google.com by
Petr.Pav...@gmail.com
on 17 Dec 2011 at 3:44