Register GeoSPARQL documents

[ghobona]

The URIs in the attached spreadsheet were submitted by the GeoSPARQL SWG on 2023-05-31.

Names Request.xlsx

Note that this GitHub Issue should only discuss the documents (i.e. URIs with a /doc segment).

[ghobona]

The document URIs are Persistent URLs (PURLs), so OGC Staff generally enable them once the documents have been approved by the Technical Committee and published.

[nicholascar]

Where do I get /ont IRIs from then? /ont was used in 2012 for GeoSPARQL 1.0 (viz.: http://www.opengis.net/ont/geosparql that resolves to RDF/XML). We want to update this to resolve to GeoSPARQL 1.1's RDF/Turtle data at https://raw.githubusercontent.com/opengeospatial/ogc-geosparql/master/1.1/geo.ttl

[ghobona]

@nicholascar

GeoSPARQL 1.0: Currently that is implemented as a redirect from http://www.opengis.net/ont/geosparql to http://schemas.opengis.net/geosparql/1.0/geosparql_vocab_all.rdf.

EO-GeoJSON: Currently the redirect is not enabled. The target would be https://schemas.opengis.net/eo-geojson/1.0/eo-geojson-vocabulary.owl. There are also JSON-LD and Turtle files in the same folder.

[nicholascar]

OK, I understand, this issue is about /doc and #240 is about /ont (and #238 is about /def)

[nicholascar]

Hi @ghobona can I just check: this seems to be the Issue that, when closed, will have make the GeoSPARQL doc IRI of http://www.opengis.net/doc/IS/geosparql/1.1 work. This IRI is the most critical one for us regarding visibility of the GeoSPARQL 1.1 specification document at https://opengeospatial.github.io/ogc-geosparql/geosparql11/spec.html.

Most of the ontology/concepts/functions IRIs are either working or are close to working, but what, if anything, do you need from us or TAB etc to get this doc IRI resolving?

[ghobona]

@nicholascar The IRI will be enabled once the Standard is published. It will not take long to enable the IRI but we have to make sure that the Standard document is ready, because errors post-publication would require a Corrigendum.

[nicholascar]

Hi @ghobona what do you mean by "once the Standard is published"? We - the DWG - are waiting for these IRIs to be allocated so we can put them in the document and put out media releases for the standard but you seem to be waiting for some other step to issue the IRIs. What is that other step? The standard has been approved as far as we can tell so what do you need from who to issue this IRI.

[ghobona]

@nicholascar When the Standard is published it is released through the OGC website, at an address that begins with https://portal.ogc.org/files/?artifact_id=A_NUMBER.

A record is then created on the page https://www.ogc.org/standard/geosparql/ , with a link for downloading/accessing the Standard document.

The IRI http://www.opengis.net/doc/IS/geosparql/1.1 will then be configured to redirect/proxy through to https://portal.ogc.org/files/?artifact_id=A_NUMBER

I sent the @jabhay my review of the Standard document last week. Once the requested edits have been made, the SWG should let @ogcscotts know so that we can proceed with the publication of the Standard.

Please note that @situx has fixed some of the issues. So you will need to coordinate with @situx and @jabhay on making the requested edits.

[nicholascar]

@ghobona, ok we - @situx, me and the GeoSPARQL DWG - are addressing the three issues you raised on the GeoSPARQL document now and, when don, we will let @ogcscotts know. Thanks for clearing up this step

[ghobona]

This URI has now been enabled http://www.opengis.net/doc/IS/geosparql/1.1

The URIs of specification elements have also been enabled https://github.com/opengeospatial/NamingAuthority/blob/master/specification-elements/mappings/22-047r1.csv