Update supported-smartphones.md

opendroneid / receiver-android

Example Android receiver application for unmanned aircraft Remote ID

Apache License 2.0

186 stars 61 forks source link

Update supported-smartphones.md #35

Closed janusw closed 2 years ago

janusw commented 2 years ago

Samsung Galaxy A71: WiFi Beacon works.
Note: The device I tested had Android version 11.
The transmitter device was a Parrot Anafi drone.

friissoren commented 2 years ago

Thanks for testing.

In general, with the latest version of the application, it should be possible to receive the Beacon signals on all devices running android 6 and higher (although with varying receive rate depending on the HW and SW). I need to add some generic comment about this to the table.

janusw commented 2 years ago

In general, with the latest version of the application, it should be possible to receive the Beacon signals on all devices running android 6 and higher (although with varying receive rate depending on the HW and SW).

I know. Will also test a few pre-11 devices soon ...

Do you think it's worth to measure and document rates as well?

I need to add some generic comment about this to the table.

It's mentioned in the ReadMe at least, which is sufficient to me.

friissoren commented 2 years ago

Do you think it's worth to measure and document rates as well?

That is probably going into too much details. It seems to somehow depend on the transmitter implementation as well (at least based on the limited testing I have done here with the EPS32 beacon and a desktop hostapd beacon implementation I am working on.)