neilchadwick-dg
commented
1 year ago I'm not an expert in hydrogeology, but I've worked with hydrogeologists so have some experience. Based on this and a little bit of research here are my thoughts on the general process...
The geological units in the geological observational model will be one of the main inputs to form a hydrogeological model with hydrogeological units (I've given my thoughts on hydrogeological units in #13). If the geological model does not yet exist then the hydrogeologist effectively has to create it themselves from the source borehole data!
Soil/rock description and some test data will also inform the construction of the hydrogeological model, i.e. helping determine how geological units map to hydrogeological units. However, this would generally be done at a high level, i.e. on the general dataset looking at units in general, not looking at individual results in space.
Surface water bodies will be an important part of any hydrogeological model, as they effectively provide boundary conditions for the analysis to follow. A good geological model will perhaps include these (FluidBodySurface #16 ?) , but that does not always happen! The hydrogeologist may need to find other inputs, e.g. from 2D mapping perhaps to fill the gaps.
Groundwater is the other critical input, of course. This is where things start to get complicated because:
- groundwater levels and pressures vary with time
- groundwater pressures may not be hydrostatic, e.g. confined aquifers, under-drained piezometric profiles, so the groundwater level (water table) is only part of the story
It would be useful to think about the methodology for providing information on groundwater pressure profiles. I've done it in written reports for geotechnical design but I'm not sure whether hydrogeologists have a robust and consistent way of doing it, in which case we should focus on that (they probably do as it will be an input to their analyses). Maybe the answer is in GroundwaterML - I've not looked.
The above is simplistic, covering just a basic model. Hydrogeologists deal with analysing pumping tests and all sort of other things. I would be out of my depth talking about those, so I will leave off here.
At this point I remind everyone that that groundwater levels/pressures are also relevant to geotechnical models and, in particular, geotechnical synthesis models that are intended to be used directly for design. For the latter the time problems goes away as a 'design' profile should have been determined.
mbeaufils
This is to explicit the data the (hydro)geologist / geotechnical engineer will try to find and look at in order to build a comprehension of the hydrogeological context of the project. The idea is to identify which APIs performing which queries on which data can help.